FMF Supply
EPC-A12 CCD Edge/Line Web Guide System with PD403L150T 400kg Actuator
EPC-A12 CCD Edge/Line Web Guide System with PD403L150T 400kg Actuator
Couldn't load pickup availability
EPC-A12 CCD edge/line web guide system with PD403L150T actuator
This listing is for an EPC-A12 controller kit supplied with an HCCD/CCD camera sensor and a PD403L150T servo actuator. In this configuration, the set is intended for visible edge, contrast edge, printed line, printed mark and pattern tracking on roll-to-roll web materials.
The EPC-A12 controller platform can work with different sensor categories when the correct sensor is matched to the guiding task. This page is for the CCD camera sensor configuration. Ultrasonic, photoelectric and other sensor setups are separate configurations unless specifically confirmed.
What this CCD set is for
- Edge/line position control where the CCD sensor can see a clear edge, line, printed mark or contrast target
- Printed web guiding for packaging, label, film and converting lines
- EPC edge guiding and LPC line guiding tasks that need camera-based target recognition
Sensor fit
| Included sensor type | HCCD/CCD digital camera sensor for line position and edge/mark tracking |
| Best-fit targets | Visible edge, contrast edge, printed line, printed mark, pattern target |
| Before ordering | If the target is transparent, low contrast, irregular, or difficult to see, share material photos, line speed and guiding target so the sensor match can be checked. |
Controller platform capability vs. this kit
| EPC edge guiding | Available when the CCD sensor can identify the web edge or contrast edge |
| LPC line guiding | Available when the CCD sensor can identify a visible line, printed mark or pattern |
| CPC center guiding | Requires a matching center or dual-edge sensor arrangement |
| SPC serpentine correction | Depends on the machine layout and matched sensor/control configuration |
Main features of the included set
- EPC-A12 edge/line position controller with color screen and manual/auto controls
- HCCD/CCD camera sensor for visible edge, line, printed mark and pattern tracking
- PD403L150T precision linear actuator with 150 mm travel, 400 kg thrust and 30 mm/s speed
- Linear position encoder feedback on the included actuator
- Included power supply accepts 100-240V AC input
Package contents
| EPC-A12 edge/line position controller | 1 set |
| HCCD/CCD camera sensor | 1 pc |
| PD403L150T servo actuator | 1 set |
| Power supply | 1 pc, AC100-240V input |
| Cables and bracket mount | Included |
EPC-A12 controller specifications
| Model | EPC-A12 |
| Controller supply voltage | DC 24V-45V, standard 24V |
| Motor drive capacity | 24V-45V, max 10A |
| Encoder power supply | DC 15V, max 200mA |
| Analog inputs | 3 channels, 0-5V, 20K ohm impedance |
| Sensor power supply | DC 12V, max 350mA |
| Correction response time | 0.5 ms |
| Analog input resolution | 12-bit ADC |
| Switch inputs | 3-channel NPN |
| Supported sensor categories | Ultrasonic, photoelectric and CCD, matched according to the guiding task |
| Controller drive speed range | 1-75 mm/s |
| Protection rating | IP53 |
Included CCD sensor and actuator
| CCD sensor use | Visible edge, contrast edge, line, printed mark and pattern tracking |
| Sensor setup | Target setup is required so the sensor knows what edge, line or mark to track |
| Actuator model | PD403L150T |
| Actuator application | EPC/LPC web guiding system |
| Actuator travel | 150 mm |
| Actuator thrust | 400 kg |
| Actuator speed | 30 mm/s |
| Position feedback | Linear position encoder |
Ordering notes
- This standard set includes the HCCD/CCD camera sensor and PD403L150T actuator.
- It does not include ultrasonic, photoelectric or dual-edge center-guiding hardware unless separately confirmed.
- For low-contrast targets, transparent targets, center guiding, serpentine correction setup or a different actuator stroke/thrust, contact us before ordering.
- The plug and voltage are configured according to the customer's shipping country by default.
- For matching support, share the web material, web width, line speed, target type and installation space.
FAQ
What is included in this EPC-A12 set?
One set includes the EPC-A12 edge/line controller, HCCD/CCD camera sensor, PD403L150T servo actuator, AC100-240V power supply, cables and bracket mount.
What guiding task is this CCD set for?
It is for camera-based edge and line guiding where the sensor can identify a visible edge, contrast edge, printed line, printed mark or pattern.
Can it track printed marks?
Yes. The included CCD sensor is intended for visible printed mark, line and pattern tracking after the target is set up.
Can this standard set do center guiding?
The EPC-A12 controller can be configured for more than one guiding mode, but this standard CCD set is sold for edge/line target tracking. Center guiding needs the matching sensor arrangement.
What actuator is included?
The included actuator is PD403L150T, with 150 mm travel, 400 kg thrust, 30 mm/s speed and linear position encoder feedback.
What should I check before ordering?
Check whether the CCD sensor can clearly see the edge, line, printed mark or pattern to be tracked. For transparent, low-contrast or irregular targets, contact us before ordering.
