FMF
JDT-12A Commercial High Pressure Misting Pump 220V, Oil-Free Self-Lubricating Fog Machine 4-7 MPa, 1.2 L/min Misting System with Self-Priming & Water Shortage Protection for Outdoor Patio Cooling
No se pudo cargar la disponibilidad de retiro
Commercial High Pressure Misting Pump
The JDT-12A is a 220V commercial high pressure misting pump for outdoor patio cooling, micro mist nozzle layouts, humidification, spraying, and dust reduction systems. It combines an oil-free self-lubricating high pressure plunger pump head, smart LCD timing control, self-priming function, and water shortage protection in one compact host.
For buyers comparing high pressure misting pump specifications, the key checks are 4-7 MPa working pressure, 1.2 L/min flow, 180 W rated power, AC220V 50Hz input, and approximately 5-10 micron fine mist output.
Choose between the main unit set and the complete misting system set according to the required tube length, nozzle count, and installation layout.
Available Configurations
| Configuration | Included selection |
|---|---|
| JDT-12A Smart Main Unit | Smart high pressure misting machine host only |
| Standard Kit + No. 1 Micro Mist, 22 Nozzles, 40 m Tube | Standard kit with No. 1 micro mist setup, 22 nozzles, and 40 m tube |
Key Features
- Oil-free self-lubricating high pressure plunger pump head for misting operation without routine oil lubrication.
- 4-7 MPa working pressure, equal to about 580-1015 PSI, for high pressure misting layouts.
- 1.2 L/min flow rate for supported micro mist nozzle arrangements.
- Smart LCD controller with three startup modes and automatic cycle timing down to seconds.
- Self-priming eccentric pump-head structure with water shortage power-off protection.
- Pressure gauge, pressure relief valve, pressure regulator valve, filter unit, water inlet, water outlet, and 1.5 m inlet tubing.
- Fine mist output at approximately 5-10 microns for patio cooling and humidification use.
- Iron spray-coated housing, aerospace aluminum pump head, and all-copper motor.
Oil-Free Plunger Pump Head
The oil-free self-lubricating plunger pump head is a key selection point for buyers comparing commercial misting pumps. It is paired with a 220V all-copper motor, pressure regulation hardware, and a self-priming structure for high pressure water mist operation.
Typical Uses
- Outdoor patio cooling misting systems.
- Commercial outdoor cooling and water mist layouts.
- Greenhouse or work-area humidification where the 220V pump and nozzle layout match the site requirement.
- Dust reduction and fine water mist spraying setups.
Specifications
| Model | JDT-12A |
|---|---|
| Equipment type | Commercial high pressure misting pump / oil-free fog machine |
| Voltage | AC220V 50Hz |
| Power | 180 W |
| Working pressure | 4-7 MPa, about 580-1015 PSI |
| Flow rate | 1.2 L/min |
| Fine mist range | Approximately 5-10 microns |
| Motor speed | 1450 r/min |
| Control mode | Automatic control, liquid level time control, water shortage protection |
| Smart controller | LCD controller, three startup modes, cycle timing down to seconds |
| Control board | Maximum current 30A; reserved solenoid pressure-relief function |
| Pump head | Oil-free self-lubricating high pressure plunger pump head |
| Pump and motor | Aerospace aluminum pump head and all-copper motor |
| Housing | Iron shell with spray-coated finish |
| Self-priming function | Included |
| Inlet tubing shown | 1.5 m inlet tubing |
| Main unit size | 380 x 225 x 255 mm |
| Weight | 11.5 kg |
| Fitting diameter shown | 9.52 mm high pressure pipe fittings |
Nozzle Capacity and Kit Selection
The host can be matched with up to 25 No. 0 nozzles, 22 No. 1 nozzles, or 15 No. 2 nozzles. The complete set variant is listed with No. 1 micro mist, 22 nozzles, and 40 m tube for buyers who need a ready misting system kit.
Selection Notes
The JDT-12A high pressure misting pump package choice is clear: the main unit set is the host only, while the complete misting system set includes No. 1 micro mist, 22 nozzles, and 40 m tube.
- Confirm the required plug type and 220V power supply before ordering.
- Confirm whether the machine host only or the complete misting kit is required.
- Confirm tube length, nozzle count, installation layout, water supply, and liquid compatibility before custom use.
FAQ
What is the JDT-12A misting pump used for?
It is used for high pressure water mist layouts such as outdoor patio cooling, commercial outdoor cooling, humidification, spraying, and dust reduction systems.
What pressure does this misting pump provide?
The listed working pressure is 4-7 MPa, which is about 580-1015 PSI.
What voltage does the machine require?
The listed input is AC220V 50Hz. Confirm the plug type and power supply before ordering.
How many nozzles can the host support?
The host can be matched with up to 25 No. 0 nozzles, 22 No. 1 nozzles, or 15 No. 2 nozzles when the layout matches the host capacity.
What is included in the complete misting system set?
The complete set option is listed with No. 1 micro mist, 22 nozzles, and 40 m tube. The main unit set is the host-only configuration.
