• Portable pneumatic nick grinder steel rule nicking tool main view
  • Pneumatic die nicker nick grinder operation demo for die board cutting rule groove cutting
  • Groove grinding machine for die board cutting rule nicking detail
  • Steel rule nicking tool locating device detail
  • Pneumatic nick grinder body detail for die board groove grinding
  • Cutting rule groove cutting tool for flat die cutting detail
  • Air nick grinder abrasive wheel for die board groove grinding
1 7

FMF

Portable Pneumatic Nick Grinder Steel Rule Nicking Tool Groove Grinding Machine for Flat Die Cutting Solid Corrugated Board

$89.21 USD
$0.00 USD $89.21 USD
Sale Sold out
Taxes included. Shipping calculated at checkout.

Product Details

This portable pneumatic nick grinder is used for making nick openings on die cutting rules during die-board preparation. It is suitable for flat die cutting work where controlled nick positions are needed on cutting rules for solid board and corrugated board applications.

The tool uses compressed air, a grinding wheel blade, a depth regulating valve, and a compact aluminum alloy body. Main parts include a stainless steel shield, transparent baffle, exhaust port, clear silencer tube, air inlet joint, and breather pipe.

Included Grinding Wheels

It comes with 10pcs grinding wheels in the following thicknesses:

  • 0.2 mm x 2 pcs
  • 0.5 mm x 3 pcs
  • 0.8 mm x 2 pcs
  • 1.0 mm x 1 pc
  • 1.2 mm x 1 pc
  • 1.5 mm x 1 pc

Specifications

Product type Portable pneumatic nick grinder / pneumatic die nicker
Operation mode Pneumatic air operation
Net machine weight 0.8 kg
Machine size 180 x 60 x 68 mm
Idling speed 35000 RPM
Inlet pipe diameter 8 x 5 mm
Working air pressure 0.6-0.8 MPa
Air pressure before use Above 0.6 MPa and stable
Air tube length 1.2 m + 6 m
Main use Nick opening and groove grinding for die-board cutting rules
SKU FMF-GM-68665

Use and Maintenance Notes

  • Use a stable air supply above 0.6 MPa before operation.
  • Check machine screws and confirm the spindle rotates normally before use.
  • Replace the grinding wheel according to the required nick width and adjust the depth regulating valve as needed.
  • Wear gloves, goggles, masks, and other protective equipment during operation.
  • Inject a few drops of air tool oil into the air inlet before use and again after finishing work.
  • After work, disconnect the air source, clean the machine body, and store it properly. Regular oiling helps prevent internal rust and motor sticking.

Grinding Wheel and Motor Service

The grinding wheel can be replaced by removing the nut and fixture with open-end wrenches, fitting the new grinding wheel, then reinstalling and tightening the fixture. The motor and air tube joint are also serviceable when maintenance is needed.

Instruction Manual

Download the pneumatic nick grinder instruction manual PDF

FAQ

What is this pneumatic nick grinder used for?

It is used to make nick openings and grind grooves on die-board cutting rules during flat die cutting preparation.

What air pressure does it need?

Working air pressure is 0.6-0.8 MPa. Use a stable air source above 0.6 MPa before operation.

What grinding wheels are included?

It comes with 10pcs grinding wheels: 0.2 mm x 2 pcs, 0.5 mm x 3 pcs, 0.8 mm x 2 pcs, 1.0 mm x 1 pc, 1.2 mm x 1 pc, and 1.5 mm x 1 pc.

How should it be maintained after use?

Disconnect the air source, add a few drops of air tool oil into the inlet, idle briefly, clean the body, and store it properly.

View full details

You may also like