• 13 mm plastic-aluminum cap crimper selection
  • FMF manual vial cap crimper with stainless steel handles
  • FMF manual vial crimper demo for 13 mm and 20 mm aluminum and plastic-aluminum caps
  • Side view of FMF hand-operated vial cap crimper
  • Manual vial cap crimper with size-specific crimping head
  • Close-up of four-segment vial cap crimping head
  • Stainless steel manual vial cap crimper on wood surface
  • Full view of stainless steel manual vial cap crimper
  • Glass vials sealed with aluminum caps using a manual crimper
1 9

FMF

FMF Manual Vial Crimper & Handheld Bottle Capper for Pharmacy & Lab, 8-32 mm Aluminum & Plastic-Aluminum Caps, Hand Sealing Tool

$30.00 USD
$30.00 USD
セール 売り切れ
税込。 配送料はチェックアウト時に計算されます。
Cap Size & Type

Manual Vial Crimper and Handheld Bottle Capper

The FMF manual vial crimper is a handheld bottle capper and hand sealing tool for closing compatible aluminum or plastic-aluminum caps around glass vial mouths. It requires no electrical supply. Select the crimper by cap bottom diameter, cap construction and bottle-neck shape.

Pharmacy and Laboratory Applications

This handheld vial crimper is suitable for pharmacy and laboratory vial-capping work where the selected cap diameter, cap construction and bottle-neck shape match the crimping head.

Key Product Details

  • Available cap diameters: 8 mm, 11 mm, 13 mm, 15 mm, 20 mm, 26 mm, 28 mm, 30 mm and 32 mm.
  • Cap constructions: pure aluminum, plastic-aluminum and a dedicated 15 mm C-type selection.
  • Bottle-neck selections: standard neck plus 20A and 20B coarse-neck options.
  • Manual lever operation; no electrical supply is required.
  • Crimp tightness can be fine-adjusted at the crimping head.
  • Stainless steel tool body across the available models.

Variant and Cap Compatibility

PA means plastic-aluminum cap, AL means pure aluminum cap, C means 15 mm C-type cap, and CN means coarse-neck bottle.

Variant Cap Diameter Cap Construction Bottle Neck
8mm AL Cap 8 mm Pure aluminum Standard
8mm PA Cap 8 mm Plastic-aluminum Standard
11mm AL Cap 11 mm Pure aluminum Standard
11mm PA Cap 11 mm Plastic-aluminum Standard
13mm AL Cap 13 mm Pure aluminum Standard
13mm PA Cap 13 mm Plastic-aluminum Standard
15mm AL Cap 15 mm Pure aluminum Standard
15mm PA Cap 15 mm Plastic-aluminum Standard
15mm C Cap 15 mm C-type Standard
20mm AL Cap 20 mm Pure aluminum Standard
20mm PA Cap 20 mm Plastic-aluminum Standard
20A PA Cap CN 20 mm / 20A Plastic-aluminum Coarse neck
20B AL Cap CN 20 mm / 20B Pure aluminum Coarse neck
26mm AL Cap 26 mm Pure aluminum Standard
26mm PA Cap 26 mm Plastic-aluminum Standard
28mm AL Cap 28 mm Pure aluminum Standard
28mm PA Cap 28 mm Plastic-aluminum Standard
30mm AL Cap 30 mm Pure aluminum Standard
30mm PA Cap 30 mm Plastic-aluminum Standard
32mm AL Cap 32 mm Pure aluminum Standard
32mm PA Cap 32 mm Plastic-aluminum Standard
13 mm and 20 mm aluminum and plastic-aluminum vial cap diameter guide
Use the cap base diameter and cap construction to choose the matching 13 mm or 20 mm crimper.

How to Select the Correct Crimper

  1. Measure the bottom outside diameter of the cap.
  2. Identify whether the cap is pure aluminum, plastic-aluminum or 15 mm C-type.
  3. For a 20 mm cap, confirm whether the bottle has a standard or coarse neck.
  4. Select 20A for a coarse-neck plastic-aluminum cap or 20B for a coarse-neck pure aluminum cap.

Each crimping head is made for one cap size and construction. The heads are not interchangeable. For the corresponding 13 mm and 20 mm selections, a measured cap-diameter difference of approximately 0.5 mm is acceptable.

How to Use the Hand Crimper

  1. Place the inner stopper inside the outer cap and position the assembled cap on the glass bottle.
  2. Insert the capped bottle mouth into the crimping head.
  3. Squeeze the handles gently until the head closes around the cap.
  4. Release the handles and check that the cap is secure.
  5. If adjustment is needed, turn the crimping head clockwise to loosen or counterclockwise to tighten.

Package and Ordering Notes

Caps pictured for size reference are not included. Match the selected tool variant to the cap diameter, cap construction and bottle-neck shape before ordering.

Manual Vial Crimper FAQ

Does this vial crimper require electricity?

No. It is operated by squeezing the handles manually.

Can one crimping head handle every cap size?

No. Each head is size-specific and cap-construction-specific, and the heads are not interchangeable.

Which option fits a coarse-neck 20 mm bottle?

Choose 20A for a plastic-aluminum cap or 20B for a pure aluminum cap.

Are the caps included?

No. Caps shown in the images are for size reference and are not included.

詳細を表示する

You may also like