RY-2S Tablet & Capsule Counter User Manual

This English user manual covers the RY-2S semi-automatic tablet and capsule counter shown on the associated FMF desktop counting-machine product page. It explains machine setup, touchscreen controls, counting settings, sensor adjustment, container positioning, and routine cleaning.

Download the RY-2S manual

Download the RY-2S tablet and capsule counter user manual (PDF)

English · 21 pages · approximately 2.07 MB

RY-2S semi-automatic tablet and capsule counter with touchscreen and dual outlets

Quick navigation

RY-2S machine overview

The RY-2S uses a vibrating disc and dust-resistant photoelectric counting system to separate and count products before dispensing them into bottles, boxes, or bags. Supported products listed in the manual include capsules, softgel capsules, tablets, irregular tablets, pills, candies, grains, and seeds.

  • OMRON fiber-optic sensing with PLC and touchscreen control.
  • SUS304 stainless-steel product-contact surfaces.
  • Two discharge outlets that operate alternately.
  • Adjustable support tray for containers of different heights.
  • Removable channel cover and hopper for easier cleaning.

Technical specifications

RY-2S specifications stated in the supplied English manual
Model RY-2S
Machine dimensions 40 × 37 × 58 cm
Power supply AC 110–220 V, 50/60 Hz
Rated power 30 W
Net weight 20 kg
Listed capacity 300–800 pieces/min

Setup and operation

  1. Adjust the hopper outlet opening to suit the product shape and flow.
  2. Move the guide paddle so products enter the counting channel evenly in a single file.
  3. Raise or lower the support tray and position the container opening beneath the active discharge outlet.
  4. Connect a compatible regional power cord to the universal power inlet.
  5. Set the required pieces per container and the number of containers on the touchscreen.
  6. Press the green Start button to start vibration; use the speed-control knob to adjust product flow.
  7. Press the red Stop button to stop vibration.

Touchscreen controls and settings

Main RY-2S touchscreen fields
Control Function
Set Unit Sets the number of pieces dispensed into each container.
Set Production Sets the total number of containers for the production run.
Current Production Shows the cumulative number of completed containers.
Unit Reset Clears the current piece count.
Production Reset Clears the completed-container count.
Left / Right Manually selects the active discharge outlet.

Hidden settings

Select the padlock icon and enter the manual's stated password, 888888, to open the hidden settings screen. The manual lists these defaults: FILTER 0, MOTOR ON TIME 100 ms, DELAY FOR SWITCH 0 ms, LEFT ANGLE 31.00, RIGHT ANGLE 31.00, SPEED 5 r/s, and ACC&DIC 50,000. For transparent products such as softgel capsules, the stated FILTER range is 25,000–50,000.

Photoelectric sensor adjustment

  1. After transport, confirm that the fiber-optic cable is securely connected.
  2. Open the sensor cover and press the TUNE button three times in succession to reset the sensor.
  3. Use the minus (−) key to lower the green value below the red value; the manual shows an approximate green value of 9,600.

Cleaning the counting channel and hopper

  1. Loosen the two channel-cover screws and remove the transparent cover.
  2. Wipe the counting channel clean.
  3. Loosen the two hopper fasteners and remove the hopper for easier cleaning.
  4. Reinstall the removed parts securely before returning the machine to service.

Frequently asked questions

What can the RY-2S count?

The supplied manual lists capsules, softgel capsules, tablets, irregular tablets, pills, candies, grains, and seeds. Product flow and sensor settings should be adjusted to the actual material.

What is the RY-2S counting capacity?

The manual lists a capacity of 300–800 pieces per minute. Actual output depends on the product and operating setup.

How do I improve counting accuracy after transport?

Check the fiber-optic cable connection, reset the sensor using the TUNE button, and confirm the threshold setting described above.

How are the two outlets selected?

The outlets operate alternately during production. The Left and Right touchscreen controls can manually select the active outlet.

Related product and support

View the FMF desktop capsule and tablet counting machine or contact FMF Supply for product and application questions.