1
/
von
1
FMF Supply
Dental Wet Model Shaping Trimmer with Abrasive Disc Wheel Lab Equipment New
Dental Wet Model Shaping Trimmer with Abrasive Disc Wheel Lab Equipment New
Normaler Preis
$378.87 USD
Normaler Preis
$0.00 USD
Verkaufspreis
$378.87 USD
Inkl. Steuern.
Versand wird beim Checkout berechnet
Anzahl
Verfügbarkeit für Abholungen konnte nicht geladen werden
Dental Wet Model Shaping Trimmer Abrasive Disc Wheel Lab Equipment New
Features:
1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve
2. Connect the waste-disposal tube to the unit
3. Connect the power cord, and switch on the power switch (O=off, l=on)
4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)
5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2 mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet)
Specification:
Voltage:220V/50Hz±10% 110V/60Hz±10%
Power:500W
Rotational:2800 rpm
Dimensions:44*35*35cm
Weight:20Kg
