• ITECH IT8211 60V 30A 150W programmable DC electronic load front panel with LED display
  • ITECH IT8211 DC electronic load with power cord shown beside the unit
  • ITECH IT8211 rear panel with line rating selector power inlet and factory-use DB9 port
  • ITECH IT8211 electronic load front controls with CC CV CR Short and 30A indicators
1 4

FMF Supply

ITECH IT8211 Programmable DC Electronic Load 60V 30A 150W

ITECH IT8211 Programmable DC Electronic Load 60V 30A 150W

$235.78 USD
$0.00 USD $235.78 USD
Sale Sold out
Taxes included. Shipping calculated at checkout.

ITECH IT8211 Programmable DC Electronic Load 60V 30A 150W

The ITECH IT8211 is a compact programmable DC electronic load for power-supply testing, battery discharge checks, production test benches, maintenance lines, and electronics troubleshooting. Official ITECH data lists the IT8211 at 60V, 30A, and 150W, with 1mV/1mA resolution and CC, CV, and CR operating modes.

The current product photos show the IT8211 front panel with LED voltage/current display, Prog, Short, CC, CV, CR, 30A and Shift indicators, a rotary encoder, front input terminals, side ventilation, rear power inlet, and a rear DB9 port marked for factory use only.

Verified Product Details

Brand ITECH
Model IT8211
Product type Programmable DC electronic load
Voltage / current / power rating 60V, 30A, 150W
Operating modes CC, CV, CR
Resolution 1mV / 1mA
Accuracy listed by ITECH +/- (0.05% + 0.1% FS)
Memory recall 4 x 40 groups
Short-circuit test Listed by ITECH and shown on the front panel
Display and controls LED display, function keys, rotary encoder, front input terminals
Line rating shown on rear panel 50/60Hz, 30VA max; selector shown at 220V in current photos
Dimensions listed by ITECH 88 mm W x 175 mm H x 282 mm D
SKU FMF-IT8211-03001

Typical Applications

  • Testing DC power supplies under controlled load conditions
  • Battery discharge and capacity-related checks within the 60V / 30A / 150W rating
  • Production-line, maintenance-line, lab, and education test setups
  • Electronics repair workflows that need CC, CV, or CR load behavior

Selection Notes

  • Choose this model when your test setup needs an IT8211 or a 150W programmable DC electronic load.
  • Confirm voltage, current, and power limits before connecting the device under test.
  • The rear panel photos show multiple line-voltage markings and the selector set to 220V; confirm input voltage, fuse, and power cord needs before ordering.
  • The DB9 connector is marked for factory use only; confirm with the supplier before relying on that rear port for your setup.

FAQ

What is the IT8211 rated for?
ITECH lists the IT8211 as a 60V, 30A, 150W DC electronic load.

Which load modes does it support?
The verified modes are CC, CV, and CR, with a short-circuit test function listed for this series.

Can it be used for battery testing?
Yes, when the battery test stays within the 60V, 30A, and 150W limits. Always confirm discharge current, wiring, and safety requirements before use.

View full details