OWON ODP3033 198W Triple Output Programmable DC Power Supply

Product Overview

The OWON ODP3033 is a 198W triple output programmable DC power supply for electronics test benches, repair work, and controlled DC output setup. It provides three independent controllable channels: two 0-30V / 0-3A outputs and one 0-6V / 0-3A output.

This model is useful when a technician or engineer needs multiple DC rails from one bench instrument, with front-panel control plus computer communication through USB, RS232, and LAN.

Verified Output and Control Details

• Model: OWON ODP3033
• Output channels: 3 independent controllable channels
• CH1 and CH2: 0-30V, 0-3A, 90W each
• CH3: 0-6V, 0-3A, 18W
• Maximum output power: 198W
• Setting resolution: 1mV / 1mA
• Readback resolution: 1mV / 1mA
• Working modes: individual, parallel, and series
• Protection functions: over-voltage protection and over-current protection
• Display: 4 inch color LCD, 480 x 320 pixels
• Communication interfaces: USB, RS232, and LAN
• Control support: SCPI and LabVIEW supported
• Programmable output storage: up to 100 groups
• Data recording: 10K groups for voltage, current, and power data
• Dimensions: 250 x 158 x 358 mm
• Device weight: about 9.8 kg
• Working temperature: 0-40 C

Front and Rear Panel Notes

The front panel includes separate terminals for CH1, CH2, and CH3, a numeric keypad, CV/CC controls, program and record buttons, a USB port, and a color LCD for output monitoring.

The rear panel shown in the product images includes LAN, USB Device, COM, cooling fan, AC inlet, and a label showing 110V +/-10% AC, 50/60Hz. Please confirm the required mains input and plug before ordering if your workspace uses a different AC standard.

When to Choose This Power Supply

• Choose the ODP3033 when you need two adjustable 30V / 3A outputs plus a third 6V / 3A output in one instrument.
• Use it for electronics testing where programmable timing, data recording, and repeatable output settings are useful.
• Choose a higher-output model if your work requires more than 3A on each 30V channel or more than 6V on the third channel.

Shown Accessories

The product photos show the power supply together with a power cord, USB cable, disc/manual pack, and spare fuse. Please confirm accessory requirements before ordering if your lab or workshop has a specific cable, plug, or software setup requirement.

FAQ

How many outputs does the OWON ODP3033 provide?

It provides three independent controllable outputs: CH1 and CH2 are 0-30V / 0-3A, and CH3 is 0-6V / 0-3A.

Is the ODP3033 programmable?

Yes. It supports programmable output storage, timing output settings, data recording, and communication through USB, RS232, and LAN.

Can the channels be used in different operating modes?

The OWON ODP series supports individual, parallel, and series working modes. Confirm your wiring and load requirements before using combined-output modes.

What input voltage should I confirm?

The photographed rear label shows 110V +/-10% AC, 50/60Hz. Confirm the input voltage and plug requirement before ordering, especially for regions using a different AC mains standard.

What should I compare before choosing this model?

Check the required voltage range, current range, number of output channels, communication interface, display/control style, and whether your test setup needs the ODP3033 output limits or a higher-output OWON model.