FMF

M9714 Programmable DC Electronic Load 0-150V 0-240A 1200W for Battery and Power Supply Testing

$1,521.79 USD

~~$0.00 USD~~ $1,521.79 USD

Sale Sold out

Taxes included. Shipping calculated at checkout.

Programmable DC Electronic Load for Bench Power Testing

The M9714 is a programmable DC electronic load for power supply, battery, charger, and DC source testing. It provides a 0-150V, 0-240A, 1200W load range for test benches that need controlled current, voltage, resistance, or power loading.

Use it to check DC output behavior, discharge performance, protection response, and load stability on compatible power supplies, battery packs, converters, chargers, and other DC equipment within the rated range.

Key Features

Programmable DC electronic load for electrical test benches.
Rated range: 0-150V, 0-240A, 1200W.
Operating modes include CC, CR, CV, CW, CC+CV, and CR+CW.
Supports battery testing and short-circuit test functions.
Dynamic testing supports rising-edge and falling-edge setting.
External trigger input/output for linked test setups.
Current waveform monitor terminal for observing load current behavior.
Front-panel keypad, rotary knob, display, and high-current input terminals for bench operation.

Specifications

Model	M9714
Instrument type	Programmable DC electronic load
Voltage range	0-150V
Current range	0-240A
Power rating	1200W
Operating modes	CC, CR, CV, CW, CC+CV, CR+CW
Test functions	Battery test, short-circuit test, dynamic test
Terminals and interfaces	Input terminals, external trigger input/output, current waveform monitor terminal
SKU	FMF-M9714-55705
Shipping weight	20 kg

Typical Applications

DC power supply load testing.
Battery discharge and capacity-related bench checks.
Charger, converter, and DC source output testing.
Protection-response checks under controlled load conditions.
Dynamic load testing for electronics development and maintenance work.

Selection Notes

Confirm that the device under test stays within the 0-150V, 0-240A, and 1200W limits.
Prepare suitable wiring, terminals, and cooling space for high-current bench testing.
Choose the operating mode according to the test target: CC for constant current, CV for constant voltage, CR for constant resistance, or CW for constant power.
For special fixture, trigger, or monitoring requirements, contact us before ordering.

FAQ

What is the M9714 used for?

It is used as a programmable DC load for testing power supplies, batteries, chargers, converters, and other compatible DC sources.

What are the voltage, current, and power limits?

The listed range is 0-150V, 0-240A, and 1200W.

Which load modes are available?

The listed operating modes include CC, CR, CV, CW, CC+CV, and CR+CW.

Can it be used for battery testing?

Yes. Battery testing is one of the listed test functions, as long as the battery and test setup stay within the rated limits.

What should I confirm before buying?

Confirm voltage, current, power, wiring, cooling space, and the required load mode for your test setup.

View full details