FMFPAX Manual Blister Pill Remover User Manual: Setup, Operation & Cleaning
This English user manual covers the FMFPAX Manual Blister Pill Remover, a bench-top tool that pushes tablets and capsules out of blister packs into a collection tray. It explains the specifications, main components, handle adjustment, gap setting, feeding direction for each pill row, pill removal, cleaning, and the packing list.
English PDF manual
PDF, 9 pages, approximately 1.4 MB
Download the FMFPAX Manual Blister Pill Remover user manual (PDF)
On this page: Specifications · Main components · Handle adjustment · Operating instructions · Cleaning · Packing list · FAQ
Specifications
| Item | Specification |
|---|---|
| Brand | FMFPAX |
| Product name | Manual Blister Pill Remover |
| Applicable products | All tablets and capsules in blister packs, except blister packs with a staggered or offset pill layout |
| Overall dimensions | 24 × 16.5 × 23 cm (approx. 9.4 × 6.5 × 9.1 in) |
Main Components
The pill remover has three main parts: the hand press (a roller with an adjustable handle), the operating table on which the blister pack is placed, and the large collection tray that catches the removed pills.
Handle Adjustment
The pill remover is shipped fully assembled and is ready to use straight out of the box. The handle position can be rotated to the left or right to suit your working habits.
- Press and hold the screw on top of the lever with your finger.
- Lift the lever up.
- Turn the lever to the desired position, then release it.
Operating Instructions
The gap of the operating table is set with the adjustment knob at the front of the machine, next to the collection tray.
Step 1: Adjust the Gap
Turn the adjustment knob to set the gap of the operating table according to the size of the pills in the blister pack. Make sure the gap is slightly larger than the pills.
Step 2: Choose the Feeding Direction
- Outer rows: insert the blister pack into the operating table in the direction shown by the arrow to remove the pills in the two outer rows.
- Middle row: place the blister pack on the operating table as shown in the second photo to remove the pills in the middle row.
Step 3: Remove the Pills
Hold the handle, press down firmly and roll the hand press back and forth over the blister pack. The pills are pushed out and drop into the collection tray.
Step 4: Hold the Blister Pack in the Blister Slot
The operating table has a blister slot. During use, insert one aluminum-foil edge of the blister pack into the slot to hold the pack firmly in place.
Regular Cleaning
With long-term use, dust and medicine powder build up on the machine and the collection tray, so clean them regularly.
Note: clean with alcohol wipes only.
Packing List
| No. | Item | Qty |
|---|---|---|
| 1 | FMFPAX manual blister pill remover | 1 unit |
| 2 | Collection tray | 1 pc |
| 3 | User manual | 1 copy |
Manual Blister Pill Remover FAQ
Which blister packs can the pill remover process?
It works with all tablets and capsules in blister packs, except blister packs with a staggered or offset pill layout.
Does the pill remover need to be assembled?
No. It is shipped fully assembled and is ready to use straight out of the box.
How do I set the gap for different pill sizes?
Turn the adjustment knob until the gap of the operating table is slightly larger than the pills in the blister pack.
How do I remove the pills in the middle row?
The outer rows are fed into the operating table in the direction of the arrow. For the middle row, place the blister pack on the operating table as shown in the Step 2 photo, then roll the hand press over it.
How should the machine be cleaned?
Clean the machine and the collection tray regularly to remove dust and medicine powder, using alcohol wipes only.
Can the handle be moved for left- or right-hand use?
Yes. Press and hold the screw on top of the lever, lift the lever, turn it to the left or right, then release it.
Product and Support
View the FMFPAX Manual Blister Pill Remover product page. For questions about this machine, email sales@fmfpack.com.