FMF Supply
ITECH IT8512+ 120V 30A 300W Programmable DC Electronic Load
ITECH IT8512+ 120V 30A 300W Programmable DC Electronic Load
Couldn't load pickup availability
ITECH IT8512+ 120V 30A 300W Programmable DC Electronic Load
The ITECH IT8512+ is a single-channel programmable DC electronic load for power test benches, battery evaluation, charger testing and DC power supply verification. This model is rated for 0-120V, 0-30A and 300W, making it suitable for controlled sink-load testing within those limits.
The front panel shows the IT8512+ model label, 120V/30A/300W rating, VFD readout, numeric keypad, rotary knob, CC/CV/CR/CW mode keys and positive/negative input terminals. The rear panel shows ventilation, AC input, a line-rating label, a COM(TTL) communication port and an I Monitor connector.
Key Features
- Single-channel programmable DC electronic load for bench testing.
- Rated input range: 0-120V, 0-30A, 300W.
- CC, CV, CR and CW operating modes for different load test conditions.
- High-resolution voltage and current measurement; the listing highlights 1mV and 0.1mA resolution.
- Battery test, short test, automatic test and dynamic/list-style load testing functions supported by the IT8500+ series documentation.
- OCP, OVP, OPP and OTP protection functions listed for the series.
- VFD display, numeric keypad, rotary knob and front input terminals for direct bench operation.
- Remote sense function and rear COM(TTL) communication port; confirm any optional interface cable requirements before ordering.
Specifications
| Brand | ITECH |
| Model | IT8512+ |
| Product type | Programmable DC electronic load |
| Channel | Single channel |
| Rated voltage | 0-120V |
| Rated current | 0-30A |
| Rated power | 300W |
| Operating modes | CC, CV, CR, CW |
| Display | VFD front-panel display |
| Control interface shown | Rear COM(TTL) port |
| Rear monitoring connector | I Monitor connector shown on product image |
| Line input note | Rear label lists 100/110/220/240 Vac fuse options; the photographed unit is set to 220V. Confirm input setting before use. |
| Dimensions | 214.5 x 88.2 x 354.6 mm |
| SKU | FMF-IT8512-79193 |
Typical Uses
- Testing DC power supplies under controlled load conditions.
- Battery discharge and capacity-related test workflows within the rated range.
- Charger and DC-DC converter load testing.
- Production, repair or R&D benches that need programmable CC/CV/CR/CW load modes.
Accessories And Selection Notes
- Product photos show an AC input cable and calibration paperwork beside the unit; confirm exact included documents and accessories for the current order.
- The rear panel is marked COM(TTL). Do not assume USB, RS232 or GPIB are built in unless the required optional cable/interface is confirmed.
- Choose this model when you specifically need a 120V / 30A / 300W electronic load. If your test requires higher voltage, current or power, select a larger model instead.
- Confirm input voltage setting, plug type, optional communication accessories and procurement paperwork requirements before purchasing.
FAQ
What is the IT8512+ used for?
It is used as a programmable DC electronic load for testing power supplies, batteries, chargers and DC-DC converters within its 0-120V, 0-30A and 300W ratings.
Which load modes are available?
The front panel and product information support CC, CV, CR and CW load modes.
Does this unit have USB or RS232 built in?
The photographed rear panel shows COM(TTL). If USB, RS232, GPIB or other remote-control accessories are needed, confirm the exact optional cable or interface before ordering.
