FMFPAX Epoxy Resin AB Glue Dispensing Machine 228AB, Pneumatic Dual Liquid Dispenser, 500mL Semi-Automatic, 110V/220V

The 228AB is a pneumatic dual liquid AB glue dispensing machine for epoxy resin. This semi-automatic 500mL setup comes with glue tanks and accessories, runs on 0.8 MPa (116 psi) compressed air and is available as a 110V board version or a 220V version, so you can use it as an epoxy resin dispenser for potting, filling and casting at the bench.

Key Features

• Pneumatic dual liquid design with two glue tanks for AB glue, shown in the photos.
• Rated for 0.8 MPa (116 psi) compressed air.
• Front panel with a dispensing-time timer, two air gauges (AIR I and AIR II) and two pressure regulators (PRESSURE I and PRESSURE II).
• Low electrical load: 8 W or less on AC 220V ±10%.
• Compact body, 240 x 160 x 140 mm (9.4 x 6.3 x 5.5 in), 4 kg (8.8 lb) net.

Epoxy Resin Dispensing Machine for Potting, Filling and Casting

The listing covers resin work: glue potting (filling), glue filling, resin casting and general glue application. It is a two-component dispensing machine, so it is set up for AB epoxy rather than hot melt or single-part glue.

Who it's for / Not for

Who it's for

• Workshops that dispense epoxy resin or AB glue from tanks (listed workpiece: resin).
• Users with a compressed air line rated 0.8 MPa (116 psi).
• Buyers in the US, Mexico and Canada who need a 110V machine.
• Benchtop setups with room for a 240 x 160 x 140 mm (9.4 x 6.3 x 5.5 in) machine.

Not for

• Not for use without compressed air: it is pneumatic.
• Not an electric-pump or peristaltic dispenser; for that, see the TP50 below.

Choose Your Voltage

Compare with Other Glue Dispensers

Choose the 228AB if you dispense AB epoxy from tanks with compressed air; choose the TP50 if you dispense watery low-viscosity glue and have no air compressor; choose the hot melt dispenser if you apply hot melt adhesive.

Product Details

FAQ

What is an AB glue dispensing machine used for?

It dispenses two-part (AB) glue such as epoxy resin from glue tanks. A two-part epoxy has a part A and a part B, and its working time (pot life) limits how long mixed material stays usable, so plan batch size to the glue you use. The 228AB is listed for epoxy resin work.

Is this a pneumatic or an electric glue dispenser?

It is a pneumatic glue dispenser: the dispensing is powered by compressed air. The control electronics run on AC 220V ±10% (or the 110V board version) and draw 8 W or less.

Do I need an air compressor, and what air pressure does it use?

Yes, you need a compressed air supply. The rated air pressure is 0.8 MPa (116 psi). An air compressor is not listed as part of this configuration.

What is the difference between this machine and a manual AB glue gun?

A manual AB glue gun is pushed by hand. The 228AB is air-powered, takes glue from tanks and has a dispensing-time timer on the front panel, so it suits repeated shots better than hand squeezing.

Pneumatic vs peristaltic dispenser: which should I choose?

Choose the 228AB if you dispense AB epoxy from tanks and have compressed air at 0.8 MPa (116 psi). Choose a peristaltic dispenser such as our TP50 if you dispense watery, low-viscosity glue and want to work without an air compressor. See the comparison table above.

Semi-automatic vs automatic glue dispenser: which one is this?

This listing is the semi-automatic 500mL configuration. If you need a fully automatic or robot-mounted system, contact us before ordering so we can confirm what is available.

Is there a 110V version of this epoxy dispenser?

Yes. Select 110V in the Voltage option if you are in the US, Mexico or Canada. Both a 110V board version and a 220V version are available. The 220V version is rated AC 220V ±10%.

What size are the glue tanks?

This is the 500mL configuration and it includes glue tanks with the standard package.

What is included, and what are the size and weight?

Included in the standard package: the 228AB machine, glue tanks (500mL configuration), dispensing pen and dual-head controller. Machine size is 240 x 160 x 140 mm (9.4 x 6.3 x 5.5 in); net weight is 4 kg (8.8 lb); shipping weight is about 7 kg (15.4 lb).

Can I use it for resin potting, filling and casting?

It is listed for resin work, including glue potting (filling) and resin casting. The viscosity range and cure-time limits are not published, so tell us your resin and we will confirm fit before you order.

Related Products and Resources

• Glue and Adhesive Equipment: all our glue and adhesive machines.
• TP50 Peristaltic Glue Dispenser: no air compressor, for low-viscosity glue.
• Hot Melt Glue Dispenser Machine: foot-pedal dispensing for hot melt adhesive.
• Liquid Filling Machines: filling machines for other liquids and pastes.