FMF Supply
Dental Wet Model Shaping Trimmer with Abrasive Disc Wheel Lab Equipment New
Dental Wet Model Shaping Trimmer with Abrasive Disc Wheel Lab Equipment New
Precio habitual
$378.87 USD
Precio habitual
$0.00 USD
Precio de oferta
$378.87 USD
Impuestos incluidos.
Los gastos de envío se calculan en la pantalla de pago.
Cantidad
No se pudo cargar la disponibilidad de retiro
Dental Wet Model Shaping Trimmer Abrasive Disc Wheel Lab Equipment New
Features:
1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve
2. Connect the waste-disposal tube to the unit
3. Connect the power cord, and switch on the power switch (O=off, l=on)
4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18)
5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2 mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet)
Specification:
Voltage:220V/50Hz±10% 110V/60Hz±10%
Power:500W
Rotational:2800 rpm
Dimensions:44*35*35cm
Weight:20Kg
