FMF

BGD 526 Wet Abrasion Scrub Tester Paint Coating Washability Testing Machine

$2,287.93 USD

~~$0.00 USD~~ $2,287.93 USD

ลดราคา ขายหมดแล้ว

รวมภาษีแล้ว ค่าจัดส่งที่คำนวณในขั้นตอนการชำระเงิน

Product Overview

The BGD 526 is a wet abrasion scrub tester for paint coating washability and abrasion testing. It is used for reproducible scrub testing of coating samples and detergent performance evaluation where the listed test setup fits the buyer's standard.

Key Details

Model: BGD 526
Product type: wet abrasion scrub tester
Application: paint coating washability and abrasion testing
SKU: FMF-TM-21657
Stroke length: 300 mm
Frequency of travel: 5-95 times/min, adjustable
Brush specification: nylon brush bristles in 5/4 pattern extending 19 mm from block
Brush weight with holding device: 454±10 g, designed for ASTM D 2486
Scrub medium control: peristaltic pump design

Testing Notes

This product notes a four-digit counter that stops the machine after the set times are reached. It also notes quick loading and unloading of test samples and replacement of the abrasion head.

FAQ

What is the BGD 526 used for?

It is used as a wet abrasion scrub tester for paint coating washability and abrasion testing.

What stroke length is listed?

The listed stroke length is 300 mm.

What travel frequency is listed?

The listed frequency of travel is 5-95 times/min and adjustable.

What brush details are listed?

The product supports nylon brush bristles in a 5/4 pattern extending 19 mm from the block, with 454±10 g brush weight including the holding device for ASTM D 2486.