{"title":"Web Tension \u0026 Guiding Control","description":"\u003cp\u003eWeb tension and guiding control systems for roll-to-roll packaging, printing, converting and laminating lines. Explore tension controllers, web guiders, sensors, actuators, magnetic brakes, clutches and servo control components for stable web handling and accurate alignment.\u003c\/p\u003e","products":[{"product_id":"ccd-sensor-for-epc-a12-web-guiding-system-epc-lpc-system-edge-line-position-controller","title":"เซ็นเซอร์ CCD สำหรับระบบนำทางวัสดุ EPC-A12 ติดตามขอบ\/เส้น","description":"\u003csection\u003e\n\u003ch2\u003eเซ็นเซอร์ CCD สำหรับระบบนำทางวัสดุ EPC-A12\u003c\/h2\u003e\n\u003cp\u003eเซ็นเซอร์ CCD\/HCCD นี้ใช้กับระบบนำทางวัสดุ EPC-A12 สำหรับติดตามตำแหน่งขอบและเส้น ออกแบบมาสำหรับงานที่เซ็นเซอร์ต้องระบุขอบของวัสดุที่เคลื่อนที่ ขอบคอนทราสต์ เส้น หรือลวดลายที่พิมพ์ ก่อนที่ระบบนำทางจะปรับตำแหน่งวัสดุ\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eรายละเอียดสินค้า\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eประเภทสินค้า: เซ็นเซอร์สำหรับระบบนำทางวัสดุและควบคุมตำแหน่งขอบ\/เส้น\u003c\/li\u003e\n\u003cli\u003eระบบอ้างอิง: ระบบนำทางวัสดุ EPC-A12 สำหรับควบคุมขอบ (EPC) และเส้น (LPC)\u003c\/li\u003e\n\u003cli\u003eคำอธิบายเซ็นเซอร์: กล้องสีเชิงเส้น HCCD \/ เซ็นเซอร์ CCD\u003c\/li\u003e\n\u003cli\u003eเป้าหมายการติดตาม: ขอบวัสดุ ขอบคอนทราสต์ เส้น และลวดลาย เมื่อปรับเทียบเป้าหมายแล้ว\u003c\/li\u003e\n\u003cli\u003eรหัส SKU: FMF-EPC-A12-76601\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eข้อควรทราบในการใช้งานและการเลือกซื้อ\u003c\/h2\u003e\n\u003cp\u003eวัสดุและเป้าหมายที่พิมพ์ต่างกันอาจต้องตั้งค่าเซ็นเซอร์แตกต่างกัน ก่อนสั่งซื้อ กรุณาเปรียบเทียบรูปภาพสินค้าและ SKU กับเซ็นเซอร์ที่ใช้ในระบบนำทางวัสดุ EPC-A12 หรือระบบ EPC\/LPC ของคุณ และยืนยันว่าเป้าหมายที่ต้องการติดตามสามารถปรับเทียบกับเซ็นเซอร์นี้ได้\u003c\/p\u003e\n\u003cp\u003eสินค้านี้คือเซ็นเซอร์ที่แสดงในหน้านี้เท่านั้น ควรตรวจสอบคอนโทรลเลอร์ แอคชูเอเตอร์ แรงดันไฟฟ้า สายเคเบิล และข้อกำหนดทั้งระบบกับเครื่องจักรหรือเอกสารโครงการของคุณก่อนซื้อ\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eคำถามที่พบบ่อย\u003c\/h2\u003e\n\u003ch3\u003eเซ็นเซอร์ CCD นี้ติดตามอะไร?\u003c\/h3\u003e\n\u003cp\u003eตามรายละเอียดสินค้า เซ็นเซอร์ติดตามขอบวัสดุ ขอบคอนทราสต์ เส้น และลวดลายหลังจากปรับเทียบเป้าหมายแล้ว\u003c\/p\u003e\n\u003ch3\u003eเซ็นเซอร์นี้ใช้กับระบบนำทางวัสดุ EPC และ LPC ได้หรือไม่?\u003c\/h3\u003e\n\u003cp\u003eได้ ชื่อสินค้าและรายละเอียดระบุว่าเซ็นเซอร์นี้ใช้กับระบบนำทางวัสดุ EPC-A12 และการควบคุมตำแหน่งขอบ\/เส้น EPC\/LPC\u003c\/p\u003e\n\u003ch3\u003eควรยืนยันอะไรก่อนสั่งซื้อ?\u003c\/h3\u003e\n\u003cp\u003eยืนยันระบบอ้างอิง EPC-A12 ลักษณะเซ็นเซอร์ในรูปภาพสินค้า SKU และความเหมาะสมของขอบวัสดุ เส้น หรือลวดลายสำหรับการปรับเทียบ\u003c\/p\u003e\n\u003ch3\u003eหน้านี้ยืนยันรายละเอียดคอนโทรลเลอร์ แอคชูเอเตอร์ แรงดันไฟฟ้า หรือใบรับรองหรือไม่?\u003c\/h3\u003e\n\u003cp\u003eไม่ รายละเอียดเหล่านั้นไม่ได้อยู่ในลิสติ้งเซ็นเซอร์นี้ ดังนั้นควรยืนยันจากเอกสารระบบของคุณก่อนซื้อ\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"ชื่อเริ่มต้น","offer_id":43370941808729,"sku":"FMF-EPC-A12-76601","price":576.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sf8382637a9aa4858b54a6ad302f57f495.webp?v=1780390742"},{"product_id":"pg350a-servo-web-guiding-system-epc-lpc-edge-line-position-controller-with-ultrasonic-sensor-all-in-one-automatic-web-guide","title":"PG350A ระบบนำทางเว็บเซอร์โวแบบครบวงจรพร้อมเซ็นเซอร์อัลตราโซนิก","description":"\u003csection\u003e\n\u003ch2\u003ePG350A ระบบนำทางเว็บเซอร์โวแบบครบวงจร\u003c\/h2\u003e\n\u003cp\u003ePG350A เป็นระบบนำทางเว็บเซอร์โวแบบครบวงจรสำหรับควบคุมตำแหน่งขอบและเส้น (EPC\/LPC) ของวัสดุเว็บแคบ ตัวควบคุม ไดรเวอร์ และเซ็นเซอร์ถูกรวมอยู่ในชุดนำทางเว็บขนาดกะทัดรัดชุดเดียว เพื่อลดความซับซ้อนในการติดตั้งและปรับแต่ง\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eฟังก์ชันหลัก\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eนำทางเว็บอัตโนมัติสำหรับแก้ไขตำแหน่งขอบและเส้น\u003c\/li\u003e\n\u003cli\u003eรวมตัวควบคุม ไดรเวอร์ และเซ็นเซอร์ไว้ในตัวเดียว เพื่อการติดตั้งและแก้ไขปัญหาที่รวดเร็วยิ่งขึ้น\u003c\/li\u003e\n\u003cli\u003eกำหนดค่าเซ็นเซอร์อัลตราโซนิกสำหรับตรวจจับตำแหน่งเว็บ\u003c\/li\u003e\n\u003cli\u003eขับเคลื่อนด้วยมอเตอร์เซอร์โว DC แบบไร้แปรงถ่าน ซึ่งระบุว่าไม่ต้องบำรุงรักษา\u003c\/li\u003e\n\u003cli\u003eกลไกสกรูบอลล์ความแม่นยำสูงเพื่อการวางตำแหน่งที่แม่นยำ\u003c\/li\u003e\n\u003cli\u003eระยะนำทางขนาดใหญ่สำหรับการจัดการวัสดุแบบม้วนต่อม้วน\u003c\/li\u003e\n\u003cli\u003eความยาวและความกว้างของลูกกลิ้งสามารถผลิตตามสั่งตามความต้องการของงาน\u003c\/li\u003e\n\u003cli\u003eอุปกรณ์เสริมสำหรับสถานีตัด: แบบแมนนวลหรือนิวเมติก\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eข้อมูลจำเพาะ\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eรุ่น\u003c\/th\u003e\n\u003ctd\u003ePG350A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eประเภทระบบ\u003c\/th\u003e\n\u003ctd\u003eระบบนำทางเว็บเซอร์โวแบบครบวงจร\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eโหมดควบคุม\u003c\/th\u003e\n\u003ctd\u003eควบคุมตำแหน่งขอบและเส้น EPC\/LPC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eกำลังไฟฟ้า\u003c\/th\u003e\n\u003ctd\u003eAC220V \/ 110V, 80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eเส้นผ่านศูนย์กลางลูกกลิ้ง\u003c\/th\u003e\n\u003ctd\u003e60 มม. \/ ผลิตตามสั่ง\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eความยาวลูกกลิ้ง\u003c\/th\u003e\n\u003ctd\u003e350 มม. \/ ผลิตตามสั่ง\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eความกว้างลูกกลิ้ง\u003c\/th\u003e\n\u003ctd\u003e260 มม. \/ ผลิตตามสั่ง\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eความเร็วสูงสุด\u003c\/th\u003e\n\u003ctd\u003e40 มม.\/วินาที\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eสภาพแวดล้อม\u003c\/th\u003e\n\u003ctd\u003e-10 ถึง 60°C, ความชื้นสัมพัทธ์ต่ำกว่า 90%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eFMF-PG350A-74905\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eหมายเหตุการเลือกซื้อ\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eใช้ผลิตภัณฑ์นี้เมื่อต้องการจับคู่กับระบบนำทางเว็บอัตโนมัติแบบครบวงจร PG350A สำหรับการนำทางเว็บแคบ\u003c\/li\u003e\n\u003cli\u003eยืนยันความยาวลูกกลิ้ง ความกว้างลูกกลิ้ง เส้นทางเดินเว็บ แรงดันไฟฟ้า และพื้นที่ติดตั้งที่ต้องการก่อนสั่งซื้อ\u003c\/li\u003e\n\u003cli\u003eหากงานของคุณต้องการช่วงความกว้างเว็บ มุมนำทาง แรงดึงสูงสุด ชุดสายเคเบิล หรือรูปแบบอุปกรณ์ยึดเฉพาะ โปรดยืนยันรายละเอียดเหล่านั้นก่อนซื้อ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eคำถามที่พบบ่อย\u003c\/h2\u003e\n\u003ch3\u003ePG350A ใช้ทำอะไร?\u003c\/h3\u003e\n\u003cp\u003eใช้สำหรับนำทางวัสดุเว็บแคบโดยการแก้ไขตำแหน่งขอบหรือเส้นในระหว่างกระบวนการจัดการและแปรรูปแบบม้วนต่อม้วน\u003c\/p\u003e\n\u003ch3\u003eมีอะไรถูกรวมอยู่ในระบบบ้าง?\u003c\/h3\u003e\n\u003cp\u003eผลิตภัณฑ์นี้ได้รับการออกแบบให้มีตัวควบคุม ไดรเวอร์ และเซ็นเซอร์ในตัว พร้อมมอเตอร์เซอร์โว DC แบบไร้แปรงถ่านและกลไกสกรูบอลล์ความแม่นยำสูง\u003c\/p\u003e\n\u003ch3\u003eผลิตภัณฑ์นี้รวมเซ็นเซอร์อัลตราโซนิกหรือไม่?\u003c\/h3\u003e\n\u003cp\u003eใช่ ชื่อผลิตภัณฑ์ระบุว่าระบบนำทางเว็บ PG350A นี้มาพร้อมเซ็นเซอร์อัลตราโซนิก\u003c\/p\u003e\n\u003ch3\u003eฉันควรยืนยันอะไรก่อนสั่งซื้อ?\u003c\/h3\u003e\n\u003cp\u003eยืนยันแรงดันไฟฟ้า ขนาดลูกกลิ้ง เส้นทางเดินเว็บ พื้นที่ติดตั้ง และข้อกำหนดเกี่ยวกับลูกกลิ้งหรืออุปกรณ์ยึดสถานีตัดที่ผลิตตามสั่ง\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"ชื่อเริ่มต้น","offer_id":43370941907033,"sku":"FMF-PG350A-74905","price":1031.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S7463c6450336416aa1f0ab968c990b03e.webp?v=1780390744"},{"product_id":"pg450a-all-in-one-servo-web-guiding-system-epc-lpc-edge-line-position-controller-with-ultrasonic-sensor","title":"PG450A All-in-One Servo Web Guide with Ultrasonic Sensor","description":"\u003csection\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe PG450A is an all-in-one servo web guiding system for EPC\/LPC edge and line position control on narrow web materials. It integrates the controller, driver, detector, and servo guide structure in a compact unit, with an ultrasonic sensor configuration for web edge detection.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eKey Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: PG-450A \/ PG450A\u003c\/li\u003e\n\u003cli\u003eApplication: narrow web guiding for label printing, packaging, and non-woven material processes\u003c\/li\u003e\n\u003cli\u003eIntegrated controller, driver, detector, and guide structure for easier installation and debugging\u003c\/li\u003e\n\u003cli\u003eBrushless DC servo motor drive for low-maintenance operation\u003c\/li\u003e\n\u003cli\u003ePrecision ball screw mechanism for accurate positioning\u003c\/li\u003e\n\u003cli\u003eAvailable in two installation-direction options; select the direction that matches the sensor side and material feed direction shown in the product images\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePG-450A \/ PG450A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower input\u003c\/td\u003e\n\u003ctd\u003eAC220V \/ 80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive\u003c\/td\u003e\n\u003ctd\u003eBrushless DC servo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller length\u003c\/td\u003e\n\u003ctd\u003e450 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller diameter\u003c\/td\u003e\n\u003ctd\u003e60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller width\u003c\/td\u003e\n\u003ctd\u003e310 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase length\u003c\/td\u003e\n\u003ctd\u003e460 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeb guide range\u003c\/td\u003e\n\u003ctd\u003e+\/-17 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. tension\u003c\/td\u003e\n\u003ctd\u003e500 N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. driving speed\u003c\/td\u003e\n\u003ctd\u003e40 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironment\u003c\/td\u003e\n\u003ctd\u003e-10 to 60 degree C, below RH 90%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eInstallation Direction Options\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOption 1\u003c\/td\u003e\n\u003ctd\u003eLeft-side sensor installation \/ right-to-left material feed as shown in the product image\u003c\/td\u003e\n\u003ctd\u003eFMF-PG450A-73209-OPTION-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOption 2\u003c\/td\u003e\n\u003ctd\u003eAlternate installation direction shown in the product images\u003c\/td\u003e\n\u003ctd\u003eFMF-PG450A-73209-OPTION-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSelection Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse PG450A when the 450 mm roller length, 310 mm roller width, and 500 N maximum tension match the web material and machine layout.\u003c\/li\u003e\n\u003cli\u003eConfirm whether your line needs EPC edge control, LPC line control, or both before ordering.\u003c\/li\u003e\n\u003cli\u003eConfirm installation side, material feed direction, voltage, web width, roller surface, and available mounting space before selecting Option 1 or Option 2.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between Option 1 and Option 2?\u003c\/h3\u003e\n\u003cp\u003eThey are installation-direction choices. Match the option to the sensor side and material feed direction shown in the product images before ordering.\u003c\/p\u003e\n\u003ch3\u003eWhat materials is this system intended for?\u003c\/h3\u003e\n\u003cp\u003eIt is intended for narrow web material guiding, including label printing, packaging, and non-woven material applications when the machine requirements match the listed specifications.\u003c\/p\u003e\n\u003ch3\u003eCan roller dimensions be customized?\u003c\/h3\u003e\n\u003cp\u003eThe PG series supports custom roller length, width, and surface treatment. Confirm the required dimensions and roller surface before ordering.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Option 1","offer_id":43370942005337,"sku":"FMF-PG450A-73209-OPTION-1","price":1075.73,"currency_code":"USD","in_stock":true},{"title":"Option 2","offer_id":43370942038105,"sku":"FMF-PG450A-73209-OPTION-2","price":1075.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sa940b38334bc4c8588b60bfa7537df81V.webp?v=1780390749"},{"product_id":"pg400a-servo-web-guiding-system-400mm-roller-epc-lpc-edge-position-controller-with-ultrasonic-sensor-for-web-control","title":"PG400A Servo Web Guiding System 400mm Roller with Ultrasonic Sensor","description":"\u003csection\u003e\n\u003ch2\u003ePG400A Servo Web Guiding System with 400mm Roller\u003c\/h2\u003e\n\u003cp\u003eThe PG400A is an all-in-one servo web guiding system for EPC\/LPC edge and line position control. It is listed with a 400mm roller and ultrasonic sensor for web control applications where narrow web materials need automatic guiding and correction.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eMain Functions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll-in-one web guide controller for accurate guiding of narrow web materials.\u003c\/li\u003e\n\u003cli\u003eIntegrated controller, driver, and detector to simplify installation and debugging.\u003c\/li\u003e\n\u003cli\u003eUltrasonic sensor configuration for web position detection.\u003c\/li\u003e\n\u003cli\u003eBrushless DC servo motor drive, listed as maintenance-free.\u003c\/li\u003e\n\u003cli\u003ePrecision ball screw mechanism for accurate positioning.\u003c\/li\u003e\n\u003cli\u003eLarge guiding travel for web control applications.\u003c\/li\u003e\n\u003cli\u003eRoller length and width can be custom-made based on application requirements.\u003c\/li\u003e\n\u003cli\u003eOptional cutting-station fixture: manual or pneumatic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eInstallation Direction Options\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eOption\u003c\/th\u003e\n\u003cth scope=\"col\"\u003edirection note\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSKU\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOption 1\u003c\/td\u003e\n\u003ctd\u003eLeft-side sensor installation; material feeding direction shown as right to left\u003c\/td\u003e\n\u003ctd\u003eFMF-PG400A-30809-OPTION-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOption 2\u003c\/td\u003e\n\u003ctd\u003eMaterial feeding direction shown as left to right\u003c\/td\u003e\n\u003ctd\u003eFMF-PG400A-30809-OPTION-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eDetails\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003ePG400A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSystem type\u003c\/th\u003e\n\u003ctd\u003eAll-in-one servo web guiding system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl mode\u003c\/th\u003e\n\u003ctd\u003eEPC\/LPC edge and line position control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSensor wording\u003c\/th\u003e\n\u003ctd\u003eUltrasonic sensor for web control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRoller\u003c\/th\u003e\n\u003ctd\u003e400mm roller listed in product title\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVariant SKUs\u003c\/th\u003e\n\u003ctd\u003eFMF-PG400A-30809-OPTION-1 \/ FMF-PG400A-30809-OPTION-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSelection Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSelect the installation direction that matches the sensor side and material feeding direction shown in your machine layout.\u003c\/li\u003e\n\u003cli\u003eConfirm the roller size, web path, mounting space, fixture style, and any custom roller requirements before ordering.\u003c\/li\u003e\n\u003cli\u003eIf your application requires a specific voltage, web width range, guide angle, maximum tension, cable set, or sensor accuracy, confirm those details before purchase because they are not in the current listing data.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is the PG400A used for?\u003c\/h3\u003e\n\u003cp\u003eIt is used for automatic web guiding, helping correct edge or line position in web control applications.\u003c\/p\u003e\n\u003ch3\u003eWhat is integrated in the PG400A system?\u003c\/h3\u003e\n\u003cp\u003eThis product is designed an integrated controller, driver, and detector with brushless DC servo motor driving and a precision ball screw mechanism.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between Option 1 and Option 2?\u003c\/h3\u003e\n\u003cp\u003eThe options relate to installation and material feeding direction. Option 1 is designed for left-side sensor installation with material feeding shown as right to left; Option 2 is listed with material feeding shown as left to right.\u003c\/p\u003e\n\u003ch3\u003eWhat should I confirm before ordering?\u003c\/h3\u003e\n\u003cp\u003eConfirm installation direction, roller size, web path, mounting space, and any required custom roller or fixture details.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Option 1","offer_id":43370945019993,"sku":"FMF-PG400A-30809-OPTION-1","price":1053.62,"currency_code":"USD","in_stock":true},{"title":"Option 2","offer_id":43370945052761,"sku":"FMF-PG400A-30809-OPTION-2","price":1053.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sd41ad234720f44d782dc3882fdd9ba05b.webp?v=1780390797"},{"product_id":"kt5w-2n1116-contrast-sensors-color-mark-sensor","title":"KT5W-2N1116 เซ็นเซอร์ตรวจจับความแตกต่างของสีพร้อมสายเคเบิล","description":"\u003csection\u003e\n\u003ch2\u003eKT5W-2N1116 เซ็นเซอร์ตรวจจับความแตกต่างของสี\u003c\/h2\u003e\n\u003cp\u003eเซ็นเซอร์ KT5W-2N1116 เป็นเซ็นเซอร์ตรวจจับความแตกต่างของสีที่ใช้ในการตรวจจับเครื่องหมายพิมพ์ เครื่องหมายลงทะเบียน และการเปลี่ยนแปลงความแตกต่างในงานอุตสาหกรรมอัตโนมัติและเครื่องจักรบรรจุภัณฑ์ สินค้านี้ประกอบด้วยเซ็นเซอร์ KT5W-2N1116 จำนวน 1 ชิ้น และสายเคเบิลจำนวน 1 เส้น\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eรายละเอียดสำคัญ\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eรุ่น: KT5W-2N1116\u003c\/li\u003e\n\u003cli\u003eประเภทสินค้า: เซ็นเซอร์ตรวจจับความแตกต่าง \/ เซ็นเซอร์ตรวจจับสี\u003c\/li\u003e\n\u003cli\u003eSKU: FMF-KT5W-2N1116-87865\u003c\/li\u003e\n\u003cli\u003eสิ่งที่รวมในชุด: เซ็นเซอร์ KT5W-2N1116 จำนวน 1 ชิ้น + สายเคเบิลจำนวน 1 เส้น\u003c\/li\u003e\n\u003cli\u003eการใช้งาน: การตรวจจับเครื่องหมาย การตรวจจับความแตกต่าง และการใช้งานเซ็นเซอร์ลงทะเบียนที่เครื่องจักรต้องแยกแยะเครื่องหมายออกจากพื้นหลัง\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eข้อมูลจำเพาะทางเทคนิค\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"text-align: left;\"\u003eรายการ\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eข้อมูลจำเพาะ\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eแหล่งกำเนิดแสง\u003c\/td\u003e\n\u003ctd\u003eRGB LED\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eความยาวคลื่น\u003c\/td\u003e\n\u003ctd\u003e470 นาโนเมตร 525 นาโนเมตร และ 640 นาโนเมตร\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eระยะตรวจจับ\u003c\/td\u003e\n\u003ctd\u003eสูงสุด 10 มิลลิเมตรจากขอบหน้าของเลนส์\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eขนาดจุดแสง\u003c\/td\u003e\n\u003ctd\u003e1.2 มิลลิเมตร x 4.2 มิลลิเมตร\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eการปรับแต่ง\u003c\/td\u003e\n\u003ctd\u003eปุ่ม Teach-in; การสอนแบบคงที่ 2-point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eแรงดันไฟฟ้าจ่าย\u003c\/td\u003e\n\u003ctd\u003e10 V DC ถึง 30 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eเอาต์พุตสวิตชิ่ง\u003c\/td\u003e\n\u003ctd\u003eNPN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eความถี่สวิตชิ่ง \/ เวลาตอบสนอง\u003c\/td\u003e\n\u003ctd\u003e10 kHz \/ 50 ไมโครวินาที\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eการเชื่อมต่อ\u003c\/td\u003e\n\u003ctd\u003eM12 ขั้วต่อแบบ 5-pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eตัวเรือน \/ การป้องกัน\u003c\/td\u003e\n\u003ctd\u003eตัวเรือนหล่อสังกะสี ระดับการป้องกัน IP67\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eอุณหภูมิใช้งาน\u003c\/td\u003e\n\u003ctd\u003e-10°C ถึง +55°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eน้ำหนัก\u003c\/td\u003e\n\u003ctd\u003eประมาณ 400 กรัม\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eหมายเหตุการเลือกซื้อ\u003c\/h2\u003e\n\u003cp\u003eโปรดยืนยันรุ่น KT5W-2N1116 ที่แน่นอน ข้อกำหนดเอาต์พุต NPN การเดินสาย M12 5-pin ระยะตรวจจับ และอินพุตของเครื่องจักรก่อนสั่งซื้อ หากความยาวสายเคเบิลหรือทิศทางของขั้วต่อมีความสำคัญ โปรดเปรียบเทียบสายเคเบิลที่ให้มาในรูปภาพสินค้ากับข้อกำหนดการเดินสายของเครื่องจักรของคุณ\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eคำถามที่พบบ่อย\u003c\/h2\u003e\n\u003ch3\u003eเซ็นเซอร์นี้ใช้ทำอะไร?\u003c\/h3\u003e\n\u003cp\u003eใช้สำหรับตรวจจับความแตกต่างและเครื่องหมายสี เช่น การตรวจจับเครื่องหมายพิมพ์หรือเครื่องหมายลงทะเบียนเทียบกับพื้นหลัง\u003c\/p\u003e\n\u003ch3\u003eต้องใช้แหล่งจ่ายไฟแบบใด?\u003c\/h3\u003e\n\u003cp\u003eข้อมูลจำเพาะของเซ็นเซอร์ระบุช่วงแรงดันไฟฟ้าจ่าย 10 V DC ถึง 30 V DC\u003c\/p\u003e\n\u003ch3\u003eรุ่นนี้ใช้เอาต์พุตประเภทใด?\u003c\/h3\u003e\n\u003cp\u003eรุ่น KT5W-2N1116 นี้เป็นรุ่นเอาต์พุตสวิตชิ่งแบบ NPN\u003c\/p\u003e\n\u003ch3\u003eมีอะไรอยู่ในชุด?\u003c\/h3\u003e\n\u003cp\u003eชุดประกอบด้วยเซ็นเซอร์ตรวจจับความแตกต่างของสี KT5W-2N1116 จำนวน 1 ชิ้น และสายเคเบิลจำนวน 1 เส้น\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"ชื่อเริ่มต้น","offer_id":43370945970265,"sku":"FMF-KT5W-2N1116-87865","price":125.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S97d8f7bd87364402aaa4aed5f36e5e658.webp?v=1780390808"},{"product_id":"dc24v-magnetic-powder-clutch-hollow-shaft-6nm-12nm-25nm-for-tension-control-winding-printing-packaging-textile-machine","title":"DC24V Hollow Shaft Magnetic Powder Clutch 6Nm 12Nm 25Nm","description":"\u003csection\u003e\n\u003ch2\u003eDC24V Hollow Shaft Magnetic Powder Clutch\u003c\/h2\u003e\n\u003cp\u003eThis hollow shaft magnetic powder clutch is used for torque and tension control in winding, printing, packaging, and textile machinery. Package includes DC24V FL-K series options with 6Nm, 12Nm, and 25Nm torque ratings.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: hollow shaft magnetic powder clutch.\u003c\/li\u003e\n\u003cli\u003eVoltage: DC24V.\u003c\/li\u003e\n\u003cli\u003eAvailable torque options: 6Nm, 12Nm, and 25Nm.\u003c\/li\u003e\n\u003cli\u003eOption series shown on This product: FL-K-06, FL-K-12, and FL-K-25.\u003c\/li\u003e\n\u003cli\u003eCommon use: tension control for winding, printing, packaging, and textile machine applications.\u003c\/li\u003e\n\u003cli\u003eHollow shaft design supports compact integration into mechanical assemblies.\u003c\/li\u003e\n\u003cli\u003eUse a DC24V power source only. Using an AC power source can damage the clutch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eAvailable Options\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"text-align: left;\"\u003eOption\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eTorque\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eSKU\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFL-K-06\u003c\/td\u003e\n\u003ctd\u003e6Nm\u003c\/td\u003e\n\u003ctd\u003eFMF-DC24V-09305-FL-K-06-6NM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFL-K-12\u003c\/td\u003e\n\u003ctd\u003e12Nm\u003c\/td\u003e\n\u003ctd\u003eFMF-DC24V-09305-FL-K-12-12NM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFL-K-25\u003c\/td\u003e\n\u003ctd\u003e25Nm\u003c\/td\u003e\n\u003ctd\u003eFMF-DC24V-09305-FL-K-25-25NM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSelection Notes\u003c\/h2\u003e\n\u003cp\u003eSelect the torque option that matches your machine design and tension-control requirement. Compare the option name, SKU, product photos, shaft style, and DC24V power requirement with your current machine before ordering.\u003c\/p\u003e\n\u003cp\u003eIf your project requires another magnetic powder clutch or magnetic powder brake model, use the product photos and model details on the target listing to confirm the correct replacement part.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is this magnetic powder clutch used for?\u003c\/h3\u003e\n\u003cp\u003eIt is used for torque and tension control in equipment such as winding, printing, packaging, and textile machines.\u003c\/p\u003e\n\u003ch3\u003eWhich torque options are available?\u003c\/h3\u003e\n\u003cp\u003eThis product offers 6Nm, 12Nm, and 25Nm options: FL-K-06, FL-K-12, and FL-K-25.\u003c\/p\u003e\n\u003ch3\u003eWhat power source should I use?\u003c\/h3\u003e\n\u003cp\u003eUse DC24V only. The product notes warn that using an AC power source can damage the clutch.\u003c\/p\u003e\n\u003ch3\u003eHow should I choose the right option?\u003c\/h3\u003e\n\u003cp\u003eMatch the torque rating, FL-K option, SKU, shaft style, and product images with the requirements of your tension-control system.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"FL K 06 6Nm","offer_id":43370949771353,"sku":"FMF-DC24V-09305-FL-K-06-6NM","price":51.58,"currency_code":"USD","in_stock":true},{"title":"FL K 12 12Nm","offer_id":43370949804121,"sku":"FMF-DC24V-09305-FL-K-12-12NM","price":103.15,"currency_code":"USD","in_stock":true},{"title":"FL K 25 25Nm","offer_id":43370949836889,"sku":"FMF-DC24V-09305-FL-K-25-25NM","price":149.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S044d9928f97f4e769426cd110dfa866ci.webp?v=1780390860"},{"product_id":"epc-a12-edge-line-position-controller","title":"EPC-A12 ตัวควบคุมตำแหน่งขอบ\/เส้นสำหรับการนำทางแผ่นวัสดุ","description":"\u003csection\u003e\n\u003ch2\u003eตัวควบคุมนี้คืออะไร\u003c\/h2\u003e\n\u003cp\u003eEPC-A12 เป็นตัวควบคุมตำแหน่งขอบ\/เส้นสำหรับระบบนำทางและปรับแก้แผ่นวัสดุในอุตสาหกรรม ใช้เป็นหน่วยควบคุมในระบบที่ต้องการการควบคุมแก้ไขขอบ เส้น กึ่งกลาง หรือแบบคดเคี้ยว รวมถึงโหมด EPC, LPC, CPC และ SPC ที่อ้างถึงสำหรับผลิตภัณฑ์นี้\u003c\/p\u003e\n\u003cp\u003eผลิตภัณฑ์นี้เป็นเฉพาะตัวควบคุมเท่านั้น ไม่รวมเซ็นเซอร์\/ตัวตรวจจับ และแอคชูเอเตอร์\/เซอร์โวมอเตอร์\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eรายละเอียดผลิตภัณฑ์\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eรุ่น\u003c\/th\u003e\n\u003ctd\u003eEPC-A12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eประเภทผลิตภัณฑ์\u003c\/th\u003e\n\u003ctd\u003eตัวควบคุมตำแหน่งขอบ\/เส้น\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eFMF-EPC-A12-33593\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eป้ายกำลังไฟ\u003c\/th\u003e\n\u003ctd\u003eDC24V; ตารางป้ายด้านหลังแสดง 24VDC \/ 6A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eป้ายขั้วต่อด้านหลัง\u003c\/th\u003e\n\u003ctd\u003ePower 4P, Servo Motor 8P, Detector 5P, Expansion Port 6P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eป้ายขั้วต่อเทอร์มินัล\u003c\/th\u003e\n\u003ctd\u003eMC Port, RS485, 0-10V, OUT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eปุ่มควบคุมด้านหน้าที่แสดง\u003c\/th\u003e\n\u003ctd\u003eAuto, Man, Detect, Cent, Set, Left, Right, ESC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eเมื่อใดที่รุ่นนี้เหมาะสม\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eใช้เมื่อคุณต้องการตัวควบคุม EPC-A12 สำหรับระบบปรับแก้ตำแหน่งขอบหรือเส้น\u003c\/li\u003e\n\u003cli\u003eใช้เมื่อระบบของคุณสร้างขึ้นจากเซ็นเซอร์\/ตัวตรวจจับและเซอร์โวมอเตอร์หรือแอคชูเอเตอร์ที่แยกต่างหากซึ่งเชื่อมต่อกับพอร์ตของตัวควบคุม\u003c\/li\u003e\n\u003cli\u003eยืนยันความต้องการกำลังไฟ 24VDC, การเดินสาย, ตัวตรวจจับ, เซอร์โวมอเตอร์หรือแอคชูเอเตอร์ และพื้นที่แผงหน้าปัดก่อนสั่งซื้อ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eหมายเหตุสำคัญในการสั่งซื้อ\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eหน้านี้ไม่ได้ระบุเซ็นเซอร์, แอคชูเอเตอร์, เซอร์โวมอเตอร์, ชุดติดตั้ง, ชุดสายเคเบิล หรือแหล่งจ่ายไฟภายนอกเป็นอุปกรณ์เสริมที่รวมอยู่\u003c\/li\u003e\n\u003cli\u003eอย่าเลือกรายการนี้เป็นชุดนำทางแผ่นวัสดุที่สมบูรณ์ เว้นแต่คุณมีส่วนประกอบภายนอกที่เข้ากันได้อยู่แล้ว หรือวางแผนที่จะจัดหาแยกต่างหาก\u003c\/li\u003e\n\u003cli\u003eหากคุณกำลังเปลี่ยนตัวควบคุมที่มีอยู่ ให้เปรียบเทียบชื่อรุ่น EPC-A12, ป้ายพอร์ตด้านหลัง, ความต้องการกำลังไฟ และรูปแบบแผงด้านหน้ากับเครื่องปัจจุบันของคุณ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eคำถามที่พบบ่อย\u003c\/h2\u003e\n\u003ch3\u003eนี่คือระบบนำทางแผ่นวัสดุ EPC-A12 ที่สมบูรณ์หรือไม่?\u003c\/h3\u003e\n\u003cp\u003eไม่ ผลิตภัณฑ์นี้เป็นเฉพาะตัวควบคุมตำแหน่งขอบ\/เส้น EPC-A12 เท่านั้น ไม่รวมเซ็นเซอร์\/ตัวตรวจจับและแอคชูเอเตอร์\/เซอร์โวมอเตอร์\u003c\/p\u003e\n\u003ch3\u003eควรยืนยันกำลังไฟใดก่อนซื้อ?\u003c\/h3\u003e\n\u003cp\u003eป้ายผลิตภัณฑ์ด้านหลังแสดง DC24V และตารางพอร์ตแสดง 24VDC \/ 6A ยืนยันแหล่งจ่ายไฟและการเดินสายของเครื่องก่อนสั่งซื้อ\u003c\/p\u003e\n\u003ch3\u003eพอร์ตด้านหลังใดที่มองเห็นได้บนตัวควบคุม?\u003c\/h3\u003e\n\u003cp\u003eแผงด้านหลังแสดงขั้วต่อ Power, Servo Motor, Detector และ EX Port รวมถึงบล็อกเทอร์มินัลที่มีป้าย MC Port, RS485, 0-10V และ OUT\u003c\/p\u003e\n\u003ch3\u003eโหมดการแก้ไขใดที่ออกแบบมาสำหรับตัวควบคุมนี้?\u003c\/h3\u003e\n\u003cp\u003eผลิตภัณฑ์นี้อ้างถึงโหมดการแก้ไข EPC, LPC, CPC และ SPC จับคู่ตัวควบคุมกับตัวตรวจจับภายนอกและแอคชูเอเตอร์ที่ถูกต้องสำหรับเครื่องของคุณ\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"ชื่อเริ่มต้น","offer_id":43370950983769,"sku":"FMF-EPC-A12-33593","price":260.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S102a65c5a04d47409a59b4a9d171f659S.webp?v=1780390869"},{"product_id":"ktc800a-tension-controller-24v-magnetic-powder-brake-clutch-controller-for-web-tension-control-system","title":"KTC800A ตัวควบคุมแรงตึงสำหรับเบรกผงแม่เหล็กและคลัตช์ผงแม่เหล็ก","description":"\u003csection\u003e\n\u003ch2\u003eภาพรวมผลิตภัณฑ์\u003c\/h2\u003e\n\u003cp\u003eตัวควบคุมแรงตึงรุ่น KTC800A เป็นอุปกรณ์ควบคุมแบบแมนนวลสำหรับระบบแรงตึงของวัสดุแบบม้วนที่ใช้เบรกผงแม่เหล็กหรือคลัตช์ผงแม่เหล็ก โดยจ่ายไฟ DC 0-24V สูงสุด 4A และใช้การปรับความกว้างพัลส์ (PWM) เพื่อควบคุมเบรกหรือคลัตช์อย่างมีประสิทธิภาพ\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eรายละเอียดสำคัญ\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eรุ่น: KTC800A\u003c\/li\u003e\n\u003cli\u003eการใช้งาน: ควบคุมแรงตึงของวัสดุแบบม้วนร่วมกับอุปกรณ์เบรกผงแม่เหล็กหรือคลัตช์ผงแม่เหล็ก\u003c\/li\u003e\n\u003cli\u003eกำลังไฟฟ้าเข้า: AC 185-264V\u003c\/li\u003e\n\u003cli\u003eเอาต์พุต: DC 0-24V สูงสุด 4A\u003c\/li\u003e\n\u003cli\u003eวิธีการควบคุม: การปรับความกว้างพัลส์ (PWM)\u003c\/li\u003e\n\u003cli\u003eโหมดควบคุม: กระแสคงที่ แรงดันคงที่ กำลังคงที่ หรือโพเทนชิโอมิเตอร์ภายนอก\u003c\/li\u003e\n\u003cli\u003eรหัส SKU: FMF-KTC800A-99129\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eข้อมูลจำเพาะทางเทคนิค\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eรายการ\u003c\/th\u003e\n\u003cth\u003eข้อมูลจำเพาะ\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eรุ่น\u003c\/td\u003e\n\u003ctd\u003eKTC800A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eกำลังไฟฟ้าเข้า\u003c\/td\u003e\n\u003ctd\u003eAC 185-264V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eแรงดัน\/กระแสเอาต์พุต\u003c\/td\u003e\n\u003ctd\u003eDC 0-24V \/ 4A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eช่วงตั้งค่ากระแส\u003c\/td\u003e\n\u003ctd\u003e0.00-4.00A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eขั้นตอนการปรับกระแส\u003c\/td\u003e\n\u003ctd\u003e0.01A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eการควบคุมเอาต์พุต\u003c\/td\u003e\n\u003ctd\u003ePWM การปรับความกว้างพัลส์\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eโหมดการทำงาน\u003c\/td\u003e\n\u003ctd\u003eกระแสคงที่ แรงดันคงที่ กำลังคงที่ โพเทนชิโอมิเตอร์ภายนอก\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eหมายเหตุเกี่ยวกับโหมด\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eในโหมดกระแสคงที่ ไฟแสดงสถานะกระแสคงที่บนแผงจะติด และปุ่มปรับจะใช้ปรับค่ากระแสที่ตั้งไว้\u003c\/li\u003e\n\u003cli\u003eหากคลัตช์หรือเบรกที่เชื่อมต่อมีพิกัดกำลังต่ำกว่า กระแสจริงอาจต่ำกว่าค่าที่ตั้งบนตัวควบคุม\u003c\/li\u003e\n\u003cli\u003eตัวอย่างเช่น คลัตช์ผงแม่เหล็ก 12Nm ที่ระบุ 24V\/1.2A ควรตั้งค่าตามกระแสพิกัดของคลัตช์นั้น แทนที่จะใช้เอาต์พุตสูงสุด\u003c\/li\u003e\n\u003cli\u003eก่อนใช้โหมดกำลังคงที่ ต้องปรับเทียบคลัตช์หรือเบรกที่เชื่อมต่อก่อน\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eหมายเหตุการเลือกซื้อ\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eยืนยันว่าเบรกผงแม่เหล็กหรือคลัตช์ต้องใช้ไฟ DC 24V และอยู่ในช่วงเอาต์พุต 4A\u003c\/li\u003e\n\u003cli\u003eตรวจสอบวิธีการเดินสายไฟของเครื่อง โหมดควบคุมที่ต้องการ และพื้นที่ติดตั้งก่อนสั่งซื้อ\u003c\/li\u003e\n\u003cli\u003eใช้โพเทนชิโอมิเตอร์ภายนอกเฉพาะเมื่อรูปแบบการควบคุมเครื่องของคุณต้องการการปรับแบบแมนนวลระยะไกล\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eคำถามที่พบบ่อย\u003c\/h2\u003e\n\u003ch3\u003eKTC800A ควบคุมอะไร?\u003c\/h3\u003e\n\u003cp\u003eตัวควบคุมนี้ปรับเอาต์พุตไปยังเบรกผงแม่เหล็กหรือคลัตช์ผงแม่เหล็ก เพื่อให้เครื่องสามารถควบคุมแรงตึงของวัสดุแบบม้วนระหว่างกระบวนการคลายม้วน ม้วนเก็บ หรือกระบวนการจัดการวัสดุที่เกี่ยวข้อง\u003c\/p\u003e\n\u003ch3\u003eควรยืนยันอะไรก่อนสั่งซื้อ?\u003c\/h3\u003e\n\u003cp\u003eยืนยันพิกัดแรงดันและกระแสของเบรกหรือคลัตช์ วิธีการเดินสายไฟ โหมดควบคุม และว่าอุปกรณ์ต้องการการปรับแบบกระแสคงที่ แรงดันคงที่ กำลังคงที่ หรือโพเทนชิโอมิเตอร์ภายนอก\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"ชื่อเริ่มต้น","offer_id":43370951049305,"sku":"FMF-KTC800A-99129","price":40.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S0270ccaf20c042518d990f08a56b6b48q.webp?v=1780390871"},{"product_id":"epc-a18-servo-web-guiding-system-ultrasonic-sensor-150mm","title":"ระบบนำทางเว็บเซอร์โว EPC-A18 พร้อมเซ็นเซอร์อัลตราโซนิก ระยะชัก 150mm","description":"\u003ch2\u003eระบบนำทางเว็บเซอร์โว EPC-A18 สำหรับการแก้ไขขอบ\u003c\/h2\u003e\n\u003cp\u003eEPC-A18 เป็นระบบนำทางเว็บเซอร์โวสำหรับการนำทางขอบ (EPC) และงานแก้ไขตำแหน่งเว็บที่เกี่ยวข้อง รายการนี้มาพร้อมเซ็นเซอร์อัลตราโซนิกและแอคชูเอเตอร์ระยะชัก 150 มม. เพื่อรักษาการจัดตำแหน่งของวัสดุที่ป้อนจากม้วนระหว่างการผลิต\u003c\/p\u003e\n\u003ch2\u003eรายละเอียดสำคัญ\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eรุ่น\u003c\/th\u003e\n\u003ctd\u003eEPC-A18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eประเภทระบบ\u003c\/th\u003e\n\u003ctd\u003eระบบนำทางเว็บเซอร์โว \/ ระบบควบคุมตำแหน่งขอบ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eเซ็นเซอร์ในรายการนี้\u003c\/th\u003e\n\u003ctd\u003eเซ็นเซอร์อัลตราโซนิก\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eระยะชักแอคชูเอเตอร์\u003c\/th\u003e\n\u003ctd\u003e150 มม.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eโหมดการนำทาง\u003c\/th\u003e\n\u003ctd\u003eการนำทางขอบ (EPC), การนำทางเส้น (LPC), การนำทางกึ่งกลาง (CPC) และการควบคุมการแกว่ง (SPC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eประเภทเซ็นเซอร์ที่รองรับ\u003c\/th\u003e\n\u003ctd\u003eเซ็นเซอร์โฟโตอิเล็กทริก, เซ็นเซอร์อัลตราโซนิก, เซ็นเซอร์มาร์กสี และเซ็นเซอร์นำทางเว็บที่เกี่ยวข้อง\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eอินเทอร์เฟซ\u003c\/th\u003e\n\u003ctd\u003eหน้าจอสัมผัสสี HMI พร้อมคำแนะนำพารามิเตอร์และฟังก์ชันช่วยเหลือออนไลน์\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eอ้างอิง SKU\u003c\/th\u003e\n\u003ctd\u003eFMF-EPC-A18-44313\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eการใช้งานทั่วไป\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eการจัดตำแหน่งฟิล์ม กระดาษ บรรจุภัณฑ์แบบยืดหยุ่น และวัสดุเว็บ\u003c\/li\u003e\n\u003cli\u003eเครื่องจักรบรรจุภัณฑ์ที่ต้องการการแก้ไขขอบอัตโนมัติ\u003c\/li\u003e\n\u003cli\u003eสายการผลิตแบตเตอรี่ที่ต้องการการนำทางเว็บที่เสถียร\u003c\/li\u003e\n\u003cli\u003eสายการจัดการสิ่งทอและผ้าที่ต้องการการติดตามขอบ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eก่อนสั่งซื้อ\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eยืนยันประเภทเซ็นเซอร์ ระยะชักแอคชูเอเตอร์ และพื้นที่ติดตั้งบนเครื่องจักรของคุณ\u003c\/li\u003e\n\u003cli\u003eตรวจสอบว่ากระบวนการของคุณต้องการการนำทางขอบ การนำทางเส้น การนำทางกึ่งกลาง หรือการควบคุมการแกว่ง\u003c\/li\u003e\n\u003cli\u003eเปรียบเทียบตัวควบคุม เซ็นเซอร์ แอคชูเอเตอร์ และการเดินสายเคเบิลกับระบบนำทางเว็บปัจจุบันของคุณ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eคำถามที่พบบ่อย\u003c\/h2\u003e\n\u003ch3\u003eระบบนี้ใช้ทำอะไร?\u003c\/h3\u003e\n\u003cp\u003eใช้ตรวจจับตำแหน่งเว็บและขับเคลื่อนการควบคุมการแก้ไข เพื่อให้วัสดุที่ป้อนจากม้วนคงการจัดตำแหน่งระหว่างการผลิต\u003c\/p\u003e\n\u003ch3\u003eรายการนี้สำหรับการกำหนดค่าระยะชัก 150 มม. หรือไม่?\u003c\/h3\u003e\n\u003cp\u003eใช่ หน้านี้เป็นระบบนำทางเว็บเซอร์โว EPC-A18 ที่กำหนดค่าด้วยเซ็นเซอร์อัลตราโซนิกและระยะชัก 150 มม.\u003c\/p\u003e\n\u003ch3\u003eสามารถรองรับโหมดนำทางเว็บที่แตกต่างกันได้หรือไม่?\u003c\/h3\u003e\n\u003cp\u003eได้ ข้อมูลผลิตภัณฑ์ระบุการนำทางขอบ (EPC), การนำทางเส้น (LPC), การนำทางกึ่งกลาง (CPC) และการควบคุมการแกว่ง (SPC)\u003c\/p\u003e\n\u003ch3\u003eควรตรวจสอบอะไรก่อนซื้อ?\u003c\/h3\u003e\n\u003cp\u003eตรวจสอบประเภทเซ็นเซอร์ ระยะชักแอคชูเอเตอร์ พื้นที่ติดตั้งบนเครื่องจักร การเดินสาย และโหมดนำทางที่ต้องการตามวัสดุและสายการผลิตของคุณ\u003c\/p\u003e","brand":"FMF","offers":[{"title":"ชื่อเริ่มต้น","offer_id":43370953769049,"sku":"FMF-EPC-A18-44313","price":508.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S385affa5f7304529928a41b03f41beded.webp?v=1780390897"},{"product_id":"ps-400s-us-400s-zps-2-epc-web-guide-sensor-mount-bracket-adjustable-holder-for-ultrasonic-photoelectric-ccd-edge-tracking-sensor","title":"PS-400S US-400S ZPS-2 Web Guide Edge Sensor \u0026 Adjustable Mount Bracket","description":"\u003csection\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003ePS-400S, US-400S, ZPS-2 and the matching adjustable mounting bracket are web guide edge tracking parts for EPC systems. Use the option selector to choose the photoelectric sensor, ultrasonic edge sensor, ZPS-2 sensor, or bracket needed for your web guiding setup.\u003c\/p\u003e\n\u003cp\u003eThe adjustable bracket helps position edge tracking sensors for roll material alignment. The sensor options are used with EPC web guide systems for film, paper, tape and other supported roll materials.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eAvailable Options\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\" border=\"1\" cellspacing=\"0\" cellpadding=\"8\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"text-align: left;\"\u003eOption\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eSKU\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eTypical role\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Bracket\u003c\/td\u003e\n\u003ctd\u003eFMF-PS-400S-71993-MOUNTING-BRACKET\u003c\/td\u003e\n\u003ctd\u003eAdjustable holder for positioning a compatible web guide edge sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUS-400S\u003c\/td\u003e\n\u003ctd\u003eFMF-PS-400S-71993-US-400S\u003c\/td\u003e\n\u003ctd\u003eUltrasonic edge sensor option for EPC web guiding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePS-400S\u003c\/td\u003e\n\u003ctd\u003eFMF-PS-400S-71993-PS-400S\u003c\/td\u003e\n\u003ctd\u003ePhotoelectric edge sensor option for EPC web guiding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZPS-2\u003c\/td\u003e\n\u003ctd\u003eFMF-PS-400S-71993-ZPS-2\u003c\/td\u003e\n\u003ctd\u003ePhotoelectric sensor option for edge tracking systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSelection Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eChoose the bracket when you only need the adjustable sensor holder.\u003c\/li\u003e\n\u003cli\u003eChoose US-400S when your setup calls for an ultrasonic edge sensor for EPC web guiding.\u003c\/li\u003e\n\u003cli\u003eChoose PS-400S when your setup calls for a photoelectric edge sensor.\u003c\/li\u003e\n\u003cli\u003eChoose ZPS-2 only when that exact sensor model matches your machine or replacement requirement.\u003c\/li\u003e\n\u003cli\u003eConfirm the model name, connector\/cable needs, controller compatibility and installation dimensions before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eMaterial Fit and Limits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable applications listed for this product include film, paper, tape and other roll materials used in web guiding.\u003c\/li\u003e\n\u003cli\u003eThe ultrasonic option is described for non-breathable materials such as plastic film and paper.\u003c\/li\u003e\n\u003cli\u003eDo not use this listing as confirmation for breathable fabric or non-woven material applications unless your machine supplier confirms the exact sensor choice.\u003c\/li\u003e\n\u003cli\u003eExact wiring, voltage, output signal, detection range and accuracy should be checked against your machine requirements or supplier documentation before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs this listing for a bracket or for sensors?\u003c\/h3\u003e\n\u003cp\u003eIt includes selectable options. You can choose the mounting bracket, US-400S ultrasonic edge sensor, PS-400S photoelectric edge sensor, or ZPS-2 sensor option from the product selector.\u003c\/p\u003e\n\u003ch3\u003eWhat is it used for?\u003c\/h3\u003e\n\u003cp\u003eThese parts are used around EPC web guide edge tracking systems to detect or position the edge of roll materials such as film, paper and tape.\u003c\/p\u003e\n\u003ch3\u003eCan I use it for non-woven fabric?\u003c\/h3\u003e\n\u003cp\u003eThe current product information says breathable materials such as fabric and non-woven materials are not suitable. Please confirm with your machine supplier before using it for those materials.\u003c\/p\u003e\n\u003ch3\u003eWhat should I confirm before ordering?\u003c\/h3\u003e\n\u003cp\u003eConfirm the exact model, sensor type, mounting requirement, cable or connector needs, controller compatibility and installation space. If your machine requires a specific voltage, output or detection range, verify those details before ordering.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Mounting Bracket","offer_id":43370954260569,"sku":"FMF-PS-400S-71993-MOUNTING-BRACKET","price":24.02,"currency_code":"USD","in_stock":true},{"title":"US-400S","offer_id":43370954293337,"sku":"FMF-PS-400S-71993-US-400S","price":75.15,"currency_code":"USD","in_stock":true},{"title":"PS-400S","offer_id":43370954326105,"sku":"FMF-PS-400S-71993-PS-400S","price":62.04,"currency_code":"USD","in_stock":true},{"title":"ZPS-2","offer_id":43370954358873,"sku":"FMF-PS-400S-71993-ZPS-2","price":55.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sd13d490dcea54bff97c4e3059f1fe8705.webp?v=1780390903"},{"product_id":"gdj-211-color-mark-sensor-photo-eye-gdj211bg-bag-making-machine-photoelectric-sensor-detector","title":"GDJ-211 Color Mark Photoelectric Sensor GDJ211BG for Bag Making Machines","description":"\u003csection\u003e\n\u003ch2\u003eGDJ-211 Color Mark Photoelectric Sensor for Bag Making Machines\u003c\/h2\u003e\n\u003cp\u003eThe GDJ-211 \/ GDJ211BG is a color mark photoelectric sensor photo eye supplied for bag making machine and industrial automation sensor replacement needs. It is listed under FMF Supply's automation control components with SKU FMF-GDJ-211-17177.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eGDJ-211 \/ GDJ211BG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003ePhotoelectric sensor \/ color mark sensor photo eye\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApplication wording\u003c\/th\u003e\n\u003ctd\u003eBag making machine photoelectric sensor detector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eFMF-GDJ-211-17177\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStore category\u003c\/th\u003e\n\u003ctd\u003eBusiness \u0026amp; Industrial automation control component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSelection Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse this page when you are matching the GDJ-211 or GDJ211BG model name, color mark sensor wording, or photo eye sensor wording from your existing machine.\u003c\/li\u003e\n\u003cli\u003eCompare the product images and SKU with your current sensor before ordering.\u003c\/li\u003e\n\u003cli\u003eIf your installation depends on wiring, voltage, output mode, detection distance, or controller compatibility, confirm those specifications before purchase because they are not in the current listing data.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs This product for the GDJ-211 \/ GDJ211BG sensor?\u003c\/h3\u003e\n\u003cp\u003eYes. The Shopify product data identifies this item as GDJ-211 \/ GDJ211BG, a color mark photoelectric sensor photo eye.\u003c\/p\u003e\n\u003ch3\u003eCan I use it for a bag making machine?\u003c\/h3\u003e\n\u003cp\u003eThe product details data describes it as a bag making machine photoelectric sensor detector. Match the model and physical sensor style with your machine before ordering.\u003c\/p\u003e\n\u003ch3\u003eAre voltage, output, or wiring details confirmed?\u003c\/h3\u003e\n\u003cp\u003eNot in the current product details data. Confirm those electrical details before purchase if they are required for your installation.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"ชื่อเริ่มต้น","offer_id":43370956390489,"sku":"FMF-GDJ-211-17177","price":51.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Seea1895e08fd4698877a5221bc5f4847k.webp?v=1780390931"},{"product_id":"pg600a-web-guiding-control-system-600mm-edge-controller","title":"PG600A All-in-One Web Guiding Control System, 600mm Line Edge Controller","description":"\u003ch2\u003ePG600A all-in-one web guiding control system\u003c\/h2\u003e\n\u003cp\u003eThe PG600A is an all-in-one web guiding control system for line and edge position correction in printing, packaging, label, and non-woven production lines. It is designed for roll-fed materials where the web position must be kept aligned during continuous processing.\u003c\/p\u003e\n\u003ch2\u003eKey details\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003ePG600A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSystem type\u003c\/th\u003e\n\u003ctd\u003eAll-in-one web guiding control system \/ line edge position controller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eListed configuration\u003c\/th\u003e\n\u003ctd\u003e600 mm line edge position controller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTypical industries\u003c\/th\u003e\n\u003ctd\u003eLabel printing, packaging, and non-woven production\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrive and positioning\u003c\/th\u003e\n\u003ctd\u003ePrecision ball screw bar for positioning control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGuiding speed\u003c\/th\u003e\n\u003ctd\u003e40 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorking environment\u003c\/th\u003e\n\u003ctd\u003e-10 to 60 C, RH below 90%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSensor options\u003c\/th\u003e\n\u003ctd\u003eUltrasonic, photoelectric, color mark, or CCD sensor selection based on material type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSensor installation\u003c\/th\u003e\n\u003ctd\u003eLeft or right sensor position should be confirmed before ordering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU reference\u003c\/th\u003e\n\u003ctd\u003eFMF-PG600A-87193\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eApplication fit\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrinting and packaging lines that need line or edge correction.\u003c\/li\u003e\n\u003cli\u003eLabel production where material alignment affects print and cutting accuracy.\u003c\/li\u003e\n\u003cli\u003eNon-woven material handling and other flexible web processes.\u003c\/li\u003e\n\u003cli\u003eCustom roller length, roller width, sensor position, and fixture choices when the machine layout requires confirmation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm the web width, roller size, available mounting space, and required guiding travel.\u003c\/li\u003e\n\u003cli\u003eSelect the sensor type according to material behavior, transparency, color mark use, and edge detection method.\u003c\/li\u003e\n\u003cli\u003eConfirm whether your cutting station needs a manual fixture or air fixture.\u003c\/li\u003e\n\u003cli\u003eShare the left\/right sensor position and any custom size requirements before production.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is the PG600A used for?\u003c\/h3\u003e\n\u003cp\u003eIt is used to control web line or edge position so roll-fed material stays aligned during printing, packaging, labeling, or non-woven production.\u003c\/p\u003e\n\u003ch3\u003eWhich sensor type should I choose?\u003c\/h3\u003e\n\u003cp\u003eThe product information lists ultrasonic, photoelectric, color mark, and CCD sensor options. The right choice depends on the material type, edge condition, and whether the process tracks an edge, line, or mark.\u003c\/p\u003e\n\u003ch3\u003eCan the roller and fixture be customized?\u003c\/h3\u003e\n\u003cp\u003eThe product information lists customizable roller length and width, plus manual or air fixture options at the cutting station. Confirm the required dimensions and fixture style before ordering.\u003c\/p\u003e\n\u003ch3\u003eWhat should I verify before purchase?\u003c\/h3\u003e\n\u003cp\u003eConfirm web width, mounting dimensions, sensor type, sensor side, fixture style, and the machine layout so the PG600A configuration matches your production line.\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Default Title","offer_id":43370960846937,"sku":"FMF-PG600A-87193","price":1154.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S67d8eb1f99c545e694a438183f820f29A.webp?v=1780391035"},{"product_id":"epc-a12-edge-guiding-system-web-guide-controller-sensor-servo-actuator-edge-position-control","title":"EPC-A12 Web Guide Controller Kit with Sensor and Servo Actuator","description":"\u003cp\u003e\u003cstrong\u003eEPC-A12 web guide controller kit\u003c\/strong\u003e for industrial web, roll and strip position correction. This listing is a single-sensor kit: one EPC-A12 controller, one selected sensor type and one PD-204L150T servo actuator. The controller can be used in different correction setups, but the working mode depends on the matched sensor signal, the number of sensors, the actuator or guide-frame layout and the controller settings.\u003c\/p\u003e\n\n\u003ch2\u003eKit Configuration and Mode Selection\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThis product kit:\u003c\/strong\u003e one sensor is included. Choose either the ultrasonic sensor type or the photoelectric sensor type.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle edge or single line correction:\u003c\/strong\u003e a single-sensor setup is normally used for single-side edge guiding or single-line guiding.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter or serpentine correction:\u003c\/strong\u003e this normally requires two same-type sensors, plus the matched actuator or center guide frame and two sensor brackets.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor type must be selected in the controller:\u003c\/strong\u003e the controller menu supports ultrasonic, photoelectric and optional HCCD detector selection. This listing offers ultrasonic or photoelectric variants only.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDo not treat EPC\/LPC\/CPC\/SPC as sensor-only functions:\u003c\/strong\u003e they are correction modes created by the controller, sensor input, mechanical installation and setup working together.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCorrection Modes\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\" border=\"1\" cellspacing=\"0\" cellpadding=\"8\"\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align: left;\"\u003eMode\u003c\/th\u003e\n      \u003cth style=\"text-align: left;\"\u003eMeaning\u003c\/th\u003e\n      \u003cth style=\"text-align: left;\"\u003eWhat the buyer should confirm\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eEPC\u003c\/td\u003e\n      \u003ctd\u003eEdge Position Control, edge guiding\u003c\/td\u003e\n      \u003ctd\u003eUsually fits the single-sensor kit when the selected sensor can detect the material edge.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLPC\u003c\/td\u003e\n      \u003ctd\u003eLine Position Control, line tracking\u003c\/td\u003e\n      \u003ctd\u003eRequires a detectable line, mark or signal condition. The single-sensor package can be used only when the sensor and material setup are suitable.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCPC\u003c\/td\u003e\n      \u003ctd\u003eCenter Position Control, center guiding\u003c\/td\u003e\n      \u003ctd\u003eNormally needs two same-type sensors and the matched guide-frame or actuator layout. Ask for a dual-sensor configuration.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSPC\u003c\/td\u003e\n      \u003ctd\u003eSerpentine Position Control, offset or serpentine correction\u003c\/td\u003e\n      \u003ctd\u003eNormally needs two same-type sensors, proper actuator layout and parameter setup. Ask before ordering a standard single-sensor kit.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eSensor Type Selection\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\" border=\"1\" cellspacing=\"0\" cellpadding=\"8\"\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align: left;\"\u003eSensor option\u003c\/th\u003e\n      \u003cth style=\"text-align: left;\"\u003eBest-fit use\u003c\/th\u003e\n      \u003cth style=\"text-align: left;\"\u003eSetup notes\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eUS-400S ultrasonic sensor\u003c\/td\u003e\n      \u003ctd\u003eEdge guiding for transparent, opaque and very transparent non-breathable web materials such as plastic film, paper and foil.\u003c\/td\u003e\n      \u003ctd\u003eUltrasonic detection is not affected by material transparency and normally does not need material transparency calibration. Not suitable for breathable or porous materials such as cloth and non-woven fabric.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePS-400S photoelectric sensor\u003c\/td\u003e\n      \u003ctd\u003eEdge guiding where the material edge can be detected reliably by photoelectric through-beam sensing.\u003c\/td\u003e\n      \u003ctd\u003ePhotoelectric detection is affected by material color, transparency and reflectivity, so it needs calibration for different materials. It is commonly used for opaque material edge guiding.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOptional HCCD sensor\u003c\/td\u003e\n      \u003ctd\u003eLine, pattern, contrast edge or more complex target tracking.\u003c\/td\u003e\n      \u003ctd\u003eOptional HCCD detection can track material edge, contrast edge, line and pattern targets. HCCD is not included in this listing unless quoted separately.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eController and Actuator Specifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eController supply: DC24 V to DC45 V, standard 24 V.\u003c\/li\u003e\n  \u003cli\u003eSensor supply: DC12 V, 350 mA max.\u003c\/li\u003e\n  \u003cli\u003eAnalog input: 3 channels, 0-5 V, 20 K impedance, 12-bit ADC.\u003c\/li\u003e\n  \u003cli\u003eSwitch input: 3 NPN inputs.\u003c\/li\u003e\n  \u003cli\u003eCorrection response time: 0.5 ms.\u003c\/li\u003e\n  \u003cli\u003eSupported detector type selection: ultrasonic, photoelectric and optional HCCD.\u003c\/li\u003e\n  \u003cli\u003ePD-204L150 actuator family: 150 mm stroke, 2 kN class thrust, 40 mm\/s max drive speed, +\/-75 mm travel reference.\u003c\/li\u003e\n  \u003cli\u003eServo actuator design: brushless DC servo motor with precision ball screw and encoder-based position calculation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat Is Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x EPC-A12 web guide controller.\u003c\/li\u003e\n  \u003cli\u003e1 x selected sensor type: ultrasonic type or photoelectric type.\u003c\/li\u003e\n  \u003cli\u003e1 x PD-204L150T servo actuator.\u003c\/li\u003e\n  \u003cli\u003eSensor bracket, power supply and connection cables as supplied with the kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e this standard listing is not a dual-sensor CPC\/SPC package. If your project needs center guiding, serpentine correction, HCCD tracking or a guide-frame version, confirm the required sensor quantity and mechanical layout before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFilm, paper, foil, label, printing and converting web guide applications.\u003c\/li\u003e\n  \u003cli\u003eBag making machines, slitting machines, cutters, rewinders and roll-to-roll equipment.\u003c\/li\u003e\n  \u003cli\u003eIndustrial edge guiding where material edge or line position must be corrected during web movement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eDoes one ultrasonic or photoelectric sensor realize EPC, LPC, CPC and SPC?\u003c\/h3\u003e\n\u003cp\u003eNo. EPC, LPC, CPC and SPC are controller-based correction modes. A single sensor is normally used for single edge or single line guiding. CPC and SPC normally require two same-type sensors and the matched mechanical setup.\u003c\/p\u003e\n\n\u003ch3\u003eWhich sensor should I choose for transparent film?\u003c\/h3\u003e\n\u003cp\u003eChoose ultrasonic when the web is non-breathable and transparency makes photoelectric detection difficult. Ultrasonic detection is not affected by transparency, but it is not recommended for breathable materials such as cloth or non-woven fabric.\u003c\/p\u003e\n\n\u003ch3\u003eWhen should I choose photoelectric?\u003c\/h3\u003e\n\u003cp\u003eChoose photoelectric when the material edge can be detected reliably by photoelectric through-beam sensing, especially for opaque or stable materials. Photoelectric sensing needs calibration because color, transparency and reflectivity can change the signal.\u003c\/p\u003e\n\n\u003ch3\u003eCan this kit do center guiding or serpentine correction?\u003c\/h3\u003e\n\u003cp\u003eThe controller supports those correction setups, but the standard single-sensor listing is not the complete CPC or SPC package. For center guiding or serpentine correction, ask for the dual-sensor configuration and confirm the guide-frame or actuator layout.\u003c\/p\u003e\n\n\u003ch3\u003eWhat information should I send before ordering?\u003c\/h3\u003e\n\u003cp\u003eSend your material type, transparency or breathability, web width, required correction mode, machine speed, actuator stroke requirement and whether you need edge, line, center or serpentine correction.\u003c\/p\u003e\n","brand":"FMF","offers":[{"title":"Photoelectric Type","offer_id":43370966712409,"sku":"FMF-EPC-A12-19353-PHOTOELECTRIC-TYPE","price":677.86,"currency_code":"USD","in_stock":true},{"title":"Ultrasonic Type","offer_id":43370966745177,"sku":"FMF-EPC-A12-19353-ULTRASONIC-TYPE","price":677.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Se879eabaca7a4a419586b77af78c1351J.webp?v=1780391147"},{"product_id":"epc-a12-ccd-edge-line-web-guide-system-pd403l150t-400kg-actuator","title":"EPC-A12 CCD Edge\/Line Web Guide System with PD403L150T 400kg Actuator","description":"\u003ch2\u003eEPC-A12 CCD edge\/line web guide system with PD403L150T actuator\u003c\/h2\u003e\n\u003cp\u003eThis listing is for an EPC-A12 controller kit supplied with an HCCD\/CCD camera sensor and a PD403L150T servo actuator. In this configuration, the set is intended for visible edge, contrast edge, printed line, printed mark and pattern tracking on roll-to-roll web materials.\u003c\/p\u003e\n\u003cp\u003eThe EPC-A12 controller platform can work with different sensor categories when the correct sensor is matched to the guiding task. This page is for the CCD camera sensor configuration. Ultrasonic, photoelectric and other sensor setups are separate configurations unless specifically confirmed.\u003c\/p\u003e\n\u003ch3\u003eWhat this CCD set is for\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEdge\/line position control where the CCD sensor can see a clear edge, line, printed mark or contrast target\u003c\/li\u003e\n  \u003cli\u003ePrinted web guiding for packaging, label, film and converting lines\u003c\/li\u003e\n  \u003cli\u003eEPC edge guiding and LPC line guiding tasks that need camera-based target recognition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSensor fit\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eIncluded sensor type\u003c\/td\u003e\n\u003ctd\u003eHCCD\/CCD digital camera sensor for line position and edge\/mark tracking\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBest-fit targets\u003c\/td\u003e\n\u003ctd\u003eVisible edge, contrast edge, printed line, printed mark, pattern target\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBefore ordering\u003c\/td\u003e\n\u003ctd\u003eIf the target is transparent, low contrast, irregular, or difficult to see, share material photos, line speed and guiding target so the sensor match can be checked.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eController platform capability vs. this kit\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEPC edge guiding\u003c\/td\u003e\n\u003ctd\u003eAvailable when the CCD sensor can identify the web edge or contrast edge\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLPC line guiding\u003c\/td\u003e\n\u003ctd\u003eAvailable when the CCD sensor can identify a visible line, printed mark or pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCPC center guiding\u003c\/td\u003e\n\u003ctd\u003eRequires a matching center or dual-edge sensor arrangement\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSPC serpentine correction\u003c\/td\u003e\n\u003ctd\u003eDepends on the machine layout and matched sensor\/control configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMain features of the included set\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEPC-A12 edge\/line position controller with color screen and manual\/auto controls\u003c\/li\u003e\n  \u003cli\u003eHCCD\/CCD camera sensor for visible edge, line, printed mark and pattern tracking\u003c\/li\u003e\n  \u003cli\u003ePD403L150T precision linear actuator with 150 mm travel, 400 kg thrust and 30 mm\/s speed\u003c\/li\u003e\n  \u003cli\u003eLinear position encoder feedback on the included actuator\u003c\/li\u003e\n  \u003cli\u003eIncluded power supply accepts 100-240V AC input\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEPC-A12 edge\/line position controller\u003c\/td\u003e\n\u003ctd\u003e1 set\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHCCD\/CCD camera sensor\u003c\/td\u003e\n\u003ctd\u003e1 pc\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePD403L150T servo actuator\u003c\/td\u003e\n\u003ctd\u003e1 set\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e1 pc, AC100-240V input\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCables and bracket mount\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEPC-A12 controller specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eEPC-A12\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eController supply voltage\u003c\/td\u003e\n\u003ctd\u003eDC 24V-45V, standard 24V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMotor drive capacity\u003c\/td\u003e\n\u003ctd\u003e24V-45V, max 10A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEncoder power supply\u003c\/td\u003e\n\u003ctd\u003eDC 15V, max 200mA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAnalog inputs\u003c\/td\u003e\n\u003ctd\u003e3 channels, 0-5V, 20K ohm impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSensor power supply\u003c\/td\u003e\n\u003ctd\u003eDC 12V, max 350mA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCorrection response time\u003c\/td\u003e\n\u003ctd\u003e0.5 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAnalog input resolution\u003c\/td\u003e\n\u003ctd\u003e12-bit ADC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSwitch inputs\u003c\/td\u003e\n\u003ctd\u003e3-channel NPN\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSupported sensor categories\u003c\/td\u003e\n\u003ctd\u003eUltrasonic, photoelectric and CCD, matched according to the guiding task\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eController drive speed range\u003c\/td\u003e\n\u003ctd\u003e1-75 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProtection rating\u003c\/td\u003e\n\u003ctd\u003eIP53\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eIncluded CCD sensor and actuator\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCCD sensor use\u003c\/td\u003e\n\u003ctd\u003eVisible edge, contrast edge, line, printed mark and pattern tracking\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSensor setup\u003c\/td\u003e\n\u003ctd\u003eTarget setup is required so the sensor knows what edge, line or mark to track\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator model\u003c\/td\u003e\n\u003ctd\u003ePD403L150T\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator application\u003c\/td\u003e\n\u003ctd\u003eEPC\/LPC web guiding system\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator travel\u003c\/td\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator thrust\u003c\/td\u003e\n\u003ctd\u003e400 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator speed\u003c\/td\u003e\n\u003ctd\u003e30 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePosition feedback\u003c\/td\u003e\n\u003ctd\u003eLinear position encoder\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrdering notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThis standard set includes the HCCD\/CCD camera sensor and PD403L150T actuator.\u003c\/li\u003e\n  \u003cli\u003eIt does not include ultrasonic, photoelectric or dual-edge center-guiding hardware unless separately confirmed.\u003c\/li\u003e\n  \u003cli\u003eFor low-contrast targets, transparent targets, center guiding, serpentine correction setup or a different actuator stroke\/thrust, contact us before ordering.\u003c\/li\u003e\n  \u003cli\u003eThe plug and voltage are configured according to the customer's shipping country by default.\u003c\/li\u003e\n  \u003cli\u003eFor matching support, share the web material, web width, line speed, target type and installation space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is included in this EPC-A12 set?\u003c\/h4\u003e\n\u003cp\u003eOne set includes the EPC-A12 edge\/line controller, HCCD\/CCD camera sensor, PD403L150T servo actuator, AC100-240V power supply, cables and bracket mount.\u003c\/p\u003e\n\u003ch4\u003eWhat guiding task is this CCD set for?\u003c\/h4\u003e\n\u003cp\u003eIt is for camera-based edge and line guiding where the sensor can identify a visible edge, contrast edge, printed line, printed mark or pattern.\u003c\/p\u003e\n\u003ch4\u003eCan it track printed marks?\u003c\/h4\u003e\n\u003cp\u003eYes. The included CCD sensor is intended for visible printed mark, line and pattern tracking after the target is set up.\u003c\/p\u003e\n\u003ch4\u003eCan this standard set do center guiding?\u003c\/h4\u003e\n\u003cp\u003eThe EPC-A12 controller can be configured for more than one guiding mode, but this standard CCD set is sold for edge\/line target tracking. Center guiding needs the matching sensor arrangement.\u003c\/p\u003e\n\u003ch4\u003eWhat actuator is included?\u003c\/h4\u003e\n\u003cp\u003eThe included actuator is PD403L150T, with 150 mm travel, 400 kg thrust, 30 mm\/s speed and linear position encoder feedback.\u003c\/p\u003e\n\u003ch4\u003eWhat should I check before ordering?\u003c\/h4\u003e\n\u003cp\u003eCheck whether the CCD sensor can clearly see the edge, line, printed mark or pattern to be tracked. For transparent, low-contrast or irregular targets, contact us before ordering.\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Default Title","offer_id":43370966843481,"sku":"FMF-EPC-A12-17657","price":1071.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sa490e897cea5498fa814b23de42bac8d4.webp?v=1780391150"},{"product_id":"epc-a12sr-servo-edge-web-guide-kit-us-400s-ultrasonic-sensor-150mm-2kn-actuator","title":"EPC-A12SR Servo Edge Web Guide Kit with US-400S Ultrasonic Sensor, 150mm 2KN Actuator","description":"\u003ch2\u003eEPC-A12SR servo edge web guide kit with US-400S ultrasonic sensor\u003c\/h2\u003e\n\u003cp\u003eThis listing is for an EPC-A12SR controller kit supplied with a US-400S ultrasonic edge sensor and a PD-204L150T servo actuator. In this standard configuration, the set is intended for non-contact edge detection and servo edge correction on non-breathable moving web materials.\u003c\/p\u003e\n\u003cp\u003eThe US-400S ultrasonic sensor in this set is not suitable for cloth, woven fabric, mesh, porous web material or breathable material. If your material allows air to pass through it, contact us before ordering so we can help check a different sensor configuration.\u003c\/p\u003e\n\u003cp\u003eThe EPC-A12SR controller platform can support more than one guiding mode when it is matched with the required sensor and actuator configuration. Those controller-level capabilities are separate from what is included in this US-400S kit.\u003c\/p\u003e\n\u003ch3\u003eWhat this standard set is for\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle-edge web guiding \/ edge position control on non-breathable moving web materials\u003c\/li\u003e\n  \u003cli\u003eFilm, foil, label stock, plastic sheet and non-breathable strip material edge alignment\u003c\/li\u003e\n  \u003cli\u003ePrinting, packaging, slitting, winding, rewinding and converting lines that need automatic lateral edge correction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaterial fit\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRecommended for this US-400S set\u003c\/td\u003e\n\u003ctd\u003eNon-breathable film, foil, label stock, plastic sheet and similar non-porous web materials\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNot suitable for this US-400S set\u003c\/td\u003e\n\u003ctd\u003eCloth, woven fabric, mesh, porous web material and breathable material\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eController platform capability vs. this kit\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEPC edge guiding\u003c\/td\u003e\n\u003ctd\u003eIncluded with this US-400S ultrasonic edge sensor set for suitable non-breathable materials\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLPC line guiding\u003c\/td\u003e\n\u003ctd\u003eRequires a suitable line, color mark, optical or CCD detection setup\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCPC center guiding\u003c\/td\u003e\n\u003ctd\u003eRequires a matching center or dual-edge sensor arrangement\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSPC serpentine correction\u003c\/td\u003e\n\u003ctd\u003eDepends on the machine layout and matched sensor\/control configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMain features of the included set\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEPC-A12SR edge\/line position controller used here as an ultrasonic edge guiding controller\u003c\/li\u003e\n  \u003cli\u003ePD-204L150T servo actuator with 150 mm stroke and 2KN \/ 200 kgf thrust\u003c\/li\u003e\n  \u003cli\u003eUS-400S ultrasonic sensor for non-contact web edge detection on suitable non-breathable materials\u003c\/li\u003e\n  \u003cli\u003eColor HMI controller with manual\/auto operation and direction controls\u003c\/li\u003e\n  \u003cli\u003eIncluded power supply accepts 100-240V AC input and outputs 24V DC for the control system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEPC-A12SR correction controller\u003c\/td\u003e\n\u003ctd\u003e1 pc\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePD-204L150T servo actuator\u003c\/td\u003e\n\u003ctd\u003e1 pc\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUS-400S ultrasonic edge sensor\u003c\/td\u003e\n\u003ctd\u003e1 pc\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e1 pc, 100-240V AC input\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConnecting cables\u003c\/td\u003e\n\u003ctd\u003e3 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMounting bracket\u003c\/td\u003e\n\u003ctd\u003e1 pc\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eController specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eEPC-A12SR\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eController supply voltage\u003c\/td\u003e\n\u003ctd\u003eDC 24V-45V, standard 24V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMotor drive capacity\u003c\/td\u003e\n\u003ctd\u003e24V-45V, max 10A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAnalog inputs\u003c\/td\u003e\n\u003ctd\u003e3 channels, 0-5V, 20K ohm impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSensor power supply\u003c\/td\u003e\n\u003ctd\u003eDC 12V, max 350mA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCorrection response time\u003c\/td\u003e\n\u003ctd\u003e0.5 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAnalog input resolution\u003c\/td\u003e\n\u003ctd\u003e12-bit ADC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSwitch inputs\u003c\/td\u003e\n\u003ctd\u003e3-channel NPN\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSupported sensor categories\u003c\/td\u003e\n\u003ctd\u003eUltrasonic, photoelectric, color mark, CCD, matched according to the guiding task\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eController drive speed range\u003c\/td\u003e\n\u003ctd\u003e1-75 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProtection rating\u003c\/td\u003e\n\u003ctd\u003eIP53\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eIncluded US-400S sensor and actuator\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUltrasonic sensor model\u003c\/td\u003e\n\u003ctd\u003eUS-400S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSensor use in this set\u003c\/td\u003e\n\u003ctd\u003eNon-contact edge detection on suitable non-breathable web materials\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSensor supply\u003c\/td\u003e\n\u003ctd\u003eDC 12V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSensor output\u003c\/td\u003e\n\u003ctd\u003eDC 0-5V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDetection range\u003c\/td\u003e\n\u003ctd\u003e8 mm (+\/-4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDetection accuracy\u003c\/td\u003e\n\u003ctd\u003e0.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator model\u003c\/td\u003e\n\u003ctd\u003ePD-204L150T\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator thrust\u003c\/td\u003e\n\u003ctd\u003e2KN \/ 200 kgf\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator stroke\u003c\/td\u003e\n\u003ctd\u003e150 mm (+\/-75 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaximum actuator speed\u003c\/td\u003e\n\u003ctd\u003e40 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrdering notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThis standard set includes the US-400S ultrasonic edge sensor and PD-204L150T actuator.\u003c\/li\u003e\n  \u003cli\u003eDo not choose this US-400S set for cloth, woven fabric, mesh, porous web material or breathable material.\u003c\/li\u003e\n  \u003cli\u003eIt does not include photoelectric, color mark, CCD or dual-edge center-guiding hardware unless separately confirmed.\u003c\/li\u003e\n  \u003cli\u003eFor breathable materials, line guiding, color mark tracking, CCD detection, center guiding, serpentine correction setup or a different actuator stroke\/thrust, contact us before ordering.\u003c\/li\u003e\n  \u003cli\u003eThe plug and voltage are configured according to the customer's shipping country by default.\u003c\/li\u003e\n  \u003cli\u003eFor matching support, share the web material, web width, line speed, guiding mode and installation space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is included in this EPC-A12SR set?\u003c\/h4\u003e\n\u003cp\u003eOne set includes the EPC-A12SR controller, PD-204L150T servo actuator, US-400S ultrasonic edge sensor, power supply, connecting cables and mounting bracket.\u003c\/p\u003e\n\u003ch4\u003eWhat guiding task is this standard US-400S set for?\u003c\/h4\u003e\n\u003cp\u003eIt is for ultrasonic edge detection and servo edge correction on suitable non-breathable moving web materials.\u003c\/p\u003e\n\u003ch4\u003eCan I use this US-400S set for cloth or breathable material?\u003c\/h4\u003e\n\u003cp\u003eNo. The US-400S ultrasonic sensor in this set is not suitable for cloth, woven fabric, mesh, porous web material or breathable material.\u003c\/p\u003e\n\u003ch4\u003eCan this standard set do line guiding or center guiding?\u003c\/h4\u003e\n\u003cp\u003eThe EPC-A12SR controller can be configured for those modes, but this standard US-400S set is sold as an ultrasonic edge guiding kit. Line guiding, color mark tracking, CCD detection or center guiding requires the matching sensor setup.\u003c\/p\u003e\n\u003ch4\u003eWhat actuator is included?\u003c\/h4\u003e\n\u003cp\u003eThe included actuator is PD-204L150T, with 150 mm stroke, 2KN \/ 200 kgf thrust and 40 mm\/s maximum speed.\u003c\/p\u003e\n\u003ch4\u003eWhat sensor is included?\u003c\/h4\u003e\n\u003cp\u003eThe included sensor is the US-400S ultrasonic edge sensor for non-contact web edge detection on suitable non-breathable materials.\u003c\/p\u003e\n\u003ch4\u003eWhat power input does the set use?\u003c\/h4\u003e\n\u003cp\u003eThe included power supply accepts 100-240V AC input and outputs 24V DC for the control system.\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Default Title","offer_id":43370967072857,"sku":"FMF-EPC-A12SR-81497","price":589.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sf1b803765c934cb0a6cbfb930989beb5i.webp?v=1780391154"},{"product_id":"epc-a10-servo-web-guiding-system-edge-line-position-controller-with-color-mark-sensor-pd-204l150t-servo-actuator","title":"EPC-A10 Servo Web Guide System with Color Mark Sensor","description":"\u003csection\u003e\n\u003ch2\u003eEPC-A10 Servo Web Guide System\u003c\/h2\u003e\n\u003cp\u003eThis EPC-A10 servo web guiding system is supplied as a web position control kit for edge-following, line-following, and center-alignment applications. The set includes an EPC-A10 controller, PS-260 color mark sensor, PD-204L150T servo actuator, DC24V power supply, mounting accessories, cables, and user manual.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eIncluded Components\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEPC-A10 servo web guide controller: 1 pc.\u003c\/li\u003e\n\u003cli\u003ePS-260 color mark sensor: 1 pc.\u003c\/li\u003e\n\u003cli\u003ePD-204L150T servo actuator with 150 mm stroke: 1 pc.\u003c\/li\u003e\n\u003cli\u003eDC switching power supply, AC 110-240V input to DC 24V output: 1 pc.\u003c\/li\u003e\n\u003cli\u003eMounting accessories and cables: 1 set.\u003c\/li\u003e\n\u003cli\u003eUser manual: 1 pc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eKey Functions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSupports edge-following, line-following, and center-alignment guiding modes.\u003c\/li\u003e\n\u003cli\u003eWorks with the included PS-260 color mark sensor and supports other sensor configurations such as photoelectric, ultrasonic, or CCD sensors when configured for the application.\u003c\/li\u003e\n\u003cli\u003eDesigned for continuous web guiding where material edge, printed line, or color mark position needs correction during running.\u003c\/li\u003e\n\u003cli\u003eUses a DC servo driver with no-overshoot integral variable PI control.\u003c\/li\u003e\n\u003cli\u003eStores up to 10 groups of material parameters for changeover.\u003c\/li\u003e\n\u003cli\u003eSupports Simplified Chinese, Traditional Chinese, and English menu languages.\u003c\/li\u003e\n\u003cli\u003eSupports Modbus communication and PLC\/HMI networking control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"text-align: left;\"\u003ePart\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEPC-A10 controller\u003c\/td\u003e\n\u003ctd\u003eDC servo driver, DC 24V \/ 5A power, 24V PWM output, 0.5 ms response time, 12-bit AD analog sampling, operating temperature -10°C to +60°C, weight 1.2 kg.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePS-260 color mark sensor\u003c\/td\u003e\n\u003ctd\u003e10-30 VDC power, 15 mm operating distance, +\/-3 mm depth of field with standard 15 mm lens, MARK\/BKGD setting buttons, analog 0-5V output signal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePD-204L150T actuator\u003c\/td\u003e\n\u003ctd\u003e2000 N max thrust, 200 kg driving load, 150 mm stroke range (+\/-75 mm), 40 mm\/s max driving speed.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSensor And Material Notes\u003c\/h2\u003e\n\u003cp\u003eThe included PS-260 color mark sensor is suitable for color mark, line, and contrast-based web guiding tasks. Other sensor types can be configured for different materials: ultrasonic sensors are often selected for transparent film or dusty environments, while CCD and photoelectric sensors may fit edge or line tracking depending on the material and installation.\u003c\/p\u003e\n\u003cp\u003eConfirm the web material, guiding mode, sensor type, actuator load, stroke requirement, and controller wiring before ordering or replacing an existing EPC system.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eCommon Applications\u003c\/h2\u003e\n\u003cp\u003eThis system is used in web handling equipment where moving material needs edge, line, or center position correction, including packaging, printing, paper, textile, metal sheet, film, and automated material handling applications.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is included in this EPC-A10 web guide system?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes the EPC-A10 controller, PS-260 color mark sensor, PD-204L150T servo actuator, DC24V power supply, mounting accessories, cables, and user manual.\u003c\/p\u003e\n\u003ch3\u003eWhich guiding modes does it support?\u003c\/h3\u003e\n\u003cp\u003eIt supports edge-following, line-following, and center-alignment modes.\u003c\/p\u003e\n\u003ch3\u003eWhat is the actuator stroke?\u003c\/h3\u003e\n\u003cp\u003eThe included PD-204L150T actuator has a 150 mm stroke range, listed as +\/-75 mm.\u003c\/p\u003e\n\u003ch3\u003eCan it use other sensors?\u003c\/h3\u003e\n\u003cp\u003eYes. The product notes state that other sensors are also available, including photoelectric, ultrasonic, and CCD sensor configurations. Confirm the material and tracking requirement before selecting another sensor.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"ชื่อเริ่มต้น","offer_id":43370967138393,"sku":"FMF-EPC-A10-47033","price":692.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/970ce614-540d-4a03-a9ca-207768095163.png?v=1781282446"},{"product_id":"epc-a10-servo-web-guide-system-line-edge-position-controller-pd-803l200-actuator-800kg-200mm-us-500-ultrasonic-sensor","title":"EPC-A10 Servo Web Guide System with PD-803L200 Actuator and US-500 Ultrasonic Sensor","description":"\u003cdiv class=\"wrap\"\u003e\n  \u003cdiv class=\"card\"\u003e\n    \u003ch2\u003eEPC-A10 Servo Web Guide System for Edge and Line Position Control\u003c\/h2\u003e\n    \u003cp\u003eThe EPC-A10 web guide system is supplied as a matched set for roll-to-roll edge or line position correction. This configuration includes the EPC-A10 controller, a PD-803L200 servo actuator with 800kg thrust and 200mm travel, and a US-500 ultrasonic sensor.\u003c\/p\u003e\n\n    \u003cdiv class=\"grid\"\u003e\n      \u003cdiv class=\"box\"\u003e\n        \u003ch3\u003ePackage Includes\u003c\/h3\u003e\n        \u003cul\u003e\n          \u003cli\u003eEPC-A10 correction controller: 1 pc\u003c\/li\u003e\n          \u003cli\u003ePD-803L200 servo actuator: 1 pc\u003c\/li\u003e\n          \u003cli\u003eUS-500 ultrasonic sensor: 1 pc\u003c\/li\u003e\n          \u003cli\u003e100-240V AC input power supply: 1 pc\u003c\/li\u003e\n          \u003cli\u003eConnecting cables: 3 pcs\u003c\/li\u003e\n          \u003cli\u003eBracket mount: 1 pc\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"box\"\u003e\n        \u003ch3\u003eBest-Fit Use\u003c\/h3\u003e\n        \u003cp\u003eUse this servo web guide controller set when a production line needs automatic edge-following, line-following, or center-alignment correction for moving web materials. The listed applications include paper and packaging converting systems such as bag-making machines, box-making machines, slitters, cutters, copy paper machines, rollers, winders, feeders, and conveyors.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003ch3\u003eController and System Features\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eThree operating modes: edge-following, line-following, and center-alignment.\u003c\/li\u003e\n      \u003cli\u003eSupports ultrasonic, photoelectric, color mark, and CCD sensor configurations. This set includes the US-500 ultrasonic sensor.\u003c\/li\u003e\n      \u003cli\u003eHigh-speed 32-bit CPU with DC servo driver control.\u003c\/li\u003e\n      \u003cli\u003eNo-overshoot integral variable PI algorithm for fast deviation correction.\u003c\/li\u003e\n      \u003cli\u003eAutomatic travel measurement, reducing the need for a mechanical limit switch.\u003c\/li\u003e\n      \u003cli\u003e0.5 ms PWM response time.\u003c\/li\u003e\n      \u003cli\u003e12-bit AD sampling at 700,000 samples per second.\u003c\/li\u003e\n      \u003cli\u003eFIR digital filtering and return difference filtering for more stable signal handling.\u003c\/li\u003e\n      \u003cli\u003eStores 10 groups of parameters for material changeover.\u003c\/li\u003e\n      \u003cli\u003eSupports Modbus and PLC\/HMI networking control.\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003ch3\u003eKey Specifications\u003c\/h3\u003e\n    \u003ctable style=\"border-collapse:collapse;border:1px solid #dddddd\" border=\"1\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eController model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEPC-A10\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl method\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC servo driver\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eController power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC 24V \/ 5A\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC 0-5A\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24V\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePWM response time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.5 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnvironment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-10 to 60C, below RH90%\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eController weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n\n    \u003ch3\u003eIncluded US-500 Ultrasonic Sensor\u003c\/h3\u003e\n    \u003ctable style=\"border-collapse:collapse;border:1px solid #dddddd\" border=\"1\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUS-500\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC 12V\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC 0-5V\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetection range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetection accuracy\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetection method\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUltrasonic exposure\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShell material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n\n    \u003ch3\u003ePD-803L200 Servo Actuator\u003c\/h3\u003e\n    \u003ctable style=\"border-collapse:collapse;border:1px solid #dddddd\" border=\"1\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePD-803L200\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTravel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThrust\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e800kg\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePushing load\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8000kg\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum driving speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n\n    \u003ch3\u003eSensor Options\u003c\/h3\u003e\n    \u003cp\u003eThis product is standardly supplied with the US-500 ultrasonic sensor. Photoelectric sensor, color mark sensor, and CCD sensor configurations are optional. Contact FMF Supply before ordering if your line requires a different sensor configuration.\u003c\/p\u003e\n\n    \u003ch3\u003eFAQ\u003c\/h3\u003e\n    \u003ch4\u003eWhat does this EPC-A10 web guide system control?\u003c\/h4\u003e\n    \u003cp\u003eIt controls web edge, printed line, or center position deviation by using the sensor signal, EPC-A10 controller, and PD-803L200 actuator to correct the moving material path.\u003c\/p\u003e\n    \u003ch4\u003eWhich sensor is included in this set?\u003c\/h4\u003e\n    \u003cp\u003eThe standard set includes one US-500 ultrasonic sensor. Other sensor types are optional and should be confirmed before ordering.\u003c\/p\u003e\n    \u003ch4\u003eWhat actuator is included?\u003c\/h4\u003e\n    \u003cp\u003eThis configuration includes the PD-803L200 servo actuator with 200mm travel and 800kg thrust.\u003c\/p\u003e\n    \u003ch4\u003eCan this be used for packaging converting lines?\u003c\/h4\u003e\n    \u003cp\u003eYes. The listed applications include paper and packaging converting equipment such as bag-making machines, box-making machines, slitters, cutters, rollers, winders, feeders, and conveyors.\u003c\/p\u003e\n\n    \u003cp\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 servo web guide system with PD-803L200 actuator and US-500 ultrasonic sensor detail image 1\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S5bff1e405c634361aff9094f09d18559U.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 edge line position controller detail image 2\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S43b667435a3d4f04b9729c817acecf2ba.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"PD-803L200 800kg 200mm web guide actuator detail image 3\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S6c10ffc648264322ac8ff084eecbae48P.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"US-500 ultrasonic web edge sensor detail image 4\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S303cdb617d06400c8b1d2676da43fd52J.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 servo web guide controller system detail image 5\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sa060bac1214142f098ea2149304531031.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 web guiding system component detail image 6\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S0f0a4a11c2f34b95beccaa9ec5fc9378c.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 controller and web guide actuator detail image 7\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S4c352599474440d78e96b794ddbb9733t.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"Servo edge position control system detail image 8\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S2786be71298f495f86a466c3800a1e1aj.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"Line edge position web guide controller detail image 9\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S25054d74c01f404fb46ae7b9c89eccf7j.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 web guide system specification detail image 10\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S3d45a48911f748e68eaa193f7b944984y.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"US-500 ultrasonic sensor web guide application detail image 11\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S9335aa4fa8b44eb8aac3350561a0ee49Q.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"PD-803L200 actuator web guiding system detail image 12\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/Se6ece7d1baa34ef799f7338cf55cc492U.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 servo web guide system installation detail image 13\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sba479793555a45899ba4255fe5e39f0fH.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 edge and line position control system detail image 14\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sd29fdd9f9b314058bcf69cfff6689399Y.jpg\"\u003e\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"FMF","offers":[{"title":"Default Title","offer_id":43370967203929,"sku":"FMF-EPC-A10-12569","price":1152.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S6c10ffc648264322ac8ff084eecbae48P.webp?v=1780391158"},{"product_id":"pg200a-all-in-one-servo-web-guiding-system-epc-edge-line-position-controller-with-ultrasonic-sensor","title":"PG200A All-in-One Servo Web Guide with Ultrasonic Sensor","description":"\u003csection\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe PG200A is an all-in-one servo web guiding system for edge and line position control on narrow web materials. It integrates the controller, driver, detector, and servo guide structure in a compact unit, with the default configuration including a US-400S ultrasonic sensor.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003ePackage Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 set PG200A all-in-one web guide system\u003c\/li\u003e\n\u003cli\u003eUS-400S ultrasonic sensor in the default configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf another sensor type is required, confirm the configuration before ordering.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eKey Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for accurate correction of narrow web materials.\u003c\/li\u003e\n\u003cli\u003eSuitable for label printing, packaging, and non-woven material guiding applications.\u003c\/li\u003e\n\u003cli\u003eBrushless DC servo motor drive for low-maintenance operation.\u003c\/li\u003e\n\u003cli\u003ePrecision ball screw mechanism for accurate positioning.\u003c\/li\u003e\n\u003cli\u003eCompact integrated design helps save installation space and reduce setup work.\u003c\/li\u003e\n\u003cli\u003eRoller length, width, and surface treatment can be customized for the application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003ePG200A Technical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePG-200A \/ PG200A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC220V \/ AC110V, 80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive\u003c\/td\u003e\n\u003ctd\u003eBrushless DC servo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller length A\u003c\/td\u003e\n\u003ctd\u003e200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller diameter B\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller width C\u003c\/td\u003e\n\u003ctd\u003e230 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase length D\u003c\/td\u003e\n\u003ctd\u003e255 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeb guide range\u003c\/td\u003e\n\u003ctd\u003e+\/-12 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. tension\u003c\/td\u003e\n\u003ctd\u003e300 N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. speed\u003c\/td\u003e\n\u003ctd\u003e40 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironment\u003c\/td\u003e\n\u003ctd\u003e-10 to 60 degree C, below RH 90%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eUS-400S Ultrasonic Sensor Parameters\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor model\u003c\/td\u003e\n\u003ctd\u003eUS-400S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eDC 12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput signal\u003c\/td\u003e\n\u003ctd\u003eDC 0-5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDetection range\u003c\/td\u003e\n\u003ctd\u003e8 mm (+\/-4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDetection accuracy\u003c\/td\u003e\n\u003ctd\u003e0.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDetection method\u003c\/td\u003e\n\u003ctd\u003eUltrasonic reflection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency\u003c\/td\u003e\n\u003ctd\u003e100 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing material\u003c\/td\u003e\n\u003ctd\u003eAluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSelection Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse PG200A when the 200 mm roller length, 230 mm roller width, and 300 N maximum tension match the web material and machine layout.\u003c\/li\u003e\n\u003cli\u003eChoose an ultrasonic sensor when edge detection needs to work with materials where optical contrast may be limited.\u003c\/li\u003e\n\u003cli\u003eConfirm voltage, web width, roller surface, installation space, and sensor type before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat does the PG200A system include?\u003c\/h3\u003e\n\u003cp\u003eThe default configuration is one PG200A all-in-one servo web guide system with a US-400S ultrasonic sensor.\u003c\/p\u003e\n\u003ch3\u003eWhat materials is it intended for?\u003c\/h3\u003e\n\u003cp\u003eIt is intended for narrow web material guiding, including label printing, packaging, and non-woven material applications when the machine requirements match the listed specifications.\u003c\/p\u003e\n\u003ch3\u003eCan the roller size or surface be customized?\u003c\/h3\u003e\n\u003cp\u003eThe product information supports custom roller length, width, and surface treatment. Confirm the required dimensions and surface before ordering.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"ชื่อเริ่มต้น","offer_id":43370967269465,"sku":"FMF-PG200A-78105","price":979.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sf1559b53618c4ce094ad7deae9c41208u.webp?v=1780391160"},{"product_id":"us-400s-ultrasonic-web-guide-sensor-epc-edge-detection","title":"US-400S เซ็นเซอร์นำทางแผ่นวัสดุแบบอัลตราโซนิกสำหรับตรวจจับขอบ EPC","description":"\u003ch2\u003eUS-400S เซ็นเซอร์นำทางแผ่นวัสดุแบบอัลตราโซนิกชนิดสล็อต\u003c\/h2\u003e\n\u003cp\u003eUS-400S เป็นเซ็นเซอร์อัลตราโซนิกชนิดสล็อตสำหรับระบบนำทางแผ่นวัสดุ EPC ใช้การตรวจจับแบบทะลุผ่านด้วยคลื่นอัลตราโซนิกเพื่อระบุตำแหน่งขอบของวัสดุที่ป้อนเป็นม้วน และส่งสัญญาณแก้ไขไปยังคอนโทรลเลอร์นำทางแผ่นวัสดุ\u003c\/p\u003e\n\u003ch2\u003eรายละเอียดสำคัญ\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eรุ่น\u003c\/th\u003e\n\u003ctd\u003eUS-400S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eประเภทเซ็นเซอร์\u003c\/th\u003e\n\u003ctd\u003eเซ็นเซอร์นำทางแผ่นวัสดุแบบอัลตราโซนิกชนิดสล็อต\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eวิธีการติดตาม\u003c\/th\u003e\n\u003ctd\u003eการติดตามขอบตรงข้าม\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eการใช้งาน\u003c\/th\u003e\n\u003ctd\u003eตรวจจับขอบสำหรับระบบนำทางแผ่นวัสดุ EPC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eแหล่งจ่ายไฟ\u003c\/th\u003e\n\u003ctd\u003eDC12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eสัญญาณเอาต์พุต\u003c\/th\u003e\n\u003ctd\u003eเอาต์พุตแอนะล็อก 0-5V และเอาต์พุตสวิตชิ่ง NPN แบบสองช่องสัญญาณ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eระยะตรวจจับ\u003c\/th\u003e\n\u003ctd\u003e6 มม., +\/-3.0 มม.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eความแม่นยำในการตรวจจับ\u003c\/th\u003e\n\u003ctd\u003e+\/-0.05 มม.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eวิธีการตรวจจับ\u003c\/th\u003e\n\u003ctd\u003e200K การตรวจจับแบบทะลุผ่านด้วยคลื่นอัลตราโซนิกแบบตรงข้าม\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eการเดินสายอ้างอิง\u003c\/th\u003e\n\u003ctd\u003eน้ำตาล +12V, ฟ้า GND, ขาว 0-5VDC, ดำ NPN1, เทา NPN2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eอ้างอิง SKU\u003c\/th\u003e\n\u003ctd\u003eFMF-US-400S-43641\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eวัสดุที่เหมาะสม\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eเหมาะสำหรับวัสดุม้วนที่กันอากาศ เช่น ฟิล์มใสและกระดาษ\u003c\/li\u003e\n\u003cli\u003eไม่เหมาะสำหรับวัสดุที่ระบายอากาศได้ เช่น ผ้าใบหรือผ้าไม่ทอ\u003c\/li\u003e\n\u003cli\u003eมีประโยชน์เมื่อเซ็นเซอร์โฟโตอิเล็กทริกได้รับผลกระทบจากพฤติกรรมของวัสดุโปร่งใส\u003c\/li\u003e\n\u003cli\u003eไม่จำเป็นต้องปรับเทียบด้วยตนเองเป็นประจำระหว่างการใช้งานปกติหลังการตั้งค่า\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eหมายเหตุการใช้งาน\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eเซ็นเซอร์รองรับเอาต์พุตแอนะล็อกหนึ่งช่องและเอาต์พุตสวิตชิ่งสองช่อง\u003c\/li\u003e\n\u003cli\u003eมีสามสถานะให้เลือกสำหรับความต้องการความแม่นยำที่แตกต่างกัน: 0.5 มม., 1.0 มม. และ 2.0 มม.\u003c\/li\u003e\n\u003cli\u003eใช้ปุ่ม SET เพื่อเลือกสถานะที่ต้องการ จากนั้นบันทึกการตั้งค่าหลังการปรับเทียบ\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eคำถามที่พบบ่อย\u003c\/h2\u003e\n\u003ch3\u003eUS-400S ใช้ทำอะไร?\u003c\/h3\u003e\n\u003cp\u003eใช้ตรวจจับตำแหน่งขอบวัสดุในระบบนำทางแผ่นวัสดุ EPC เพื่อให้คอนโทรลเลอร์แก้ไขแนวแผ่นวัสดุ\u003c\/p\u003e\n\u003ch3\u003eทำไมต้องใช้เซ็นเซอร์ขอบแบบอัลตราโซนิกแทนเซ็นเซอร์โฟโตอิเล็กทริก?\u003c\/h3\u003e\n\u003cp\u003eสำหรับวัสดุโปร่งใสที่กันอากาศ การตรวจจับขอบด้วยคลื่นอัลตราโซนิกได้รับผลกระทบจากความโปร่งใสของวัสดุน้อยกว่าเซ็นเซอร์โฟโตอิเล็กทริก\u003c\/p\u003e\n\u003ch3\u003eสามารถใช้กับผ้าไม่ทอได้หรือไม่?\u003c\/h3\u003e\n\u003cp\u003eไม่ได้ วัสดุที่ระบายอากาศได้ เช่น ผ้าใบและผ้าไม่ทอ ไม่สามารถใช้งานได้\u003c\/p\u003e\n\u003ch3\u003eควรยืนยันอะไรก่อนสั่งซื้อ?\u003c\/h3\u003e\n\u003cp\u003eยืนยันว่าคอนโทรลเลอร์ของคุณรองรับแหล่งจ่ายไฟ DC12V, เอาต์พุตแอนะล็อก 0-5V และเอาต์พุตสวิตชิ่ง NPN ที่ระบุ และตรวจสอบตำแหน่งติดตั้งเซ็นเซอร์กับระบบนำทางแผ่นวัสดุปัจจุบันของคุณ\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S1a285d5605294a5c939bf5d836a8927cb.png\" height=\"auto\" width=\"750\" loading=\"lazy\" decoding=\"async\" alt=\"US-400S ultrasonic web guide sensor outline dimensions\" style=\"max-width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"FMF","offers":[{"title":"ชื่อเริ่มต้น","offer_id":43370967335001,"sku":"FMF-US-400S-43641","price":70.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sb93812418f6b47c4bb53fcdd4191fefdT.webp?v=1780391162"},{"product_id":"ktc812-semi-automatic-tension-controller-with-hall-sensor-coil-tension-magnetic-powder-brake-clutch-torque-control","title":"KTC812 Semi-Automatic Taper Tension Controller for Magnetic Powder Brake\/Clutch","description":"\u003csection\u003e\n\u003ch2\u003eKTC812 Semi-Automatic Taper Tension Controller\u003c\/h2\u003e\n\u003cp\u003eThe KTC812 is a semi-automatic coil diameter tension controller for reeling, winding, and web tension control systems that use a magnetic powder brake or magnetic powder clutch. It calculates coil radius change from a compatible encoder or proximity switch input, then adjusts the tension output for constant tension or taper tension control.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eMain Functions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eManual or automatic operation for coil winding and reeling control.\u003c\/li\u003e\n\u003cli\u003eAdjustable torque compensation for magnetic powder brake or clutch applications.\u003c\/li\u003e\n\u003cli\u003eAutomatic coil radius calculation from encoder or proximity switch input.\u003c\/li\u003e\n\u003cli\u003eConstant tension and taper tension control for roll-to-roll material handling.\u003c\/li\u003e\n\u003cli\u003eStores parameters for up to 9 different materials.\u003c\/li\u003e\n\u003cli\u003eAutomatic memory of system parameters and status.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eKTC812\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eController type\u003c\/th\u003e\n\u003ctd\u003eSemi-automatic taper tension controller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower input\u003c\/th\u003e\n\u003ctd\u003eAC100-264V, 50-60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl output\u003c\/th\u003e\n\u003ctd\u003eDC0-24V \/ 4A for magnetic powder clutch or brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput signal\u003c\/th\u003e\n\u003ctd\u003eSpindle pulse signal, compatible with encoder or proximity switch; winding diameter reset signal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAuxiliary power\u003c\/th\u003e\n\u003ctd\u003eDC24V for proximity switch or encoder power supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl method\u003c\/th\u003e\n\u003ctd\u003eThickness accumulation method\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eFMF-KTC812-47577\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eParameter Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInitial radius\u003c\/li\u003e\n\u003cli\u003eMaterial thickness\u003c\/li\u003e\n\u003cli\u003eTaper coefficient\u003c\/li\u003e\n\u003cli\u003eStarting compensation point\u003c\/li\u003e\n\u003cli\u003eCompensation coefficient\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is the KTC812 used for?\u003c\/h3\u003e\n\u003cp\u003eIt is used to control coil or web tension in winding and reeling systems, especially where magnetic powder brakes or clutches are used for torque control.\u003c\/p\u003e\n\u003ch3\u003eCan it work with an encoder or proximity switch?\u003c\/h3\u003e\n\u003cp\u003eYes. The listed input supports a spindle pulse signal compatible with an encoder or proximity switch, plus a winding diameter reset signal.\u003c\/p\u003e\n\u003ch3\u003eWhat output does it provide for the brake or clutch?\u003c\/h3\u003e\n\u003cp\u003eThe controller output is DC0-24V \/ 4A for a magnetic powder clutch or brake, with overcurrent protection listed in the product data.\u003c\/p\u003e\n\u003ch3\u003eWhat should I confirm before ordering?\u003c\/h3\u003e\n\u003cp\u003eConfirm your brake or clutch current requirement, signal type, machine wiring, installation space, and whether your system uses the same coil-diameter tension control method.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Default Title","offer_id":43370970447961,"sku":"FMF-KTC812-47577","price":66.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S4915f8d237fe4e9da61189ea90f3f3fcx.webp?v=1780391213"},{"product_id":"ps-260-reflective-color-mark-sensor-tracking-photoelectric-eye-applied-with-epc-a10-epc-d12-web-guiding-controller","title":"PS-260 Reflective Color Mark Sensor Photoelectric Eye","description":"\u003csection\u003e\n\u003ch2\u003ePS-260 Reflective Color Mark Sensor for Web Guiding\u003c\/h2\u003e\n\u003cp\u003eThe PS-260 is a reflective color mark sensor \/ photoelectric eye for mark tracking in web guiding setups. It is designed for use with EPC-A10 and EPC-D12 web guiding controllers.\u003c\/p\u003e\n\u003cp\u003eThis product includes one PS-260 sensor and one cable. The EPC controller is not included.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReflective color mark sensor \/ photoelectric eye for tracking marks on moving web materials.\u003c\/li\u003e\n\u003cli\u003eIntelligent red, green, and blue light source selection.\u003c\/li\u003e\n\u003cli\u003eSmart calibration without potentiometer adjustment.\u003c\/li\u003e\n\u003cli\u003eTracking methods listed: edge, pair tracking, and same color.\u003c\/li\u003e\n\u003cli\u003eApplied with EPC-A10 \/ EPC-D12 web guiding controller setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003ePS-260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower Input\u003c\/th\u003e\n\u003ctd\u003eDC10V-30V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOutput Signal\u003c\/th\u003e\n\u003ctd\u003eAnalog 0-5V \/ switching signal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDetection Range\u003c\/th\u003e\n\u003ctd\u003e9mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDetection Accuracy\u003c\/th\u003e\n\u003ctd\u003e0.01mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDetection Method\u003c\/th\u003e\n\u003ctd\u003ePhotoelectric radiation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eResponse Frequency\u003c\/th\u003e\n\u003ctd\u003e10K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShell Material\u003c\/th\u003e\n\u003ctd\u003eAluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection Level\u003c\/th\u003e\n\u003ctd\u003eIP64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e170g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003ePackage Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePS-260 sensor: 1 pc\u003c\/li\u003e\n\u003cli\u003eCable: 1 pc\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is the PS-260 used for?\u003c\/h3\u003e\n\u003cp\u003eIt is used as a reflective color mark sensor \/ photoelectric eye for mark tracking in web guiding or correction setups.\u003c\/p\u003e\n\u003ch3\u003eWhich controller is it designed for?\u003c\/h3\u003e\n\u003cp\u003ethis product is used with EPC-A10 and EPC-D12 web guiding controllers.\u003c\/p\u003e\n\u003ch3\u003eWhat power input does it use?\u003c\/h3\u003e\n\u003cp\u003eThe listed power input is DC10V-30V.\u003c\/p\u003e\n\u003ch3\u003eWhat is included?\u003c\/h3\u003e\n\u003cp\u003eOne PS-260 sensor and one cable are included. The controller is not included.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cp\u003e\n\u003cimg alt=\"PS-260 reflective color mark sensor photoelectric eye for EPC-A10 EPC-D12 web guiding detail image 1\" src=\"https:\/\/ae01.alicdn.com\/kf\/S9ac1212c6a9e44b09e1092de9c5c8ce4F.jpg\"\u003e\n\u003cimg alt=\"PS-260 color mark sensor DC10-30V specification detail image 2\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sdb731967c4af4b9cbd59038194067102D.jpg\"\u003e\n\u003cimg alt=\"PS-260 photoelectric eye analog 0-5V switching output detail image 3\" src=\"https:\/\/ae01.alicdn.com\/kf\/S947b3eb22d3844abb3292d75b8cfe360l.jpg\"\u003e\n\u003cimg alt=\"PS-260 web guide sensor package with cable detail image 4\" src=\"https:\/\/ae01.alicdn.com\/kf\/S81e758fb2e9e453191bd5d606e09b6623.jpg\"\u003e\n\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Default Title","offer_id":43370970480729,"sku":"FMF-PS-260-80345","price":120.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/6d0f95cb-ddaf-4d83-b8e9-40f82fb36a80.png?v=1781285718"},{"product_id":"us-400s-ultrasonic-edge-sensor-web-alignment","title":"US-400S Ultrasonic Edge Sensor for Web Alignment, DC12V","description":"\u003ch2\u003eUS-400S ultrasonic edge sensor for web alignment\u003c\/h2\u003e\n\u003cp\u003eThe US-400S is an ultrasonic edge sensor for web alignment, edge correction and EPC\/LPC guiding systems. It detects the edge position of rolled material with ultrasonic sensing, so transparent material is easier to handle than with photoelectric sensing.\u003c\/p\u003e\n\n\u003ch3\u003eBest-fit use\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEdge tracking for rolled web material.\u003c\/li\u003e\n  \u003cli\u003eWeb alignment and edge correction on EPC\/LPC guide systems.\u003c\/li\u003e\n  \u003cli\u003eNon-breathable materials such as plastic film, transparent film and paper.\u003c\/li\u003e\n  \u003cli\u003eApplications that need 0-5V analog output and dual-channel switch output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUltrasonic edge detection:\u003c\/strong\u003e Detects rolled material edge position without relying on material transparency.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDC12V power input:\u003c\/strong\u003e Designed for DC12V power. Do not connect AC220V.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e0-5V analog output:\u003c\/strong\u003e Includes analog output for edge-position signal use.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual switch output:\u003c\/strong\u003e Supports dual-channel switch output; the product label shows NPN x2 digital output.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6 mm detection range:\u003c\/strong\u003e Detection range is 6 mm (+\/-3.0 mm).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e0.05 mm detection accuracy:\u003c\/strong\u003e Built for precise web edge tracking.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePosition indicator:\u003c\/strong\u003e Built-in position indicator and setup button for adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eUS-400S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eUltrasonic edge sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eTracking method\u003c\/th\u003e\n\u003ctd\u003eEdge tracking\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower input\u003c\/th\u003e\n\u003ctd\u003eDC 12V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eAnalog output\u003c\/th\u003e\n\u003ctd\u003e0-5V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eDigital output\u003c\/th\u003e\n\u003ctd\u003eDual-channel switch signal \/ NPN x2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eDetection range\u003c\/th\u003e\n\u003ctd\u003e6 mm (+\/-3.0 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eDetection accuracy\u003c\/th\u003e\n\u003ctd\u003e+\/-0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eUltrasonic transmission\u003c\/th\u003e\n\u003ctd\u003e200K\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan rate\u003c\/th\u003e\n\u003ctd\u003e1 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eIP54\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWiring reference\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eAOUT\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003e+12V\u003c\/th\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eDOUT2\u003c\/th\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eDOUT1\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eGND\u003c\/th\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOrdering notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eUse DC12V power only. Do not connect AC220V.\u003c\/li\u003e\n  \u003cli\u003eThis sensor is intended for non-breathable materials such as plastic film, transparent film and paper.\u003c\/li\u003e\n  \u003cli\u003eFor breathable materials such as fabrics or non-wovens, contact us before ordering.\u003c\/li\u003e\n  \u003cli\u003eFor system compatibility or connector details, contact us before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat materials is the US-400S edge sensor best for?\u003c\/h4\u003e\n\u003cp\u003eIt is best for non-breathable web materials such as plastic film, transparent film and paper.\u003c\/p\u003e\n\n\u003ch4\u003eCan it work with transparent film?\u003c\/h4\u003e\n\u003cp\u003eYes. The ultrasonic sensing method is not affected by material transparency in the same way as a photoelectric sensor.\u003c\/p\u003e\n\n\u003ch4\u003eWhat output signals does it provide?\u003c\/h4\u003e\n\u003cp\u003eIt provides 0-5V analog output and dual-channel switch output. The product label also shows NPN x2 digital output.\u003c\/p\u003e\n\n\u003ch4\u003eWhat is the detection range and accuracy?\u003c\/h4\u003e\n\u003cp\u003eThe detection range is 6 mm (+\/-3.0 mm), and the detection accuracy is +\/-0.05 mm.\u003c\/p\u003e\n\n\u003ch4\u003eCan I use it with AC220V?\u003c\/h4\u003e\n\u003cp\u003eNo. Use DC12V power only. Do not connect AC220V.\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Default Title","offer_id":43370970710105,"sku":"FMF-US-400S-78649","price":73.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sc3664d99447b40089c15064be3f8d0618.webp?v=1780391217"},{"product_id":"ps-400s-photoelectric-edge-sensor-cable-epc-lpc-web-guide","title":"PS-400S Photoelectric Edge Sensor with Cable for EPC\/LPC Web Guide","description":"\u003ch2\u003ePS-400S photoelectric edge sensor for web guiding\u003c\/h2\u003e\n\u003cp\u003eThe PS-400S is a photoelectric slot edge sensor supplied with a cable for EPC and LPC web guide systems. It is used to detect the edge position of roll or web materials so the guiding controller can keep the material aligned during converting, packaging, printing, laminating, slitting, or similar web-handling work.\u003c\/p\u003e\n\u003ch2\u003eKey details\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003ePS-400S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSensor type\u003c\/th\u003e\n\u003ctd\u003ePhotoelectric slot edge sensor \/ through-beam edge sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eEdge tracking for EPC \/ LPC web guide systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIncluded item\u003c\/th\u003e\n\u003ctd\u003e1 pc PS-400S sensor with cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower input\u003c\/th\u003e\n\u003ctd\u003eDC 10-30V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSignal output\u003c\/th\u003e\n\u003ctd\u003eAnalog 0-5V and NPN on\/off signal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDetection range\u003c\/th\u003e\n\u003ctd\u003e8 mm, +\/-4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDetection precision\u003c\/th\u003e\n\u003ctd\u003e+\/-0.02 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection level\u003c\/th\u003e\n\u003ctd\u003eIP54\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHousing\u003c\/th\u003e\n\u003ctd\u003eAluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhere it fits\u003c\/h2\u003e\n\u003cp\u003eThis sensor is intended for edge-position detection in web guiding and web alignment systems. It is a practical replacement or spare sensor when the machine requires a PS-400S photoelectric edge sensor with cable for EPC\/LPC correction control.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm that your controller or machine accepts the PS-400S signal type and wiring.\u003c\/li\u003e\n\u003cli\u003eCheck the working material and edge-tracking method against your existing web guide setup.\u003c\/li\u003e\n\u003cli\u003eCompare the connector, cable routing, and mounting position with the sensor currently installed on your machine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs this the US-400S ultrasonic sensor?\u003c\/h3\u003e\n\u003cp\u003eNo. This product is for the PS-400S photoelectric edge sensor. If your application needs an ultrasonic edge sensor, check the model on your current sensor before ordering.\u003c\/p\u003e\n\u003ch3\u003eCan it be used for EPC and LPC systems?\u003c\/h3\u003e\n\u003cp\u003eYes. The PS-400S is listed here for EPC \/ LPC web guide systems, where the sensor detects the material edge for correction control.\u003c\/p\u003e\n\u003ch3\u003eWhat is included?\u003c\/h3\u003e\n\u003cp\u003ePackage includes 1 pc PS-400S photoelectric slot sensor with cable.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"PS-400S photoelectric edge sensor with cable for EPC LPC web guide system detail image 1\" decoding=\"async\" fetchpriority=\"low\" loading=\"lazy\" slate-data-type=\"image\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sd3e7e97c27e2441588bb89cb9f80c6bcz.jpg\" style=\"max-width: 100%; height: auto;\"\u003e\u003cimg alt=\"PS-400S photoelectric slot edge sensor for web guide system detail image 2\" decoding=\"async\" fetchpriority=\"low\" loading=\"lazy\" slate-data-type=\"image\" src=\"https:\/\/ae01.alicdn.com\/kf\/S01979b7825ef40969af2c7c8f727e4aeU.jpg\" style=\"max-width: 100%; height: auto;\"\u003e\u003cimg alt=\"PS-400S edge tracking photoelectric sensor cable connection detail image 3\" decoding=\"async\" fetchpriority=\"low\" loading=\"lazy\" slate-data-type=\"image\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sa4af2043d62c48c391d01b87350bec5a4.jpg\" style=\"max-width: 100%; height: auto;\"\u003e\u003cimg alt=\"PS-400S photoelectric edge sensor dimensions and mounting detail image 4\" decoding=\"async\" fetchpriority=\"low\" loading=\"lazy\" slate-data-type=\"image\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sd0a5c83e922642bdbcb4cae6564c9844G.jpg\" style=\"max-width: 100%; height: auto;\"\u003e\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Default Title","offer_id":43370970972249,"sku":"FMF-PS-400S-40793","price":83.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sd3e7e97c27e2441588bb89cb9f80c6bcz.webp?v=1780391225"},{"product_id":"ktc838a-automatic-tension-controller-radius-taper-tension-control-2pcs-ts200-50-tension-detector","title":"KTC838A ตัวควบคุมแรงดึงอัตโนมัติพร้อมหัวตรวจจับ TS200-50","description":"\u003csection\u003e\n\u003ch2\u003eภาพรวมผลิตภัณฑ์\u003c\/h2\u003e\n\u003cp\u003eตัวควบคุมแรงดึงอัตโนมัติ KTC838A เป็นตัวควบคุมแรงดึงแบบดิจิทัลสำหรับอุปกรณ์ที่ใช้ม้วนวัสดุ ชุดอุปกรณ์นี้ประกอบด้วยตัวควบคุม KTC838A หนึ่งตัว หัวตรวจจับแรงดึง TS200-50 50kg สองตัว และสายเคเบิลสำหรับสร้างระบบควบคุมแรงดึงร่วมกับเบรกผงแม่เหล็ก คลัตช์ผงแม่เหล็ก อินเวอร์เตอร์ เซอร์โวมอเตอร์ หรือแอคชูเอเตอร์อื่นๆ ที่เข้ากันได้\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eสิ่งที่รวมในแพ็คเกจ\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 ชิ้น ตัวควบคุมแรงดึงอัตโนมัติ KTC838A\u003c\/li\u003e\n\u003cli\u003e2 ชิ้น หัวตรวจจับแรงดึง TS200-50 50kg\u003c\/li\u003e\n\u003cli\u003eสายเคเบิล\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eรายละเอียดสำคัญ\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eรองรับการควบคุมแรงดึงแบบวงปิดด้วยการป้อนกลับจากหัวตรวจจับแรงดึง\u003c\/li\u003e\n\u003cli\u003eรองรับการควบคุมแบบวงเปิดโดยการคำนวณรัศมีผ่านสวิตช์ proximity หรืออินพุตเอนโค้ดเดอร์\u003c\/li\u003e\n\u003cli\u003eมีฟังก์ชันควบคุมแรงดึงตามรัศมีและแรงดึงแบบเทเปอร์สำหรับกระบวนการม้วนและคลายม้วน\u003c\/li\u003e\n\u003cli\u003eใช้จอแสดงผล LCD แบบกราฟิก รองรับการแสดงผลทั้งภาษาไทยและภาษาอังกฤษ\u003c\/li\u003e\n\u003cli\u003eรองรับการสลับระหว่างโหมดอัตโนมัติ\/แมนนวล การสลับแกนคู่ และการชดเชยการเร่ง\/ลดความเร็ว\u003c\/li\u003e\n\u003cli\u003eรองรับการสื่อสาร Modbus มาตรฐานสำหรับการเชื่อมต่อกับ PLC หรือหน้าจอสัมผัสเมื่อเดินสายและกำหนดค่าสำหรับการใช้งานนั้น\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eข้อมูลจำเพาะทางเทคนิค\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eรายการ\u003c\/th\u003e\n\u003cth\u003eข้อมูลจำเพาะ\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eรุ่นตัวควบคุม\u003c\/td\u003e\n\u003ctd\u003eKTC838A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eหัวตรวจจับที่รวมในชุด\u003c\/td\u003e\n\u003ctd\u003e2 ชิ้น หัวตรวจจับแรงดึง TS200-50 50kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eแรงดันไฟฟ้าขาเข้า\u003c\/td\u003e\n\u003ctd\u003e100-264VAC, 50\/60Hz, 100W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eกำลังไฟฟ้าขาออกสำหรับหัวตรวจจับ\u003c\/td\u003e\n\u003ctd\u003eDC 10V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eอินพุตหัวตรวจจับ\u003c\/td\u003e\n\u003ctd\u003eอินพุตสัญญาณจากหัวตรวจจับแรงดึงสองตัว\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eเอาต์พุตควบคุม\u003c\/td\u003e\n\u003ctd\u003eDC 0-10V สำหรับควบคุมอินเวอร์เตอร์ เซอร์โว แอมพลิฟายเออร์ หรือแอคชูเอเตอร์ที่เข้ากันได้\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eเอาต์พุตเบรก\/คลัตช์\u003c\/td\u003e\n\u003ctd\u003eDC 0-24V, น้อยกว่า 4A สำหรับควบคุมเบรกผงแม่เหล็กหรือคลัตช์ผงแม่เหล็กที่เข้ากันได้\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eเอาต์พุตแอนะล็อก\u003c\/td\u003e\n\u003ctd\u003eเอาต์พุต 4-20mA สำหรับควบคุมไดรฟ์หรือแอคชูเอเตอร์ที่เข้ากันได้\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eอุณหภูมิแวดล้อม\u003c\/td\u003e\n\u003ctd\u003e-10 ถึง 40 องศาเซลเซียส\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eความชื้น\u003c\/td\u003e\n\u003ctd\u003e35-85% RH ไม่มีการควบแน่น\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eการสื่อสาร\u003c\/td\u003e\n\u003ctd\u003eโปรโตคอลการสื่อสาร Modbus มาตรฐาน\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eหมายเหตุการใช้งาน\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eใช้หัวตรวจจับ TS200-50 เมื่อช่วงแรงดึงของวัสดุสอดคล้องกับการกำหนดค่าหัวตรวจจับ 50kg\u003c\/li\u003e\n\u003cli\u003eใช้การควบคุมแบบวงปิดเมื่อต้องการการป้อนกลับแรงดึงโดยตรงจากเซ็นเซอร์หรือโหลดเซลล์\u003c\/li\u003e\n\u003cli\u003eใช้การควบคุมแรงดึงตามรัศมีหรือแบบเทเปอร์เมื่อเครื่องจักรต้องการชดเชยแรงดึงเมื่อเส้นผ่านศูนย์กลางม้วนเปลี่ยนไป\u003c\/li\u003e\n\u003cli\u003eยืนยันเอาต์พุตแอคชูเอเตอร์ที่ต้องการก่อนสั่งซื้อ: เบรกผงแม่เหล็กหรือคลัตช์ อินเวอร์เตอร์ เซอร์โวมอเตอร์ แอมพลิฟายเออร์ หรืออุปกรณ์ควบคุมอื่นๆ ที่เข้ากันได้\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eคำถามที่พบบ่อย\u003c\/h2\u003e\n\u003ch3\u003eรายการ KTC838A นี้รวมอะไรบ้าง?\u003c\/h3\u003e\n\u003cp\u003eรายการนี้รวมตัวควบคุมแรงดึงอัตโนมัติ KTC838A หนึ่งตัว หัวตรวจจับแรงดึง TS200-50 50kg สองตัว และสายเคเบิล\u003c\/p\u003e\n\u003ch3\u003eสามารถใช้สำหรับการควบคุมแรงดึงทั้งแบบวงปิดและวงเปิดได้หรือไม่?\u003c\/h3\u003e\n\u003cp\u003eได้ ตัวควบคุมสามารถทำงานร่วมกับการป้อนกลับจากหัวตรวจจับแรงดึงสำหรับการควบคุมแบบวงปิด หรือคำนวณแรงดึงผ่านสวิตช์ proximity หรือเอนโค้ดเดอร์สำหรับการควบคุมรัศมีแบบวงเปิดเมื่อเครื่องจักรได้รับการกำหนดค่าในลักษณะนั้น\u003c\/p\u003e\n\u003ch3\u003eควรยืนยันอะไรก่อนสั่งซื้อ?\u003c\/h3\u003e\n\u003cp\u003eยืนยันช่วงแรงดึงของวัสดุ ความจุของหัวตรวจจับ กระแสเบรกหรือคลัตช์ สัญญาณควบคุมแอคชูเอเตอร์ วิธีการเดินสาย และว่าเครื่องจักรของคุณต้องการการควบคุมแรงดึงแบบรัศมี เทเปอร์ วงปิด หรือวงเปิด\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Default Title","offer_id":43370971758681,"sku":"FMF-KTC838A-99545","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S249b6666bd234110b98d5fe694fd5356J.webp?v=1780391242"},{"product_id":"epc-a10-web-guiding-system-kit-ps260-pd204l150t","title":"EPC-A10 Web Guiding System Kit with PS260 Color Mark Sensor PD-204L150T Actuator","description":"\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThe EPC-A10 web guiding system kit is built for edge and line position control. The kit combines an EPC-A10 controller, PS260-H RGB color mark sensor, PD204L150T servo linear actuator, 24V power supply, connection cables, and mounting hardware.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eEPC-A10 servo edge position control system for edge-following, line-following, and center-alignment operation modes.\u003c\/li\u003e\n  \u003cli\u003eController supply: DC24V; controller power label: 100W.\u003c\/li\u003e\n  \u003cli\u003eRear controller interfaces include Power DC24V, Servo Motor, Detector, EX Port, MC Port, RS485, 0-10V, and OUT terminals.\u003c\/li\u003e\n  \u003cli\u003ePS260-H RGB color mark sensor with auto tuning and DC10-30V sensor supply labeling.\u003c\/li\u003e\n  \u003cli\u003ePD204L150T precision linear actuator with 150 mm travel, 200 kg thrust, 40 mm\/s speed, and linear position encoder labeling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eKit model\u003c\/th\u003e\n\u003ctd\u003eEPC-A10 with PS260-H sensor and PD204L150T actuator\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eController model\u003c\/th\u003e\n\u003ctd\u003eEPC-A10 edge\/line position controller\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eController supply\u003c\/th\u003e\n\u003ctd\u003eDC24V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eController power\u003c\/th\u003e\n\u003ctd\u003e100W\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOperation modes\u003c\/th\u003e\n\u003ctd\u003eEdge-following, line-following, center-alignment\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eController ports\u003c\/th\u003e\n\u003ctd\u003ePower DC24V, Servo Motor, Detector, EX Port\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTerminal signals\u003c\/th\u003e\n\u003ctd\u003eMC Port, RS485, 0-10V, OUT\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSensor model\u003c\/th\u003e\n\u003ctd\u003ePS260-H \/ PS260 RGB emission color mark sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSensor supply label\u003c\/th\u003e\n\u003ctd\u003eDC10-30V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eActuator model\u003c\/th\u003e\n\u003ctd\u003ePD204L150T\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eActuator travel\u003c\/th\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eActuator thrust\u003c\/th\u003e\n\u003ctd\u003e200 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eActuator speed\u003c\/th\u003e\n\u003ctd\u003e40 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePosition feedback\u003c\/th\u003e\n\u003ctd\u003eLinear position encoder\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct weight\u003c\/th\u003e\n\u003ctd\u003e12 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eEPC-A10 controller\u003c\/li\u003e\n  \u003cli\u003ePS260-H RGB color mark sensor with cable\u003c\/li\u003e\n  \u003cli\u003ePD204L150T servo linear actuator with cable\u003c\/li\u003e\n  \u003cli\u003e24V power supply\u003c\/li\u003e\n  \u003cli\u003eMounting fixture and connection hardware\u003c\/li\u003e\n  \u003cli\u003eConnection cables\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eManuals and Drawings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/epc-a10-edge-line-position-controller-manual.pdf?v=1782826099\" target=\"_blank\" rel=\"noopener\"\u003eEPC-A10 edge line position controller manual PDF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/pd204l150-servo-linear-actuator-dimension-drawing.pdf?v=1782826100\" target=\"_blank\" rel=\"noopener\"\u003ePD204L150 servo linear actuator dimension drawing PDF\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat actuator is included?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a PD204L150T servo linear actuator with 150 mm travel, 200 kg thrust, and 40 mm\/s speed.\u003c\/p\u003e\n\u003ch3\u003eWhat sensor is included?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a PS260-H RGB color mark sensor for color mark detection in the web guiding system.\u003c\/p\u003e\n\u003ch3\u003eWhat controller supply voltage is required?\u003c\/h3\u003e\n\u003cp\u003eThe EPC-A10 controller is labeled for DC24V supply.\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Default Title","offer_id":43486060904537,"sku":"EPC-A10-PS260-PD204L150T-KIT","price":695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/epc-a10-web-guiding-system-kit-powered.jpg?v=1782826288"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/collections\/988e9e0b-30a6-4439-b3a2-1ceacd3feaa7.png?v=1779804820","url":"https:\/\/fmfpack.com\/th-th\/collections\/web-tension-guiding-control.oembed","provider":"FMF Supply","version":"1.0","type":"link"}