{"title":"Kontrola napätia a vedenia webu","description":"\u003cp\u003eSystémy riadenia napätia a vedenia pásu pre linky na balenie, tlač, spracovanie a laminovanie v režime roll-to-roll. Preskúmajte regulátory napätia, vodiace zariadenia pásu, senzory, pohony, magnetické brzdy, spojky a servoriadiace komponenty pre stabilné spracovanie pásu a presné zarovnanie.\u003c\/p\u003e","products":[{"product_id":"ccd-sensor-for-epc-a12-web-guiding-system-epc-lpc-system-edge-line-position-controller","title":"CCD snímač pre EPC-A12 systém vedenia pásu – sledovanie okraja\/linie","description":"\u003csection\u003e\n\u003ch2\u003eCCD snímač pre EPC-A12 vedenie pásu\u003c\/h2\u003e\n\u003cp\u003eTento CCD\/HCCD snímač sa používa so systémom vedenia pásu EPC-A12 na sledovanie polohy okraja a linie. Je určený pre aplikácie, kde snímač potrebuje identifikovať okraj pohybujúceho sa pásu, kontrastný okraj, líniu alebo vytlačený vzor predtým, ako vodiaci systém koriguje polohu materiálu.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003ePodrobnosti o produkte\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTyp produktu: snímač pre systémy vedenia pásu a riadenia polohy okraja\/linie.\u003c\/li\u003e\n\u003cli\u003eReferenčný systém: systém vedenia pásu EPC-A12, použitie na riadenie okraja (EPC) a linie (LPC).\u003c\/li\u003e\n\u003cli\u003ePopis snímača: farebná lineárna kamera HCCD \/ CCD snímač.\u003c\/li\u003e\n\u003cli\u003eCiele sledovania: okraje materiálu, kontrastné okraje, línie a vzory po kalibrácii cieľa.\u003c\/li\u003e\n\u003cli\u003eReferenčné SKU: FMF-EPC-A12-76601.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003ePoznámky k použitiu a výberu\u003c\/h2\u003e\n\u003cp\u003eRôzne materiály pásu a tlačené ciele môžu vyžadovať odlišné nastavenie snímača. Pred objednaním porovnajte fotografie produktu a SKU so snímačom použitým vo vašom systéme EPC-A12 alebo EPC\/LPC a overte, či cieľ, ktorý chcete sledovať, je možné na snímači kalibrovať.\u003c\/p\u003e\n\u003cp\u003eTento produkt je určený pre snímač zobrazený na tejto stránke. Riadiaca jednotka, pohon, napätie, kábel a požiadavky na celý systém by mali byť overené podľa dokumentácie vášho existujúceho stroja alebo projektu pred nákupom.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eČasto kladené otázky\u003c\/h2\u003e\n\u003ch3\u003eČo tento CCD snímač sleduje?\u003c\/h3\u003e\n\u003cp\u003ePoznámky k produktu uvádzajú sledovanie okrajov materiálu, kontrastných okrajov, línií a vzorov po kalibrácii cieľa.\u003c\/p\u003e\n\u003ch3\u003eJe tento snímač určený pre systémy vedenia pásu EPC a LPC?\u003c\/h3\u003e\n\u003cp\u003eÁno. Názov a poznámky k produktu spájajú tento snímač so systémom vedenia pásu EPC-A12 a použitím na riadenie polohy okraja (EPC) alebo linie (LPC).\u003c\/p\u003e\n\u003ch3\u003eČo by som mal overiť pred objednaním?\u003c\/h3\u003e\n\u003cp\u003eOverte referenciu systému EPC-A12, vzhľad snímača na obrázkoch produktu, SKU a či je váš okraj materiálu, línia alebo vzor vhodný na kalibráciu.\u003c\/p\u003e\n\u003ch3\u003ePotvrdzuje táto stránka podrobnosti o riadiacej jednotke, pohone, napätí alebo certifikácii?\u003c\/h3\u003e\n\u003cp\u003eNie. Tieto podrobnosti nie sú súčasťou tohto záznamu snímača, preto by mali byť overené z dokumentácie vášho systému pred nákupom.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Predvolený názov","offer_id":43370941808729,"sku":"FMF-EPC-A12-76601","price":576.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sf8382637a9aa4858b54a6ad302f57f495.webp?v=1780390742"},{"product_id":"pg350a-servo-web-guiding-system-epc-lpc-edge-line-position-controller-with-ultrasonic-sensor-all-in-one-automatic-web-guide","title":"PG350A All-in-One Servo Web Guiding System s ultrazvukovým senzorom","description":"\u003csection\u003e\n\u003ch2\u003ePG350A All-in-One Servo Web Guiding System\u003c\/h2\u003e\n\u003cp\u003eSystém PG350A je integrovaný servonavádzací systém na riadenie polohy okraja a línie (EPC\/LPC) pre úzke pásové materiály. Riadiaca jednotka, menič a detektor sú zabudované v jednom kompaktnom navádzacom zariadení, čo zjednodušuje inštaláciu a nastavenie.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eHlavné funkcie\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatické navádzanie pásu na korekciu polohy okraja a línie.\u003c\/li\u003e\n\u003cli\u003eIntegrovaná riadiaca jednotka, menič a detektor pre rýchlejšiu inštaláciu a ladenie.\u003c\/li\u003e\n\u003cli\u003eKonfigurácia ultrazvukového senzora na detekciu polohy pásu.\u003c\/li\u003e\n\u003cli\u003ePohon bezkartáčovým DC servomotorom, označený ako bezúdržbový.\u003c\/li\u003e\n\u003cli\u003ePresný guľôčkový skrutkový mechanizmus na presné polohovanie.\u003c\/li\u003e\n\u003cli\u003eVeľký rozsah navádzania pre aplikácie manipulácie s materiálom z kotúča na kotúč.\u003c\/li\u003e\n\u003cli\u003eDĺžka a šírka valca môžu byť vyrobené na mieru podľa požiadaviek aplikácie.\u003c\/li\u003e\n\u003cli\u003eVoliteľný prípravok na rezanie: manuálny alebo pneumatický.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eŠpecifikácie\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003ePG350A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTyp systému\u003c\/th\u003e\n\u003ctd\u003eAll-in-one servonavádzací systém\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRežim riadenia\u003c\/th\u003e\n\u003ctd\u003eRiadenie polohy okraja a línie EPC\/LPC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNapájanie\u003c\/th\u003e\n\u003ctd\u003eAC220V \/ 110V, 80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePriemer valca\u003c\/th\u003e\n\u003ctd\u003e60 mm \/ na mieru\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDĺžka valca\u003c\/th\u003e\n\u003ctd\u003e350 mm \/ na mieru\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eŠírka valca\u003c\/th\u003e\n\u003ctd\u003e260 mm \/ na mieru\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaximálna rýchlosť\u003c\/th\u003e\n\u003ctd\u003e40 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProstredie\u003c\/th\u003e\n\u003ctd\u003e-10 až 60°C, do RH 90%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eFMF-PG350A-74905\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003ePoznámky k výberu\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePoužite tento produkt pri výbere all-in-one automatického navádzania pásu PG350A na navádzanie úzkych pásov.\u003c\/li\u003e\n\u003cli\u003ePred objednaním potvrďte požadovanú dĺžku valca, šírku valca, dráhu pásu, napätie a montážny priestor.\u003c\/li\u003e\n\u003cli\u003eAk vaša aplikácia vyžaduje špecifický rozsah šírky pásu, uhol navádzania, maximálne napnutie, káblovú súpravu alebo typ prípravku, potvrďte tieto podrobnosti pred nákupom.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eNa čo slúži PG350A?\u003c\/h3\u003e\n\u003cp\u003ePoužíva sa na navádzanie úzkych pásových materiálov korekciou polohy okraja alebo línie počas manipulácie z kotúča na kotúč a konverzných procesov.\u003c\/p\u003e\n\u003ch3\u003eČo je integrované v systéme?\u003c\/h3\u003e\n\u003cp\u003eTento produkt obsahuje integrovanú riadiacu jednotku, menič a detektor, s bezkartáčovým DC servomotorom a presným guľôčkovým skrutkovým mechanizmom.\u003c\/p\u003e\n\u003ch3\u003eObsahuje tento produkt ultrazvukové snímanie?\u003c\/h3\u003e\n\u003cp\u003eÁno. Názov produktu identifikuje tento navádzací systém PG350A s ultrazvukovým senzorom.\u003c\/p\u003e\n\u003ch3\u003eČo by som mal potvrdiť pred objednaním?\u003c\/h3\u003e\n\u003cp\u003ePotvrďte napätie, rozmery valca, dráhu pásu, montážny priestor a prípadné požiadavky na valec na mieru alebo prípravok na rezanie.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Predvolený názov","offer_id":43370941907033,"sku":"FMF-PG350A-74905","price":1031.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S7463c6450336416aa1f0ab968c990b03e.webp?v=1780390744"},{"product_id":"pg450a-all-in-one-servo-web-guiding-system-epc-lpc-edge-line-position-controller-with-ultrasonic-sensor","title":"PG450A All-in-One Servo Web Guide with Ultrasonic Sensor","description":"\u003csection\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe PG450A is an all-in-one servo web guiding system for EPC\/LPC edge and line position control on narrow web materials. It integrates the controller, driver, detector, and servo guide structure in a compact unit, with an ultrasonic sensor configuration for web edge detection.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eKey Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: PG-450A \/ PG450A\u003c\/li\u003e\n\u003cli\u003eApplication: narrow web guiding for label printing, packaging, and non-woven material processes\u003c\/li\u003e\n\u003cli\u003eIntegrated controller, driver, detector, and guide structure for easier installation and debugging\u003c\/li\u003e\n\u003cli\u003eBrushless DC servo motor drive for low-maintenance operation\u003c\/li\u003e\n\u003cli\u003ePrecision ball screw mechanism for accurate positioning\u003c\/li\u003e\n\u003cli\u003eAvailable in two installation-direction options; select the direction that matches the sensor side and material feed direction shown in the product images\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePG-450A \/ PG450A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower input\u003c\/td\u003e\n\u003ctd\u003eAC220V \/ 80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive\u003c\/td\u003e\n\u003ctd\u003eBrushless DC servo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller length\u003c\/td\u003e\n\u003ctd\u003e450 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller diameter\u003c\/td\u003e\n\u003ctd\u003e60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller width\u003c\/td\u003e\n\u003ctd\u003e310 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase length\u003c\/td\u003e\n\u003ctd\u003e460 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeb guide range\u003c\/td\u003e\n\u003ctd\u003e+\/-17 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. tension\u003c\/td\u003e\n\u003ctd\u003e500 N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. driving speed\u003c\/td\u003e\n\u003ctd\u003e40 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironment\u003c\/td\u003e\n\u003ctd\u003e-10 to 60 degree C, below RH 90%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eInstallation Direction Options\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOption 1\u003c\/td\u003e\n\u003ctd\u003eLeft-side sensor installation \/ right-to-left material feed as shown in the product image\u003c\/td\u003e\n\u003ctd\u003eFMF-PG450A-73209-OPTION-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOption 2\u003c\/td\u003e\n\u003ctd\u003eAlternate installation direction shown in the product images\u003c\/td\u003e\n\u003ctd\u003eFMF-PG450A-73209-OPTION-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSelection Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse PG450A when the 450 mm roller length, 310 mm roller width, and 500 N maximum tension match the web material and machine layout.\u003c\/li\u003e\n\u003cli\u003eConfirm whether your line needs EPC edge control, LPC line control, or both before ordering.\u003c\/li\u003e\n\u003cli\u003eConfirm installation side, material feed direction, voltage, web width, roller surface, and available mounting space before selecting Option 1 or Option 2.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between Option 1 and Option 2?\u003c\/h3\u003e\n\u003cp\u003eThey are installation-direction choices. Match the option to the sensor side and material feed direction shown in the product images before ordering.\u003c\/p\u003e\n\u003ch3\u003eWhat materials is this system intended for?\u003c\/h3\u003e\n\u003cp\u003eIt is intended for narrow web material guiding, including label printing, packaging, and non-woven material applications when the machine requirements match the listed specifications.\u003c\/p\u003e\n\u003ch3\u003eCan roller dimensions be customized?\u003c\/h3\u003e\n\u003cp\u003eThe PG series supports custom roller length, width, and surface treatment. Confirm the required dimensions and roller surface before ordering.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Option 1","offer_id":43370942005337,"sku":"FMF-PG450A-73209-OPTION-1","price":1075.73,"currency_code":"USD","in_stock":true},{"title":"Option 2","offer_id":43370942038105,"sku":"FMF-PG450A-73209-OPTION-2","price":1075.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sa940b38334bc4c8588b60bfa7537df81V.webp?v=1780390749"},{"product_id":"pg400a-servo-web-guiding-system-400mm-roller-epc-lpc-edge-position-controller-with-ultrasonic-sensor-for-web-control","title":"PG400A Servo Web Guiding System 400mm Roller with Ultrasonic Sensor","description":"\u003csection\u003e\n\u003ch2\u003ePG400A Servo Web Guiding System with 400mm Roller\u003c\/h2\u003e\n\u003cp\u003eThe PG400A is an all-in-one servo web guiding system for EPC\/LPC edge and line position control. It is listed with a 400mm roller and ultrasonic sensor for web control applications where narrow web materials need automatic guiding and correction.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eMain Functions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll-in-one web guide controller for accurate guiding of narrow web materials.\u003c\/li\u003e\n\u003cli\u003eIntegrated controller, driver, and detector to simplify installation and debugging.\u003c\/li\u003e\n\u003cli\u003eUltrasonic sensor configuration for web position detection.\u003c\/li\u003e\n\u003cli\u003eBrushless DC servo motor drive, listed as maintenance-free.\u003c\/li\u003e\n\u003cli\u003ePrecision ball screw mechanism for accurate positioning.\u003c\/li\u003e\n\u003cli\u003eLarge guiding travel for web control applications.\u003c\/li\u003e\n\u003cli\u003eRoller length and width can be custom-made based on application requirements.\u003c\/li\u003e\n\u003cli\u003eOptional cutting-station fixture: manual or pneumatic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eInstallation Direction Options\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eOption\u003c\/th\u003e\n\u003cth scope=\"col\"\u003edirection note\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSKU\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOption 1\u003c\/td\u003e\n\u003ctd\u003eLeft-side sensor installation; material feeding direction shown as right to left\u003c\/td\u003e\n\u003ctd\u003eFMF-PG400A-30809-OPTION-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOption 2\u003c\/td\u003e\n\u003ctd\u003eMaterial feeding direction shown as left to right\u003c\/td\u003e\n\u003ctd\u003eFMF-PG400A-30809-OPTION-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eDetails\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003ePG400A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSystem type\u003c\/th\u003e\n\u003ctd\u003eAll-in-one servo web guiding system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl mode\u003c\/th\u003e\n\u003ctd\u003eEPC\/LPC edge and line position control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSensor wording\u003c\/th\u003e\n\u003ctd\u003eUltrasonic sensor for web control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRoller\u003c\/th\u003e\n\u003ctd\u003e400mm roller listed in product title\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVariant SKUs\u003c\/th\u003e\n\u003ctd\u003eFMF-PG400A-30809-OPTION-1 \/ FMF-PG400A-30809-OPTION-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSelection Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSelect the installation direction that matches the sensor side and material feeding direction shown in your machine layout.\u003c\/li\u003e\n\u003cli\u003eConfirm the roller size, web path, mounting space, fixture style, and any custom roller requirements before ordering.\u003c\/li\u003e\n\u003cli\u003eIf your application requires a specific voltage, web width range, guide angle, maximum tension, cable set, or sensor accuracy, confirm those details before purchase because they are not in the current listing data.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is the PG400A used for?\u003c\/h3\u003e\n\u003cp\u003eIt is used for automatic web guiding, helping correct edge or line position in web control applications.\u003c\/p\u003e\n\u003ch3\u003eWhat is integrated in the PG400A system?\u003c\/h3\u003e\n\u003cp\u003eThis product is designed an integrated controller, driver, and detector with brushless DC servo motor driving and a precision ball screw mechanism.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between Option 1 and Option 2?\u003c\/h3\u003e\n\u003cp\u003eThe options relate to installation and material feeding direction. Option 1 is designed for left-side sensor installation with material feeding shown as right to left; Option 2 is listed with material feeding shown as left to right.\u003c\/p\u003e\n\u003ch3\u003eWhat should I confirm before ordering?\u003c\/h3\u003e\n\u003cp\u003eConfirm installation direction, roller size, web path, mounting space, and any required custom roller or fixture details.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Option 1","offer_id":43370945019993,"sku":"FMF-PG400A-30809-OPTION-1","price":1053.62,"currency_code":"USD","in_stock":true},{"title":"Option 2","offer_id":43370945052761,"sku":"FMF-PG400A-30809-OPTION-2","price":1053.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sd41ad234720f44d782dc3882fdd9ba05b.webp?v=1780390797"},{"product_id":"kt5w-2n1116-contrast-sensors-color-mark-sensor","title":"KT5W-2N1116 Kontrastný snímač na farebné značky s káblom","description":"\u003csection\u003e\n\u003ch2\u003eKT5W-2N1116 Kontrastný snímač\u003c\/h2\u003e\n\u003cp\u003eSnímač KT5W-2N1116 je kontrastný snímač na farebné značky určený na detekciu tlačených značiek, registračných značiek a zmien kontrastu v priemyselnej automatizácii a baliacich strojoch. Súčasťou balenia je 1 ks snímač KT5W-2N1116 a 1 ks kábel.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eKľúčové údaje\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: KT5W-2N1116.\u003c\/li\u003e\n\u003cli\u003eTyp produktu: kontrastný snímač \/ snímač farebných značiek.\u003c\/li\u003e\n\u003cli\u003eSKU: FMF-KT5W-2N1116-87865.\u003c\/li\u003e\n\u003cli\u003eObsah balenia: 1 ks snímač KT5W-2N1116 + 1 ks kábel.\u003c\/li\u003e\n\u003cli\u003ePoužitie: detekcia značiek, detekcia kontrastu a aplikácie registračných snímačov, kde stroj potrebuje rozlíšiť značku od pozadia.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eTechnické parametre\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"text-align: left;\"\u003ePoložka\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eŠpecifikácia\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eZdroj svetla\u003c\/td\u003e\n\u003ctd\u003eRGB LED.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVlnové dĺžky\u003c\/td\u003e\n\u003ctd\u003e470 nm, 525 nm a 640 nm.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSnímacia vzdialenosť\u003c\/td\u003e\n\u003ctd\u003eAž 10 mm od prednej hrany šošovky.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVeľkosť svetelného bodu\u003c\/td\u003e\n\u003ctd\u003e1.2 mm x 4.2 mm.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNastavenie\u003c\/td\u003e\n\u003ctd\u003eTlačidlo Teach-in; statické učenie 2-point.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNapájacie napätie\u003c\/td\u003e\n\u003ctd\u003e10 V DC až 30 V DC.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpínací výstup\u003c\/td\u003e\n\u003ctd\u003eNPN.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpínacia frekvencia \/ doba odozvy\u003c\/td\u003e\n\u003ctd\u003e10 kHz \/ 50 µs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePripojenie\u003c\/td\u003e\n\u003ctd\u003eKonektor M12 5-pin.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKryt \/ stupeň ochrany\u003c\/td\u003e\n\u003ctd\u003eTlakovo liate zinkové puzdro, krytie IP67.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevádzková teplota\u003c\/td\u003e\n\u003ctd\u003e-10 °C až +55 °C.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHmotnosť\u003c\/td\u003e\n\u003ctd\u003ePribližne 400 g.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003ePoznámky k výberu\u003c\/h2\u003e\n\u003cp\u003ePred objednaním si overte presný model KT5W-2N1116, požiadavku na NPN výstup, zapojenie konektora M12 5-pin, snímaciu vzdialenosť a vstup stroja. Ak je dôležitá dĺžka kábla alebo orientácia konektora, porovnajte dodaný kábel zobrazený na fotografiách produktu s požiadavkami na zapojenie vášho stroja.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eČasto kladené otázky\u003c\/h2\u003e\n\u003ch3\u003eNa čo sa tento snímač používa?\u003c\/h3\u003e\n\u003cp\u003ePoužíva sa na detekciu kontrastu a farebných značiek, napríklad na rozpoznanie tlačenej značky alebo registračnej značky od pozadia.\u003c\/p\u003e\n\u003ch3\u003eAké napájanie používa?\u003c\/h3\u003e\n\u003cp\u003eŠpecifikácia snímača uvádza rozsah napájacieho napätia 10 V DC až 30 V DC.\u003c\/p\u003e\n\u003ch3\u003eAký typ výstupu má tento model?\u003c\/h3\u003e\n\u003cp\u003eTento model KT5W-2N1116 je s NPN spínacím výstupom.\u003c\/p\u003e\n\u003ch3\u003eČo je súčasťou balenia?\u003c\/h3\u003e\n\u003cp\u003eBalenie obsahuje 1 ks kontrastný snímač farebných značiek KT5W-2N1116 a 1 ks kábel.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Predvolený názov","offer_id":43370945970265,"sku":"FMF-KT5W-2N1116-87865","price":125.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S97d8f7bd87364402aaa4aed5f36e5e658.webp?v=1780390808"},{"product_id":"dc24v-magnetic-powder-clutch-hollow-shaft-6nm-12nm-25nm-for-tension-control-winding-printing-packaging-textile-machine","title":"DC24V Hollow Shaft Magnetic Powder Clutch 6Nm 12Nm 25Nm","description":"\u003csection\u003e\n\u003ch2\u003eDC24V Hollow Shaft Magnetic Powder Clutch\u003c\/h2\u003e\n\u003cp\u003eThis hollow shaft magnetic powder clutch is used for torque and tension control in winding, printing, packaging, and textile machinery. Package includes DC24V FL-K series options with 6Nm, 12Nm, and 25Nm torque ratings.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: hollow shaft magnetic powder clutch.\u003c\/li\u003e\n\u003cli\u003eVoltage: DC24V.\u003c\/li\u003e\n\u003cli\u003eAvailable torque options: 6Nm, 12Nm, and 25Nm.\u003c\/li\u003e\n\u003cli\u003eOption series shown on This product: FL-K-06, FL-K-12, and FL-K-25.\u003c\/li\u003e\n\u003cli\u003eCommon use: tension control for winding, printing, packaging, and textile machine applications.\u003c\/li\u003e\n\u003cli\u003eHollow shaft design supports compact integration into mechanical assemblies.\u003c\/li\u003e\n\u003cli\u003eUse a DC24V power source only. Using an AC power source can damage the clutch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eAvailable Options\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"text-align: left;\"\u003eOption\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eTorque\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eSKU\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFL-K-06\u003c\/td\u003e\n\u003ctd\u003e6Nm\u003c\/td\u003e\n\u003ctd\u003eFMF-DC24V-09305-FL-K-06-6NM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFL-K-12\u003c\/td\u003e\n\u003ctd\u003e12Nm\u003c\/td\u003e\n\u003ctd\u003eFMF-DC24V-09305-FL-K-12-12NM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFL-K-25\u003c\/td\u003e\n\u003ctd\u003e25Nm\u003c\/td\u003e\n\u003ctd\u003eFMF-DC24V-09305-FL-K-25-25NM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSelection Notes\u003c\/h2\u003e\n\u003cp\u003eSelect the torque option that matches your machine design and tension-control requirement. Compare the option name, SKU, product photos, shaft style, and DC24V power requirement with your current machine before ordering.\u003c\/p\u003e\n\u003cp\u003eIf your project requires another magnetic powder clutch or magnetic powder brake model, use the product photos and model details on the target listing to confirm the correct replacement part.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is this magnetic powder clutch used for?\u003c\/h3\u003e\n\u003cp\u003eIt is used for torque and tension control in equipment such as winding, printing, packaging, and textile machines.\u003c\/p\u003e\n\u003ch3\u003eWhich torque options are available?\u003c\/h3\u003e\n\u003cp\u003eThis product offers 6Nm, 12Nm, and 25Nm options: FL-K-06, FL-K-12, and FL-K-25.\u003c\/p\u003e\n\u003ch3\u003eWhat power source should I use?\u003c\/h3\u003e\n\u003cp\u003eUse DC24V only. The product notes warn that using an AC power source can damage the clutch.\u003c\/p\u003e\n\u003ch3\u003eHow should I choose the right option?\u003c\/h3\u003e\n\u003cp\u003eMatch the torque rating, FL-K option, SKU, shaft style, and product images with the requirements of your tension-control system.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"FL K 06 6Nm","offer_id":43370949771353,"sku":"FMF-DC24V-09305-FL-K-06-6NM","price":51.58,"currency_code":"USD","in_stock":true},{"title":"FL K 12 12Nm","offer_id":43370949804121,"sku":"FMF-DC24V-09305-FL-K-12-12NM","price":103.15,"currency_code":"USD","in_stock":true},{"title":"FL K 25 25Nm","offer_id":43370949836889,"sku":"FMF-DC24V-09305-FL-K-25-25NM","price":149.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S044d9928f97f4e769426cd110dfa866ci.webp?v=1780390860"},{"product_id":"epc-a12-edge-line-position-controller","title":"EPC-A12 Regulátor polohy okraja\/linie pre vedenie pásu","description":"\u003csection\u003e\n\u003ch2\u003eČo je tento regulátor\u003c\/h2\u003e\n\u003cp\u003eEPC-A12 je regulátor polohy okraja\/linie pre priemyselné systémy vedenia a korekcie pásu. Používa sa ako riadiaca jednotka v systémoch vyžadujúcich korekciu okraja, línie, stredu alebo hadovitého pohybu, vrátane režimov EPC, LPC, CPC a SPC uvedených pre tento produkt.\u003c\/p\u003e\n\u003cp\u003eTento produkt je len regulátor. Senzor\/detektor a pohon\/servomotor nie sú súčasťou balenia.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003ePodrobnosti o produkte\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eEPC-A12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTyp produktu\u003c\/th\u003e\n\u003ctd\u003eRegulátor polohy okraja\/linie\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eFMF-EPC-A12-33593\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eŠtítok napájania\u003c\/th\u003e\n\u003ctd\u003eDC24V; tabuľka na zadnom štítku uvádza 24VDC \/ 6A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOznačenie zadných konektorov\u003c\/th\u003e\n\u003ctd\u003eNapájanie 4P, Servomotor 8P, Detektor 5P, Rozširujúci port 6P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOznačenie svoriek\u003c\/th\u003e\n\u003ctd\u003ePort MC, RS485, 0-10V, OUT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eZobrazené predné ovládacie prvky\u003c\/th\u003e\n\u003ctd\u003eAuto, Man, Detect, Cent, Set, Left, Right, ESC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eKedy je tento model vhodný\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePoužite ho, keď potrebujete regulátor EPC-A12 pre korekciu polohy okraja alebo línie.\u003c\/li\u003e\n\u003cli\u003ePoužite ho, keď je váš systém postavený na samostatnom detektore\/senzore a servomotore alebo pohone pripojenom k portom regulátora.\u003c\/li\u003e\n\u003cli\u003ePred objednaním skontrolujte požiadavku na napájanie 24VDC, zapojenie, detektor, servomotor alebo pohon a priestor na paneli.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eDôležité poznámky k objednávke\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTáto stránka produktu neuvádza senzor, pohon, servomotor, montážnu súpravu, káblovú sadu ani externý zdroj napájania ako súčasť príslušenstva.\u003c\/li\u003e\n\u003cli\u003eNevyberajte si túto položku ako kompletnú súpravu na vedenie pásu, pokiaľ už nemáte zodpovedajúce externé komponenty alebo neplánujete ich samostatné zaobstaranie.\u003c\/li\u003e\n\u003cli\u003eAk nahrádzate existujúci regulátor, porovnajte názov modelu EPC-A12, označenie zadných portov, požiadavku na napájanie a usporiadanie predného panela s vašou súčasnou jednotkou.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eJe to kompletný systém vedenia pásu EPC-A12?\u003c\/h3\u003e\n\u003cp\u003eNie. Tento produkt je len regulátor polohy okraja\/linie EPC-A12. Senzor\/detektor a pohon\/servomotor nie sú súčasťou balenia.\u003c\/p\u003e\n\u003ch3\u003eAké napájanie mám pred kúpou skontrolovať?\u003c\/h3\u003e\n\u003cp\u003eZadný štítok produktu uvádza DC24V a tabuľka portov uvádza 24VDC \/ 6A. Pred objednaním skontrolujte napájanie a zapojenie vášho stroja.\u003c\/p\u003e\n\u003ch3\u003eKtoré zadné porty sú na regulátore viditeľné?\u003c\/h3\u003e\n\u003cp\u003eZadný panel zobrazuje konektory pre napájanie, servomotor, detektor a rozširujúci port, plus svorkovnicu s označením MC Port, RS485, 0-10V a OUT.\u003c\/p\u003e\n\u003ch3\u003eKtoré korekčné režimy sú určené pre tento regulátor?\u003c\/h3\u003e\n\u003cp\u003eTento produkt odkazuje na korekčné režimy EPC, LPC, CPC a SPC. Spárujte regulátor so správnym externým detektorom a pohonom pre váš stroj.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Predvolený názov","offer_id":43370950983769,"sku":"FMF-EPC-A12-33593","price":260.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S102a65c5a04d47409a59b4a9d171f659S.webp?v=1780390869"},{"product_id":"ktc800a-tension-controller-24v-magnetic-powder-brake-clutch-controller-for-web-tension-control-system","title":"KTC800A Regulátor napätia pre magnetickú práškovú brzdu a spojku","description":"\u003csection\u003e\n\u003ch2\u003ePrehľad produktu\u003c\/h2\u003e\n\u003cp\u003eRegulátor napätia KTC800A je manuálny regulátor pre systémy riadenia napätia pásu s použitím magnetickej práškovej brzdy alebo magnetickej práškovej spojky. Poskytuje nastaviteľný jednosmerný výstup 0-24V až do 4A a využíva pulznú šírkovú moduláciu na efektívne riadenie brzdy alebo spojky.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eKľúčové podrobnosti\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: KTC800A\u003c\/li\u003e\n\u003cli\u003ePoužitie: riadenie napätia pásu so zariadením s magnetickou práškovou brzdou alebo spojkou\u003c\/li\u003e\n\u003cli\u003eNapájanie: AC 185-264V\u003c\/li\u003e\n\u003cli\u003eVýstup: DC 0-24V, až do 4A\u003c\/li\u003e\n\u003cli\u003eSpôsob riadenia: pulzná šírková modulácia (PWM)\u003c\/li\u003e\n\u003cli\u003eRežimy riadenia: konštantný prúd, konštantné napätie, konštantný výkon alebo externý potenciometer\u003c\/li\u003e\n\u003cli\u003eReferenčné SKU: FMF-KTC800A-99129\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eTechnické špecifikácie\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePoložka\u003c\/th\u003e\n\u003cth\u003eŠpecifikácia\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eKTC800A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNapájanie\u003c\/td\u003e\n\u003ctd\u003eAC 185-264V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVýstupné napätie\/prúd\u003c\/td\u003e\n\u003ctd\u003eDC 0-24V \/ 4A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRozsah nastavenia prúdu\u003c\/td\u003e\n\u003ctd\u003e0.00-4.00A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKrok nastavenia prúdu\u003c\/td\u003e\n\u003ctd\u003e0.01A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRiadenie výstupu\u003c\/td\u003e\n\u003ctd\u003ePWM pulzná šírková modulácia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrevádzkové režimy\u003c\/td\u003e\n\u003ctd\u003eKonštantný prúd, konštantné napätie, konštantný výkon, externý potenciometer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003ePoznámky k režimom\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eV režime konštantného prúdu svieti indikátor konštantného prúdu na paneli a gombíkom sa nastavuje požadovaný prúd.\u003c\/li\u003e\n\u003cli\u003eAk má pripojená spojka alebo brzda nižší menovitý výkon, skutočný prúd môže byť nižší ako nastavenie regulátora.\u003c\/li\u003e\n\u003cli\u003eNapríklad magnetická prášková spojka 12Nm označená 24V\/1.2A by sa mala používať so svojím menovitým prúdom, nie len s maximálnym výstupom.\u003c\/li\u003e\n\u003cli\u003ePred použitím režimu konštantného výkonu kalibrujte pripojenú spojku alebo brzdu.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003ePoznámky k výberu\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSkontrolujte, či magnetická prášková brzda alebo spojka vyžaduje jednosmerné riadenie 24V a či je v rozsahu výstupu 4A.\u003c\/li\u003e\n\u003cli\u003ePred objednaním overte spôsob zapojenia stroja, požadovaný režim riadenia a montážny priestor.\u003c\/li\u003e\n\u003cli\u003eExterný potenciometer používajte len vtedy, keď vaše usporiadanie riadenia stroja vyžaduje diaľkové manuálne nastavenie.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eČo reguluje KTC800A?\u003c\/h3\u003e\n\u003cp\u003eNastavuje výstup na magnetickú práškovú brzdu alebo spojku, aby stroj mohol riadiť napätie pásu počas odvíjania, navíjania alebo súvisiacich procesov manipulácie s materiálom.\u003c\/p\u003e\n\u003ch3\u003eČo by som mal skontrolovať pred objednaním?\u003c\/h3\u003e\n\u003cp\u003eSkontrolujte menovité napätie a prúd brzdy alebo spojky, spôsob zapojenia, režim riadenia a či zariadenie vyžaduje konštantný prúd, konštantné napätie, konštantný výkon alebo nastavenie externým potenciometrom.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Predvolený názov","offer_id":43370951049305,"sku":"FMF-KTC800A-99129","price":40.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S0270ccaf20c042518d990f08a56b6b48q.webp?v=1780390871"},{"product_id":"epc-a18-servo-web-guiding-system-ultrasonic-sensor-150mm","title":"EPC-A18 Servo systém vedenia pásu s ultrazvukovým snímačom, zdvih 150mm","description":"\u003ch2\u003eEPC-A18 servo systém vedenia pásu na korekciu okrajov\u003c\/h2\u003e\n\u003cp\u003eSystém EPC-A18 je servo systém vedenia pásu určený na EPC vedenie okrajov a súvisiace korekcie polohy pásu. Táto ponuka je vybavená ultrazvukovým snímačom a aktuátorom so zdvihom 150 mm na udržanie zarovnania materiálu privádzaného z kotúča počas výroby.\u003c\/p\u003e\n\u003ch2\u003eKľúčové podrobnosti\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eEPC-A18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTyp systému\u003c\/th\u003e\n\u003ctd\u003eServo systém vedenia pásu \/ riadenie polohy okraja\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSnímač v tejto ponuke\u003c\/th\u003e\n\u003ctd\u003eUltrazvukový snímač\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eZdvih aktuátora\u003c\/th\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRežimy vedenia\u003c\/th\u003e\n\u003ctd\u003eEPC vedenie okrajov, LPC vedenie línie, CPC stredové vedenie a SPC oscilačné riadenie korekcie\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePodporované typy snímačov\u003c\/th\u003e\n\u003ctd\u003eFotoelektrický snímač, ultrazvukový snímač, snímač farebnej značky a súvisiace snímače vedenia pásu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRozhranie\u003c\/th\u003e\n\u003ctd\u003eFarebný dotykový HMI so sprievodcom parametrami a online nápovedou\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eReferenčné SKU\u003c\/th\u003e\n\u003ctd\u003eFMF-EPC-A18-44313\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eTypické aplikácie\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eZarovnanie fólie, papiera, flexibilných obalov a pásových materiálov.\u003c\/li\u003e\n\u003cli\u003eBaliace stroje vyžadujúce automatickú korekciu okrajov.\u003c\/li\u003e\n\u003cli\u003eLinky na výrobu batérií, ktoré potrebujú stabilné vedenie pásu.\u003c\/li\u003e\n\u003cli\u003eLinky na spracovanie textilu a tkanín vyžadujúce sledovanie okrajov.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePred objednaním\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOverte požadovaný typ snímača, zdvih aktuátora a montážny priestor na vašom stroji.\u003c\/li\u003e\n\u003cli\u003eSkontrolujte, či váš proces vyžaduje vedenie okrajov, vedenie línie, stredové vedenie alebo oscilačnú korekciu.\u003c\/li\u003e\n\u003cli\u003ePorovnajte usporiadanie ovládača, snímača, aktuátora a káblov s vaším súčasným systémom vedenia pásu.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eNa čo sa tento systém používa?\u003c\/h3\u003e\n\u003cp\u003ePoužíva sa na detekciu polohy pásu a riadenie korekcie, aby materiál privádzaný z kotúča zostal počas výroby zarovnaný.\u003c\/p\u003e\n\u003ch3\u003eJe táto ponuka pre konfiguráciu so zdvihom 150 mm?\u003c\/h3\u003e\n\u003cp\u003eÁno. Táto stránka produktu je pre servo systém vedenia pásu EPC-A18 nakonfigurovaný s ultrazvukovým snímačom a zdvihom 150 mm.\u003c\/p\u003e\n\u003ch3\u003ePodporuje rôzne režimy vedenia pásu?\u003c\/h3\u003e\n\u003cp\u003eÁno. Informácie o produkte uvádzajú EPC vedenie okrajov, LPC vedenie línie, CPC stredové vedenie a SPC oscilačné riadenie korekcie.\u003c\/p\u003e\n\u003ch3\u003eČo by som mal skontrolovať pred nákupom?\u003c\/h3\u003e\n\u003cp\u003eSkontrolujte typ snímača, zdvih aktuátora, montážny priestor na stroji, zapojenie a režim vedenia požadovaný vaším materiálom a výrobnou linkou.\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Predvolený názov","offer_id":43370953769049,"sku":"FMF-EPC-A18-44313","price":508.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S385affa5f7304529928a41b03f41beded.webp?v=1780390897"},{"product_id":"ps-400s-us-400s-zps-2-epc-web-guide-sensor-mount-bracket-adjustable-holder-for-ultrasonic-photoelectric-ccd-edge-tracking-sensor","title":"PS-400S US-400S ZPS-2 Web Guide Edge Sensor \u0026 Adjustable Mount Bracket","description":"\u003csection\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003ePS-400S, US-400S, ZPS-2 and the matching adjustable mounting bracket are web guide edge tracking parts for EPC systems. Use the option selector to choose the photoelectric sensor, ultrasonic edge sensor, ZPS-2 sensor, or bracket needed for your web guiding setup.\u003c\/p\u003e\n\u003cp\u003eThe adjustable bracket helps position edge tracking sensors for roll material alignment. The sensor options are used with EPC web guide systems for film, paper, tape and other supported roll materials.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eAvailable Options\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\" border=\"1\" cellspacing=\"0\" cellpadding=\"8\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"text-align: left;\"\u003eOption\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eSKU\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eTypical role\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Bracket\u003c\/td\u003e\n\u003ctd\u003eFMF-PS-400S-71993-MOUNTING-BRACKET\u003c\/td\u003e\n\u003ctd\u003eAdjustable holder for positioning a compatible web guide edge sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUS-400S\u003c\/td\u003e\n\u003ctd\u003eFMF-PS-400S-71993-US-400S\u003c\/td\u003e\n\u003ctd\u003eUltrasonic edge sensor option for EPC web guiding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePS-400S\u003c\/td\u003e\n\u003ctd\u003eFMF-PS-400S-71993-PS-400S\u003c\/td\u003e\n\u003ctd\u003ePhotoelectric edge sensor option for EPC web guiding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZPS-2\u003c\/td\u003e\n\u003ctd\u003eFMF-PS-400S-71993-ZPS-2\u003c\/td\u003e\n\u003ctd\u003ePhotoelectric sensor option for edge tracking systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSelection Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eChoose the bracket when you only need the adjustable sensor holder.\u003c\/li\u003e\n\u003cli\u003eChoose US-400S when your setup calls for an ultrasonic edge sensor for EPC web guiding.\u003c\/li\u003e\n\u003cli\u003eChoose PS-400S when your setup calls for a photoelectric edge sensor.\u003c\/li\u003e\n\u003cli\u003eChoose ZPS-2 only when that exact sensor model matches your machine or replacement requirement.\u003c\/li\u003e\n\u003cli\u003eConfirm the model name, connector\/cable needs, controller compatibility and installation dimensions before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eMaterial Fit and Limits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable applications listed for this product include film, paper, tape and other roll materials used in web guiding.\u003c\/li\u003e\n\u003cli\u003eThe ultrasonic option is described for non-breathable materials such as plastic film and paper.\u003c\/li\u003e\n\u003cli\u003eDo not use this listing as confirmation for breathable fabric or non-woven material applications unless your machine supplier confirms the exact sensor choice.\u003c\/li\u003e\n\u003cli\u003eExact wiring, voltage, output signal, detection range and accuracy should be checked against your machine requirements or supplier documentation before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs this listing for a bracket or for sensors?\u003c\/h3\u003e\n\u003cp\u003eIt includes selectable options. You can choose the mounting bracket, US-400S ultrasonic edge sensor, PS-400S photoelectric edge sensor, or ZPS-2 sensor option from the product selector.\u003c\/p\u003e\n\u003ch3\u003eWhat is it used for?\u003c\/h3\u003e\n\u003cp\u003eThese parts are used around EPC web guide edge tracking systems to detect or position the edge of roll materials such as film, paper and tape.\u003c\/p\u003e\n\u003ch3\u003eCan I use it for non-woven fabric?\u003c\/h3\u003e\n\u003cp\u003eThe current product information says breathable materials such as fabric and non-woven materials are not suitable. Please confirm with your machine supplier before using it for those materials.\u003c\/p\u003e\n\u003ch3\u003eWhat should I confirm before ordering?\u003c\/h3\u003e\n\u003cp\u003eConfirm the exact model, sensor type, mounting requirement, cable or connector needs, controller compatibility and installation space. If your machine requires a specific voltage, output or detection range, verify those details before ordering.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Mounting Bracket","offer_id":43370954260569,"sku":"FMF-PS-400S-71993-MOUNTING-BRACKET","price":24.02,"currency_code":"USD","in_stock":true},{"title":"US-400S","offer_id":43370954293337,"sku":"FMF-PS-400S-71993-US-400S","price":75.15,"currency_code":"USD","in_stock":true},{"title":"PS-400S","offer_id":43370954326105,"sku":"FMF-PS-400S-71993-PS-400S","price":62.04,"currency_code":"USD","in_stock":true},{"title":"ZPS-2","offer_id":43370954358873,"sku":"FMF-PS-400S-71993-ZPS-2","price":55.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sd13d490dcea54bff97c4e3059f1fe8705.webp?v=1780390903"},{"product_id":"gdj-211-color-mark-sensor-photo-eye-gdj211bg-bag-making-machine-photoelectric-sensor-detector","title":"GDJ-211 Color Mark Photoelectric Sensor GDJ211BG for Bag Making Machines","description":"\u003csection\u003e\n\u003ch2\u003eGDJ-211 Color Mark Photoelectric Sensor for Bag Making Machines\u003c\/h2\u003e\n\u003cp\u003eThe GDJ-211 \/ GDJ211BG is a color mark photoelectric sensor photo eye supplied for bag making machine and industrial automation sensor replacement needs. It is listed under FMF Supply's automation control components with SKU FMF-GDJ-211-17177.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eGDJ-211 \/ GDJ211BG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003ePhotoelectric sensor \/ color mark sensor photo eye\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApplication wording\u003c\/th\u003e\n\u003ctd\u003eBag making machine photoelectric sensor detector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eFMF-GDJ-211-17177\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStore category\u003c\/th\u003e\n\u003ctd\u003eBusiness \u0026amp; Industrial automation control component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSelection Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse this page when you are matching the GDJ-211 or GDJ211BG model name, color mark sensor wording, or photo eye sensor wording from your existing machine.\u003c\/li\u003e\n\u003cli\u003eCompare the product images and SKU with your current sensor before ordering.\u003c\/li\u003e\n\u003cli\u003eIf your installation depends on wiring, voltage, output mode, detection distance, or controller compatibility, confirm those specifications before purchase because they are not in the current listing data.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs This product for the GDJ-211 \/ GDJ211BG sensor?\u003c\/h3\u003e\n\u003cp\u003eYes. The Shopify product data identifies this item as GDJ-211 \/ GDJ211BG, a color mark photoelectric sensor photo eye.\u003c\/p\u003e\n\u003ch3\u003eCan I use it for a bag making machine?\u003c\/h3\u003e\n\u003cp\u003eThe product details data describes it as a bag making machine photoelectric sensor detector. Match the model and physical sensor style with your machine before ordering.\u003c\/p\u003e\n\u003ch3\u003eAre voltage, output, or wiring details confirmed?\u003c\/h3\u003e\n\u003cp\u003eNot in the current product details data. Confirm those electrical details before purchase if they are required for your installation.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Predvolený názov","offer_id":43370956390489,"sku":"FMF-GDJ-211-17177","price":51.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Seea1895e08fd4698877a5221bc5f4847k.webp?v=1780390931"},{"product_id":"pg600a-web-guiding-control-system-600mm-edge-controller","title":"PG600A All-in-One Web Guiding Control System, 600mm Line Edge Controller","description":"\u003ch2\u003ePG600A all-in-one web guiding control system\u003c\/h2\u003e\n\u003cp\u003eThe PG600A is an all-in-one web guiding control system for line and edge position correction in printing, packaging, label, and non-woven production lines. It is designed for roll-fed materials where the web position must be kept aligned during continuous processing.\u003c\/p\u003e\n\u003ch2\u003eKey details\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003ePG600A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSystem type\u003c\/th\u003e\n\u003ctd\u003eAll-in-one web guiding control system \/ line edge position controller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eListed configuration\u003c\/th\u003e\n\u003ctd\u003e600 mm line edge position controller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTypical industries\u003c\/th\u003e\n\u003ctd\u003eLabel printing, packaging, and non-woven production\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrive and positioning\u003c\/th\u003e\n\u003ctd\u003ePrecision ball screw bar for positioning control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGuiding speed\u003c\/th\u003e\n\u003ctd\u003e40 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorking environment\u003c\/th\u003e\n\u003ctd\u003e-10 to 60 C, RH below 90%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSensor options\u003c\/th\u003e\n\u003ctd\u003eUltrasonic, photoelectric, color mark, or CCD sensor selection based on material type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSensor installation\u003c\/th\u003e\n\u003ctd\u003eLeft or right sensor position should be confirmed before ordering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU reference\u003c\/th\u003e\n\u003ctd\u003eFMF-PG600A-87193\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eApplication fit\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrinting and packaging lines that need line or edge correction.\u003c\/li\u003e\n\u003cli\u003eLabel production where material alignment affects print and cutting accuracy.\u003c\/li\u003e\n\u003cli\u003eNon-woven material handling and other flexible web processes.\u003c\/li\u003e\n\u003cli\u003eCustom roller length, roller width, sensor position, and fixture choices when the machine layout requires confirmation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm the web width, roller size, available mounting space, and required guiding travel.\u003c\/li\u003e\n\u003cli\u003eSelect the sensor type according to material behavior, transparency, color mark use, and edge detection method.\u003c\/li\u003e\n\u003cli\u003eConfirm whether your cutting station needs a manual fixture or air fixture.\u003c\/li\u003e\n\u003cli\u003eShare the left\/right sensor position and any custom size requirements before production.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is the PG600A used for?\u003c\/h3\u003e\n\u003cp\u003eIt is used to control web line or edge position so roll-fed material stays aligned during printing, packaging, labeling, or non-woven production.\u003c\/p\u003e\n\u003ch3\u003eWhich sensor type should I choose?\u003c\/h3\u003e\n\u003cp\u003eThe product information lists ultrasonic, photoelectric, color mark, and CCD sensor options. The right choice depends on the material type, edge condition, and whether the process tracks an edge, line, or mark.\u003c\/p\u003e\n\u003ch3\u003eCan the roller and fixture be customized?\u003c\/h3\u003e\n\u003cp\u003eThe product information lists customizable roller length and width, plus manual or air fixture options at the cutting station. Confirm the required dimensions and fixture style before ordering.\u003c\/p\u003e\n\u003ch3\u003eWhat should I verify before purchase?\u003c\/h3\u003e\n\u003cp\u003eConfirm web width, mounting dimensions, sensor type, sensor side, fixture style, and the machine layout so the PG600A configuration matches your production line.\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Predvolený názov","offer_id":43370960846937,"sku":"FMF-PG600A-87193","price":1154.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S67d8eb1f99c545e694a438183f820f29A.webp?v=1780391035"},{"product_id":"epc-a12-edge-guiding-system-web-guide-controller-sensor-servo-actuator-edge-position-control","title":"EPC-A12 Web Guide Controller Kit with Sensor and Servo Actuator","description":"\u003cp\u003e\u003cstrong\u003eEPC-A12 web guide controller kit\u003c\/strong\u003e for industrial web, roll and strip position correction. This listing is a single-sensor kit: one EPC-A12 controller, one selected sensor type and one PD-204L150T servo actuator. The controller can be used in different correction setups, but the working mode depends on the matched sensor signal, the number of sensors, the actuator or guide-frame layout and the controller settings.\u003c\/p\u003e\n\n\u003ch2\u003eKit Configuration and Mode Selection\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThis product kit:\u003c\/strong\u003e one sensor is included. Choose either the ultrasonic sensor type or the photoelectric sensor type.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle edge or single line correction:\u003c\/strong\u003e a single-sensor setup is normally used for single-side edge guiding or single-line guiding.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter or serpentine correction:\u003c\/strong\u003e this normally requires two same-type sensors, plus the matched actuator or center guide frame and two sensor brackets.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor type must be selected in the controller:\u003c\/strong\u003e the controller menu supports ultrasonic, photoelectric and optional HCCD detector selection. This listing offers ultrasonic or photoelectric variants only.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDo not treat EPC\/LPC\/CPC\/SPC as sensor-only functions:\u003c\/strong\u003e they are correction modes created by the controller, sensor input, mechanical installation and setup working together.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCorrection Modes\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\" border=\"1\" cellspacing=\"0\" cellpadding=\"8\"\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align: left;\"\u003eMode\u003c\/th\u003e\n      \u003cth style=\"text-align: left;\"\u003eMeaning\u003c\/th\u003e\n      \u003cth style=\"text-align: left;\"\u003eWhat the buyer should confirm\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eEPC\u003c\/td\u003e\n      \u003ctd\u003eEdge Position Control, edge guiding\u003c\/td\u003e\n      \u003ctd\u003eUsually fits the single-sensor kit when the selected sensor can detect the material edge.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLPC\u003c\/td\u003e\n      \u003ctd\u003eLine Position Control, line tracking\u003c\/td\u003e\n      \u003ctd\u003eRequires a detectable line, mark or signal condition. The single-sensor package can be used only when the sensor and material setup are suitable.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCPC\u003c\/td\u003e\n      \u003ctd\u003eCenter Position Control, center guiding\u003c\/td\u003e\n      \u003ctd\u003eNormally needs two same-type sensors and the matched guide-frame or actuator layout. Ask for a dual-sensor configuration.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSPC\u003c\/td\u003e\n      \u003ctd\u003eSerpentine Position Control, offset or serpentine correction\u003c\/td\u003e\n      \u003ctd\u003eNormally needs two same-type sensors, proper actuator layout and parameter setup. Ask before ordering a standard single-sensor kit.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eSensor Type Selection\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\" border=\"1\" cellspacing=\"0\" cellpadding=\"8\"\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align: left;\"\u003eSensor option\u003c\/th\u003e\n      \u003cth style=\"text-align: left;\"\u003eBest-fit use\u003c\/th\u003e\n      \u003cth style=\"text-align: left;\"\u003eSetup notes\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eUS-400S ultrasonic sensor\u003c\/td\u003e\n      \u003ctd\u003eEdge guiding for transparent, opaque and very transparent non-breathable web materials such as plastic film, paper and foil.\u003c\/td\u003e\n      \u003ctd\u003eUltrasonic detection is not affected by material transparency and normally does not need material transparency calibration. Not suitable for breathable or porous materials such as cloth and non-woven fabric.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePS-400S photoelectric sensor\u003c\/td\u003e\n      \u003ctd\u003eEdge guiding where the material edge can be detected reliably by photoelectric through-beam sensing.\u003c\/td\u003e\n      \u003ctd\u003ePhotoelectric detection is affected by material color, transparency and reflectivity, so it needs calibration for different materials. It is commonly used for opaque material edge guiding.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOptional HCCD sensor\u003c\/td\u003e\n      \u003ctd\u003eLine, pattern, contrast edge or more complex target tracking.\u003c\/td\u003e\n      \u003ctd\u003eOptional HCCD detection can track material edge, contrast edge, line and pattern targets. HCCD is not included in this listing unless quoted separately.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eController and Actuator Specifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eController supply: DC24 V to DC45 V, standard 24 V.\u003c\/li\u003e\n  \u003cli\u003eSensor supply: DC12 V, 350 mA max.\u003c\/li\u003e\n  \u003cli\u003eAnalog input: 3 channels, 0-5 V, 20 K impedance, 12-bit ADC.\u003c\/li\u003e\n  \u003cli\u003eSwitch input: 3 NPN inputs.\u003c\/li\u003e\n  \u003cli\u003eCorrection response time: 0.5 ms.\u003c\/li\u003e\n  \u003cli\u003eSupported detector type selection: ultrasonic, photoelectric and optional HCCD.\u003c\/li\u003e\n  \u003cli\u003ePD-204L150 actuator family: 150 mm stroke, 2 kN class thrust, 40 mm\/s max drive speed, +\/-75 mm travel reference.\u003c\/li\u003e\n  \u003cli\u003eServo actuator design: brushless DC servo motor with precision ball screw and encoder-based position calculation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat Is Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x EPC-A12 web guide controller.\u003c\/li\u003e\n  \u003cli\u003e1 x selected sensor type: ultrasonic type or photoelectric type.\u003c\/li\u003e\n  \u003cli\u003e1 x PD-204L150T servo actuator.\u003c\/li\u003e\n  \u003cli\u003eSensor bracket, power supply and connection cables as supplied with the kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e this standard listing is not a dual-sensor CPC\/SPC package. If your project needs center guiding, serpentine correction, HCCD tracking or a guide-frame version, confirm the required sensor quantity and mechanical layout before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFilm, paper, foil, label, printing and converting web guide applications.\u003c\/li\u003e\n  \u003cli\u003eBag making machines, slitting machines, cutters, rewinders and roll-to-roll equipment.\u003c\/li\u003e\n  \u003cli\u003eIndustrial edge guiding where material edge or line position must be corrected during web movement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eDoes one ultrasonic or photoelectric sensor realize EPC, LPC, CPC and SPC?\u003c\/h3\u003e\n\u003cp\u003eNo. EPC, LPC, CPC and SPC are controller-based correction modes. A single sensor is normally used for single edge or single line guiding. CPC and SPC normally require two same-type sensors and the matched mechanical setup.\u003c\/p\u003e\n\n\u003ch3\u003eWhich sensor should I choose for transparent film?\u003c\/h3\u003e\n\u003cp\u003eChoose ultrasonic when the web is non-breathable and transparency makes photoelectric detection difficult. Ultrasonic detection is not affected by transparency, but it is not recommended for breathable materials such as cloth or non-woven fabric.\u003c\/p\u003e\n\n\u003ch3\u003eWhen should I choose photoelectric?\u003c\/h3\u003e\n\u003cp\u003eChoose photoelectric when the material edge can be detected reliably by photoelectric through-beam sensing, especially for opaque or stable materials. Photoelectric sensing needs calibration because color, transparency and reflectivity can change the signal.\u003c\/p\u003e\n\n\u003ch3\u003eCan this kit do center guiding or serpentine correction?\u003c\/h3\u003e\n\u003cp\u003eThe controller supports those correction setups, but the standard single-sensor listing is not the complete CPC or SPC package. For center guiding or serpentine correction, ask for the dual-sensor configuration and confirm the guide-frame or actuator layout.\u003c\/p\u003e\n\n\u003ch3\u003eWhat information should I send before ordering?\u003c\/h3\u003e\n\u003cp\u003eSend your material type, transparency or breathability, web width, required correction mode, machine speed, actuator stroke requirement and whether you need edge, line, center or serpentine correction.\u003c\/p\u003e\n","brand":"FMF","offers":[{"title":"Photoelectric Type","offer_id":43370966712409,"sku":"FMF-EPC-A12-19353-PHOTOELECTRIC-TYPE","price":677.86,"currency_code":"USD","in_stock":true},{"title":"Ultrasonic Type","offer_id":43370966745177,"sku":"FMF-EPC-A12-19353-ULTRASONIC-TYPE","price":677.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Se879eabaca7a4a419586b77af78c1351J.webp?v=1780391147"},{"product_id":"epc-a12-ccd-edge-line-web-guide-system-pd403l150t-400kg-actuator","title":"EPC-A12 CCD Edge\/Line Web Guide System with PD403L150T 400kg Actuator","description":"\u003ch2\u003eEPC-A12 CCD edge\/line web guide system with PD403L150T actuator\u003c\/h2\u003e\n\u003cp\u003eThis listing is for an EPC-A12 controller kit supplied with an HCCD\/CCD camera sensor and a PD403L150T servo actuator. In this configuration, the set is intended for visible edge, contrast edge, printed line, printed mark and pattern tracking on roll-to-roll web materials.\u003c\/p\u003e\n\u003cp\u003eThe EPC-A12 controller platform can work with different sensor categories when the correct sensor is matched to the guiding task. This page is for the CCD camera sensor configuration. Ultrasonic, photoelectric and other sensor setups are separate configurations unless specifically confirmed.\u003c\/p\u003e\n\u003ch3\u003eWhat this CCD set is for\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEdge\/line position control where the CCD sensor can see a clear edge, line, printed mark or contrast target\u003c\/li\u003e\n  \u003cli\u003ePrinted web guiding for packaging, label, film and converting lines\u003c\/li\u003e\n  \u003cli\u003eEPC edge guiding and LPC line guiding tasks that need camera-based target recognition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSensor fit\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eIncluded sensor type\u003c\/td\u003e\n\u003ctd\u003eHCCD\/CCD digital camera sensor for line position and edge\/mark tracking\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBest-fit targets\u003c\/td\u003e\n\u003ctd\u003eVisible edge, contrast edge, printed line, printed mark, pattern target\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBefore ordering\u003c\/td\u003e\n\u003ctd\u003eIf the target is transparent, low contrast, irregular, or difficult to see, share material photos, line speed and guiding target so the sensor match can be checked.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eController platform capability vs. this kit\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEPC edge guiding\u003c\/td\u003e\n\u003ctd\u003eAvailable when the CCD sensor can identify the web edge or contrast edge\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLPC line guiding\u003c\/td\u003e\n\u003ctd\u003eAvailable when the CCD sensor can identify a visible line, printed mark or pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCPC center guiding\u003c\/td\u003e\n\u003ctd\u003eRequires a matching center or dual-edge sensor arrangement\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSPC serpentine correction\u003c\/td\u003e\n\u003ctd\u003eDepends on the machine layout and matched sensor\/control configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMain features of the included set\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEPC-A12 edge\/line position controller with color screen and manual\/auto controls\u003c\/li\u003e\n  \u003cli\u003eHCCD\/CCD camera sensor for visible edge, line, printed mark and pattern tracking\u003c\/li\u003e\n  \u003cli\u003ePD403L150T precision linear actuator with 150 mm travel, 400 kg thrust and 30 mm\/s speed\u003c\/li\u003e\n  \u003cli\u003eLinear position encoder feedback on the included actuator\u003c\/li\u003e\n  \u003cli\u003eIncluded power supply accepts 100-240V AC input\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEPC-A12 edge\/line position controller\u003c\/td\u003e\n\u003ctd\u003e1 set\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHCCD\/CCD camera sensor\u003c\/td\u003e\n\u003ctd\u003e1 pc\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePD403L150T servo actuator\u003c\/td\u003e\n\u003ctd\u003e1 set\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e1 pc, AC100-240V input\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCables and bracket mount\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEPC-A12 controller specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eEPC-A12\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eController supply voltage\u003c\/td\u003e\n\u003ctd\u003eDC 24V-45V, standard 24V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMotor drive capacity\u003c\/td\u003e\n\u003ctd\u003e24V-45V, max 10A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEncoder power supply\u003c\/td\u003e\n\u003ctd\u003eDC 15V, max 200mA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAnalog inputs\u003c\/td\u003e\n\u003ctd\u003e3 channels, 0-5V, 20K ohm impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSensor power supply\u003c\/td\u003e\n\u003ctd\u003eDC 12V, max 350mA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCorrection response time\u003c\/td\u003e\n\u003ctd\u003e0.5 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAnalog input resolution\u003c\/td\u003e\n\u003ctd\u003e12-bit ADC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSwitch inputs\u003c\/td\u003e\n\u003ctd\u003e3-channel NPN\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSupported sensor categories\u003c\/td\u003e\n\u003ctd\u003eUltrasonic, photoelectric and CCD, matched according to the guiding task\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eController drive speed range\u003c\/td\u003e\n\u003ctd\u003e1-75 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProtection rating\u003c\/td\u003e\n\u003ctd\u003eIP53\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eIncluded CCD sensor and actuator\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCCD sensor use\u003c\/td\u003e\n\u003ctd\u003eVisible edge, contrast edge, line, printed mark and pattern tracking\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSensor setup\u003c\/td\u003e\n\u003ctd\u003eTarget setup is required so the sensor knows what edge, line or mark to track\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator model\u003c\/td\u003e\n\u003ctd\u003ePD403L150T\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator application\u003c\/td\u003e\n\u003ctd\u003eEPC\/LPC web guiding system\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator travel\u003c\/td\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator thrust\u003c\/td\u003e\n\u003ctd\u003e400 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator speed\u003c\/td\u003e\n\u003ctd\u003e30 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePosition feedback\u003c\/td\u003e\n\u003ctd\u003eLinear position encoder\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrdering notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThis standard set includes the HCCD\/CCD camera sensor and PD403L150T actuator.\u003c\/li\u003e\n  \u003cli\u003eIt does not include ultrasonic, photoelectric or dual-edge center-guiding hardware unless separately confirmed.\u003c\/li\u003e\n  \u003cli\u003eFor low-contrast targets, transparent targets, center guiding, serpentine correction setup or a different actuator stroke\/thrust, contact us before ordering.\u003c\/li\u003e\n  \u003cli\u003eThe plug and voltage are configured according to the customer's shipping country by default.\u003c\/li\u003e\n  \u003cli\u003eFor matching support, share the web material, web width, line speed, target type and installation space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is included in this EPC-A12 set?\u003c\/h4\u003e\n\u003cp\u003eOne set includes the EPC-A12 edge\/line controller, HCCD\/CCD camera sensor, PD403L150T servo actuator, AC100-240V power supply, cables and bracket mount.\u003c\/p\u003e\n\u003ch4\u003eWhat guiding task is this CCD set for?\u003c\/h4\u003e\n\u003cp\u003eIt is for camera-based edge and line guiding where the sensor can identify a visible edge, contrast edge, printed line, printed mark or pattern.\u003c\/p\u003e\n\u003ch4\u003eCan it track printed marks?\u003c\/h4\u003e\n\u003cp\u003eYes. The included CCD sensor is intended for visible printed mark, line and pattern tracking after the target is set up.\u003c\/p\u003e\n\u003ch4\u003eCan this standard set do center guiding?\u003c\/h4\u003e\n\u003cp\u003eThe EPC-A12 controller can be configured for more than one guiding mode, but this standard CCD set is sold for edge\/line target tracking. Center guiding needs the matching sensor arrangement.\u003c\/p\u003e\n\u003ch4\u003eWhat actuator is included?\u003c\/h4\u003e\n\u003cp\u003eThe included actuator is PD403L150T, with 150 mm travel, 400 kg thrust, 30 mm\/s speed and linear position encoder feedback.\u003c\/p\u003e\n\u003ch4\u003eWhat should I check before ordering?\u003c\/h4\u003e\n\u003cp\u003eCheck whether the CCD sensor can clearly see the edge, line, printed mark or pattern to be tracked. For transparent, low-contrast or irregular targets, contact us before ordering.\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Predvolený názov","offer_id":43370966843481,"sku":"FMF-EPC-A12-17657","price":1071.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sa490e897cea5498fa814b23de42bac8d4.webp?v=1780391150"},{"product_id":"epc-a12sr-servo-edge-web-guide-kit-us-400s-ultrasonic-sensor-150mm-2kn-actuator","title":"EPC-A12SR Servo Edge Web Guide Kit with US-400S Ultrasonic Sensor, 150mm 2KN Actuator","description":"\u003ch2\u003eEPC-A12SR servo edge web guide kit with US-400S ultrasonic sensor\u003c\/h2\u003e\n\u003cp\u003eThis listing is for an EPC-A12SR controller kit supplied with a US-400S ultrasonic edge sensor and a PD-204L150T servo actuator. In this standard configuration, the set is intended for non-contact edge detection and servo edge correction on non-breathable moving web materials.\u003c\/p\u003e\n\u003cp\u003eThe US-400S ultrasonic sensor in this set is not suitable for cloth, woven fabric, mesh, porous web material or breathable material. If your material allows air to pass through it, contact us before ordering so we can help check a different sensor configuration.\u003c\/p\u003e\n\u003cp\u003eThe EPC-A12SR controller platform can support more than one guiding mode when it is matched with the required sensor and actuator configuration. Those controller-level capabilities are separate from what is included in this US-400S kit.\u003c\/p\u003e\n\u003ch3\u003eWhat this standard set is for\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle-edge web guiding \/ edge position control on non-breathable moving web materials\u003c\/li\u003e\n  \u003cli\u003eFilm, foil, label stock, plastic sheet and non-breathable strip material edge alignment\u003c\/li\u003e\n  \u003cli\u003ePrinting, packaging, slitting, winding, rewinding and converting lines that need automatic lateral edge correction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaterial fit\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRecommended for this US-400S set\u003c\/td\u003e\n\u003ctd\u003eNon-breathable film, foil, label stock, plastic sheet and similar non-porous web materials\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNot suitable for this US-400S set\u003c\/td\u003e\n\u003ctd\u003eCloth, woven fabric, mesh, porous web material and breathable material\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eController platform capability vs. this kit\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEPC edge guiding\u003c\/td\u003e\n\u003ctd\u003eIncluded with this US-400S ultrasonic edge sensor set for suitable non-breathable materials\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLPC line guiding\u003c\/td\u003e\n\u003ctd\u003eRequires a suitable line, color mark, optical or CCD detection setup\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCPC center guiding\u003c\/td\u003e\n\u003ctd\u003eRequires a matching center or dual-edge sensor arrangement\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSPC serpentine correction\u003c\/td\u003e\n\u003ctd\u003eDepends on the machine layout and matched sensor\/control configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMain features of the included set\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEPC-A12SR edge\/line position controller used here as an ultrasonic edge guiding controller\u003c\/li\u003e\n  \u003cli\u003ePD-204L150T servo actuator with 150 mm stroke and 2KN \/ 200 kgf thrust\u003c\/li\u003e\n  \u003cli\u003eUS-400S ultrasonic sensor for non-contact web edge detection on suitable non-breathable materials\u003c\/li\u003e\n  \u003cli\u003eColor HMI controller with manual\/auto operation and direction controls\u003c\/li\u003e\n  \u003cli\u003eIncluded power supply accepts 100-240V AC input and outputs 24V DC for the control system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEPC-A12SR correction controller\u003c\/td\u003e\n\u003ctd\u003e1 pc\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePD-204L150T servo actuator\u003c\/td\u003e\n\u003ctd\u003e1 pc\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUS-400S ultrasonic edge sensor\u003c\/td\u003e\n\u003ctd\u003e1 pc\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e1 pc, 100-240V AC input\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConnecting cables\u003c\/td\u003e\n\u003ctd\u003e3 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMounting bracket\u003c\/td\u003e\n\u003ctd\u003e1 pc\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eController specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eEPC-A12SR\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eController supply voltage\u003c\/td\u003e\n\u003ctd\u003eDC 24V-45V, standard 24V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMotor drive capacity\u003c\/td\u003e\n\u003ctd\u003e24V-45V, max 10A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAnalog inputs\u003c\/td\u003e\n\u003ctd\u003e3 channels, 0-5V, 20K ohm impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSensor power supply\u003c\/td\u003e\n\u003ctd\u003eDC 12V, max 350mA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCorrection response time\u003c\/td\u003e\n\u003ctd\u003e0.5 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAnalog input resolution\u003c\/td\u003e\n\u003ctd\u003e12-bit ADC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSwitch inputs\u003c\/td\u003e\n\u003ctd\u003e3-channel NPN\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSupported sensor categories\u003c\/td\u003e\n\u003ctd\u003eUltrasonic, photoelectric, color mark, CCD, matched according to the guiding task\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eController drive speed range\u003c\/td\u003e\n\u003ctd\u003e1-75 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProtection rating\u003c\/td\u003e\n\u003ctd\u003eIP53\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eIncluded US-400S sensor and actuator\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUltrasonic sensor model\u003c\/td\u003e\n\u003ctd\u003eUS-400S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSensor use in this set\u003c\/td\u003e\n\u003ctd\u003eNon-contact edge detection on suitable non-breathable web materials\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSensor supply\u003c\/td\u003e\n\u003ctd\u003eDC 12V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSensor output\u003c\/td\u003e\n\u003ctd\u003eDC 0-5V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDetection range\u003c\/td\u003e\n\u003ctd\u003e8 mm (+\/-4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDetection accuracy\u003c\/td\u003e\n\u003ctd\u003e0.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator model\u003c\/td\u003e\n\u003ctd\u003ePD-204L150T\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator thrust\u003c\/td\u003e\n\u003ctd\u003e2KN \/ 200 kgf\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator stroke\u003c\/td\u003e\n\u003ctd\u003e150 mm (+\/-75 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaximum actuator speed\u003c\/td\u003e\n\u003ctd\u003e40 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrdering notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThis standard set includes the US-400S ultrasonic edge sensor and PD-204L150T actuator.\u003c\/li\u003e\n  \u003cli\u003eDo not choose this US-400S set for cloth, woven fabric, mesh, porous web material or breathable material.\u003c\/li\u003e\n  \u003cli\u003eIt does not include photoelectric, color mark, CCD or dual-edge center-guiding hardware unless separately confirmed.\u003c\/li\u003e\n  \u003cli\u003eFor breathable materials, line guiding, color mark tracking, CCD detection, center guiding, serpentine correction setup or a different actuator stroke\/thrust, contact us before ordering.\u003c\/li\u003e\n  \u003cli\u003eThe plug and voltage are configured according to the customer's shipping country by default.\u003c\/li\u003e\n  \u003cli\u003eFor matching support, share the web material, web width, line speed, guiding mode and installation space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is included in this EPC-A12SR set?\u003c\/h4\u003e\n\u003cp\u003eOne set includes the EPC-A12SR controller, PD-204L150T servo actuator, US-400S ultrasonic edge sensor, power supply, connecting cables and mounting bracket.\u003c\/p\u003e\n\u003ch4\u003eWhat guiding task is this standard US-400S set for?\u003c\/h4\u003e\n\u003cp\u003eIt is for ultrasonic edge detection and servo edge correction on suitable non-breathable moving web materials.\u003c\/p\u003e\n\u003ch4\u003eCan I use this US-400S set for cloth or breathable material?\u003c\/h4\u003e\n\u003cp\u003eNo. The US-400S ultrasonic sensor in this set is not suitable for cloth, woven fabric, mesh, porous web material or breathable material.\u003c\/p\u003e\n\u003ch4\u003eCan this standard set do line guiding or center guiding?\u003c\/h4\u003e\n\u003cp\u003eThe EPC-A12SR controller can be configured for those modes, but this standard US-400S set is sold as an ultrasonic edge guiding kit. Line guiding, color mark tracking, CCD detection or center guiding requires the matching sensor setup.\u003c\/p\u003e\n\u003ch4\u003eWhat actuator is included?\u003c\/h4\u003e\n\u003cp\u003eThe included actuator is PD-204L150T, with 150 mm stroke, 2KN \/ 200 kgf thrust and 40 mm\/s maximum speed.\u003c\/p\u003e\n\u003ch4\u003eWhat sensor is included?\u003c\/h4\u003e\n\u003cp\u003eThe included sensor is the US-400S ultrasonic edge sensor for non-contact web edge detection on suitable non-breathable materials.\u003c\/p\u003e\n\u003ch4\u003eWhat power input does the set use?\u003c\/h4\u003e\n\u003cp\u003eThe included power supply accepts 100-240V AC input and outputs 24V DC for the control system.\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Predvolený názov","offer_id":43370967072857,"sku":"FMF-EPC-A12SR-81497","price":589.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sf1b803765c934cb0a6cbfb930989beb5i.webp?v=1780391154"},{"product_id":"epc-a10-servo-web-guiding-system-edge-line-position-controller-with-color-mark-sensor-pd-204l150t-servo-actuator","title":"EPC-A10 Servo Web Guide System with Color Mark Sensor","description":"\u003csection\u003e\n\u003ch2\u003eEPC-A10 Servo Web Guide System\u003c\/h2\u003e\n\u003cp\u003eThis EPC-A10 servo web guiding system is supplied as a web position control kit for edge-following, line-following, and center-alignment applications. The set includes an EPC-A10 controller, PS-260 color mark sensor, PD-204L150T servo actuator, DC24V power supply, mounting accessories, cables, and user manual.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eIncluded Components\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEPC-A10 servo web guide controller: 1 pc.\u003c\/li\u003e\n\u003cli\u003ePS-260 color mark sensor: 1 pc.\u003c\/li\u003e\n\u003cli\u003ePD-204L150T servo actuator with 150 mm stroke: 1 pc.\u003c\/li\u003e\n\u003cli\u003eDC switching power supply, AC 110-240V input to DC 24V output: 1 pc.\u003c\/li\u003e\n\u003cli\u003eMounting accessories and cables: 1 set.\u003c\/li\u003e\n\u003cli\u003eUser manual: 1 pc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eKey Functions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSupports edge-following, line-following, and center-alignment guiding modes.\u003c\/li\u003e\n\u003cli\u003eWorks with the included PS-260 color mark sensor and supports other sensor configurations such as photoelectric, ultrasonic, or CCD sensors when configured for the application.\u003c\/li\u003e\n\u003cli\u003eDesigned for continuous web guiding where material edge, printed line, or color mark position needs correction during running.\u003c\/li\u003e\n\u003cli\u003eUses a DC servo driver with no-overshoot integral variable PI control.\u003c\/li\u003e\n\u003cli\u003eStores up to 10 groups of material parameters for changeover.\u003c\/li\u003e\n\u003cli\u003eSupports Simplified Chinese, Traditional Chinese, and English menu languages.\u003c\/li\u003e\n\u003cli\u003eSupports Modbus communication and PLC\/HMI networking control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"text-align: left;\"\u003ePart\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEPC-A10 controller\u003c\/td\u003e\n\u003ctd\u003eDC servo driver, DC 24V \/ 5A power, 24V PWM output, 0.5 ms response time, 12-bit AD analog sampling, operating temperature -10°C to +60°C, weight 1.2 kg.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePS-260 color mark sensor\u003c\/td\u003e\n\u003ctd\u003e10-30 VDC power, 15 mm operating distance, +\/-3 mm depth of field with standard 15 mm lens, MARK\/BKGD setting buttons, analog 0-5V output signal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePD-204L150T actuator\u003c\/td\u003e\n\u003ctd\u003e2000 N max thrust, 200 kg driving load, 150 mm stroke range (+\/-75 mm), 40 mm\/s max driving speed.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSensor And Material Notes\u003c\/h2\u003e\n\u003cp\u003eThe included PS-260 color mark sensor is suitable for color mark, line, and contrast-based web guiding tasks. Other sensor types can be configured for different materials: ultrasonic sensors are often selected for transparent film or dusty environments, while CCD and photoelectric sensors may fit edge or line tracking depending on the material and installation.\u003c\/p\u003e\n\u003cp\u003eConfirm the web material, guiding mode, sensor type, actuator load, stroke requirement, and controller wiring before ordering or replacing an existing EPC system.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eCommon Applications\u003c\/h2\u003e\n\u003cp\u003eThis system is used in web handling equipment where moving material needs edge, line, or center position correction, including packaging, printing, paper, textile, metal sheet, film, and automated material handling applications.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is included in this EPC-A10 web guide system?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes the EPC-A10 controller, PS-260 color mark sensor, PD-204L150T servo actuator, DC24V power supply, mounting accessories, cables, and user manual.\u003c\/p\u003e\n\u003ch3\u003eWhich guiding modes does it support?\u003c\/h3\u003e\n\u003cp\u003eIt supports edge-following, line-following, and center-alignment modes.\u003c\/p\u003e\n\u003ch3\u003eWhat is the actuator stroke?\u003c\/h3\u003e\n\u003cp\u003eThe included PD-204L150T actuator has a 150 mm stroke range, listed as +\/-75 mm.\u003c\/p\u003e\n\u003ch3\u003eCan it use other sensors?\u003c\/h3\u003e\n\u003cp\u003eYes. The product notes state that other sensors are also available, including photoelectric, ultrasonic, and CCD sensor configurations. Confirm the material and tracking requirement before selecting another sensor.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Predvolený názov","offer_id":43370967138393,"sku":"FMF-EPC-A10-47033","price":692.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/970ce614-540d-4a03-a9ca-207768095163.png?v=1781282446"},{"product_id":"epc-a10-servo-web-guide-system-line-edge-position-controller-pd-803l200-actuator-800kg-200mm-us-500-ultrasonic-sensor","title":"EPC-A10 Servo Web Guide System with PD-803L200 Actuator and US-500 Ultrasonic Sensor","description":"\u003cdiv class=\"wrap\"\u003e\n  \u003cdiv class=\"card\"\u003e\n    \u003ch2\u003eEPC-A10 Servo Web Guide System for Edge and Line Position Control\u003c\/h2\u003e\n    \u003cp\u003eThe EPC-A10 web guide system is supplied as a matched set for roll-to-roll edge or line position correction. This configuration includes the EPC-A10 controller, a PD-803L200 servo actuator with 800kg thrust and 200mm travel, and a US-500 ultrasonic sensor.\u003c\/p\u003e\n\n    \u003cdiv class=\"grid\"\u003e\n      \u003cdiv class=\"box\"\u003e\n        \u003ch3\u003ePackage Includes\u003c\/h3\u003e\n        \u003cul\u003e\n          \u003cli\u003eEPC-A10 correction controller: 1 pc\u003c\/li\u003e\n          \u003cli\u003ePD-803L200 servo actuator: 1 pc\u003c\/li\u003e\n          \u003cli\u003eUS-500 ultrasonic sensor: 1 pc\u003c\/li\u003e\n          \u003cli\u003e100-240V AC input power supply: 1 pc\u003c\/li\u003e\n          \u003cli\u003eConnecting cables: 3 pcs\u003c\/li\u003e\n          \u003cli\u003eBracket mount: 1 pc\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"box\"\u003e\n        \u003ch3\u003eBest-Fit Use\u003c\/h3\u003e\n        \u003cp\u003eUse this servo web guide controller set when a production line needs automatic edge-following, line-following, or center-alignment correction for moving web materials. The listed applications include paper and packaging converting systems such as bag-making machines, box-making machines, slitters, cutters, copy paper machines, rollers, winders, feeders, and conveyors.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003ch3\u003eController and System Features\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eThree operating modes: edge-following, line-following, and center-alignment.\u003c\/li\u003e\n      \u003cli\u003eSupports ultrasonic, photoelectric, color mark, and CCD sensor configurations. This set includes the US-500 ultrasonic sensor.\u003c\/li\u003e\n      \u003cli\u003eHigh-speed 32-bit CPU with DC servo driver control.\u003c\/li\u003e\n      \u003cli\u003eNo-overshoot integral variable PI algorithm for fast deviation correction.\u003c\/li\u003e\n      \u003cli\u003eAutomatic travel measurement, reducing the need for a mechanical limit switch.\u003c\/li\u003e\n      \u003cli\u003e0.5 ms PWM response time.\u003c\/li\u003e\n      \u003cli\u003e12-bit AD sampling at 700,000 samples per second.\u003c\/li\u003e\n      \u003cli\u003eFIR digital filtering and return difference filtering for more stable signal handling.\u003c\/li\u003e\n      \u003cli\u003eStores 10 groups of parameters for material changeover.\u003c\/li\u003e\n      \u003cli\u003eSupports Modbus and PLC\/HMI networking control.\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003ch3\u003eKey Specifications\u003c\/h3\u003e\n    \u003ctable style=\"border-collapse:collapse;border:1px solid #dddddd\" border=\"1\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eController model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEPC-A10\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl method\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC servo driver\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eController power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC 24V \/ 5A\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC 0-5A\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24V\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePWM response time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.5 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnvironment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-10 to 60C, below RH90%\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eController weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n\n    \u003ch3\u003eIncluded US-500 Ultrasonic Sensor\u003c\/h3\u003e\n    \u003ctable style=\"border-collapse:collapse;border:1px solid #dddddd\" border=\"1\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUS-500\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC 12V\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC 0-5V\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetection range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetection accuracy\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetection method\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUltrasonic exposure\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShell material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n\n    \u003ch3\u003ePD-803L200 Servo Actuator\u003c\/h3\u003e\n    \u003ctable style=\"border-collapse:collapse;border:1px solid #dddddd\" border=\"1\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePD-803L200\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTravel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThrust\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e800kg\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePushing load\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8000kg\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum driving speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n\n    \u003ch3\u003eSensor Options\u003c\/h3\u003e\n    \u003cp\u003eThis product is standardly supplied with the US-500 ultrasonic sensor. Photoelectric sensor, color mark sensor, and CCD sensor configurations are optional. Contact FMF Supply before ordering if your line requires a different sensor configuration.\u003c\/p\u003e\n\n    \u003ch3\u003eFAQ\u003c\/h3\u003e\n    \u003ch4\u003eWhat does this EPC-A10 web guide system control?\u003c\/h4\u003e\n    \u003cp\u003eIt controls web edge, printed line, or center position deviation by using the sensor signal, EPC-A10 controller, and PD-803L200 actuator to correct the moving material path.\u003c\/p\u003e\n    \u003ch4\u003eWhich sensor is included in this set?\u003c\/h4\u003e\n    \u003cp\u003eThe standard set includes one US-500 ultrasonic sensor. Other sensor types are optional and should be confirmed before ordering.\u003c\/p\u003e\n    \u003ch4\u003eWhat actuator is included?\u003c\/h4\u003e\n    \u003cp\u003eThis configuration includes the PD-803L200 servo actuator with 200mm travel and 800kg thrust.\u003c\/p\u003e\n    \u003ch4\u003eCan this be used for packaging converting lines?\u003c\/h4\u003e\n    \u003cp\u003eYes. The listed applications include paper and packaging converting equipment such as bag-making machines, box-making machines, slitters, cutters, rollers, winders, feeders, and conveyors.\u003c\/p\u003e\n\n    \u003cp\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 servo web guide system with PD-803L200 actuator and US-500 ultrasonic sensor detail image 1\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S5bff1e405c634361aff9094f09d18559U.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 edge line position controller detail image 2\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S43b667435a3d4f04b9729c817acecf2ba.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"PD-803L200 800kg 200mm web guide actuator detail image 3\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S6c10ffc648264322ac8ff084eecbae48P.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"US-500 ultrasonic web edge sensor detail image 4\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S303cdb617d06400c8b1d2676da43fd52J.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 servo web guide controller system detail image 5\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sa060bac1214142f098ea2149304531031.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 web guiding system component detail image 6\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S0f0a4a11c2f34b95beccaa9ec5fc9378c.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 controller and web guide actuator detail image 7\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S4c352599474440d78e96b794ddbb9733t.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"Servo edge position control system detail image 8\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S2786be71298f495f86a466c3800a1e1aj.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"Line edge position web guide controller detail image 9\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S25054d74c01f404fb46ae7b9c89eccf7j.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 web guide system specification detail image 10\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S3d45a48911f748e68eaa193f7b944984y.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"US-500 ultrasonic sensor web guide application detail image 11\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S9335aa4fa8b44eb8aac3350561a0ee49Q.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"PD-803L200 actuator web guiding system detail image 12\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/Se6ece7d1baa34ef799f7338cf55cc492U.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 servo web guide system installation detail image 13\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sba479793555a45899ba4255fe5e39f0fH.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 edge and line position control system detail image 14\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sd29fdd9f9b314058bcf69cfff6689399Y.jpg\"\u003e\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"FMF","offers":[{"title":"Predvolený názov","offer_id":43370967203929,"sku":"FMF-EPC-A10-12569","price":1152.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S6c10ffc648264322ac8ff084eecbae48P.webp?v=1780391158"},{"product_id":"pg200a-all-in-one-servo-web-guiding-system-epc-edge-line-position-controller-with-ultrasonic-sensor","title":"PG200A All-in-One Servo Web Guide with Ultrasonic Sensor","description":"\u003csection\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe PG200A is an all-in-one servo web guiding system for edge and line position control on narrow web materials. It integrates the controller, driver, detector, and servo guide structure in a compact unit, with the default configuration including a US-400S ultrasonic sensor.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003ePackage Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 set PG200A all-in-one web guide system\u003c\/li\u003e\n\u003cli\u003eUS-400S ultrasonic sensor in the default configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf another sensor type is required, confirm the configuration before ordering.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eKey Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for accurate correction of narrow web materials.\u003c\/li\u003e\n\u003cli\u003eSuitable for label printing, packaging, and non-woven material guiding applications.\u003c\/li\u003e\n\u003cli\u003eBrushless DC servo motor drive for low-maintenance operation.\u003c\/li\u003e\n\u003cli\u003ePrecision ball screw mechanism for accurate positioning.\u003c\/li\u003e\n\u003cli\u003eCompact integrated design helps save installation space and reduce setup work.\u003c\/li\u003e\n\u003cli\u003eRoller length, width, and surface treatment can be customized for the application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003ePG200A Technical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePG-200A \/ PG200A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC220V \/ AC110V, 80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive\u003c\/td\u003e\n\u003ctd\u003eBrushless DC servo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller length A\u003c\/td\u003e\n\u003ctd\u003e200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller diameter B\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller width C\u003c\/td\u003e\n\u003ctd\u003e230 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase length D\u003c\/td\u003e\n\u003ctd\u003e255 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeb guide range\u003c\/td\u003e\n\u003ctd\u003e+\/-12 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. tension\u003c\/td\u003e\n\u003ctd\u003e300 N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. speed\u003c\/td\u003e\n\u003ctd\u003e40 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironment\u003c\/td\u003e\n\u003ctd\u003e-10 to 60 degree C, below RH 90%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eUS-400S Ultrasonic Sensor Parameters\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor model\u003c\/td\u003e\n\u003ctd\u003eUS-400S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eDC 12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput signal\u003c\/td\u003e\n\u003ctd\u003eDC 0-5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDetection range\u003c\/td\u003e\n\u003ctd\u003e8 mm (+\/-4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDetection accuracy\u003c\/td\u003e\n\u003ctd\u003e0.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDetection method\u003c\/td\u003e\n\u003ctd\u003eUltrasonic reflection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency\u003c\/td\u003e\n\u003ctd\u003e100 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing material\u003c\/td\u003e\n\u003ctd\u003eAluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSelection Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse PG200A when the 200 mm roller length, 230 mm roller width, and 300 N maximum tension match the web material and machine layout.\u003c\/li\u003e\n\u003cli\u003eChoose an ultrasonic sensor when edge detection needs to work with materials where optical contrast may be limited.\u003c\/li\u003e\n\u003cli\u003eConfirm voltage, web width, roller surface, installation space, and sensor type before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat does the PG200A system include?\u003c\/h3\u003e\n\u003cp\u003eThe default configuration is one PG200A all-in-one servo web guide system with a US-400S ultrasonic sensor.\u003c\/p\u003e\n\u003ch3\u003eWhat materials is it intended for?\u003c\/h3\u003e\n\u003cp\u003eIt is intended for narrow web material guiding, including label printing, packaging, and non-woven material applications when the machine requirements match the listed specifications.\u003c\/p\u003e\n\u003ch3\u003eCan the roller size or surface be customized?\u003c\/h3\u003e\n\u003cp\u003eThe product information supports custom roller length, width, and surface treatment. Confirm the required dimensions and surface before ordering.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Predvolený názov","offer_id":43370967269465,"sku":"FMF-PG200A-78105","price":979.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sf1559b53618c4ce094ad7deae9c41208u.webp?v=1780391160"},{"product_id":"us-400s-ultrasonic-web-guide-sensor-epc-edge-detection","title":"US-400S Ultrazvukový snímač vedenia pásu pre detekciu okraja EPC","description":"\u003ch2\u003eUS-400S štrbinový ultrazvukový snímač vedenia pásu\u003c\/h2\u003e\n\u003cp\u003eSnímač US-400S je štrbinový ultrazvukový snímač určený pre systémy vedenia pásu EPC. Využíva ultrazvukovú protismernú detekciu na identifikáciu polohy okraja materiálu privádzaného z roliek a vysiela korekčné signály do riadiacej jednotky vedenia pásu.\u003c\/p\u003e\n\u003ch2\u003eKľúčové údaje\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eUS-400S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTyp snímača\u003c\/th\u003e\n\u003ctd\u003eŠtrbinový ultrazvukový snímač vedenia pásu\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSpôsob sledovania\u003c\/th\u003e\n\u003ctd\u003eSledovanie protiľahlého okraja\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePoužitie\u003c\/th\u003e\n\u003ctd\u003eDetekcia okraja pre systémy vedenia pásu EPC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNapájanie\u003c\/th\u003e\n\u003ctd\u003eDC12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVýstupný signál\u003c\/th\u003e\n\u003ctd\u003e0-5V analógový výstup a dvojkanálový NPN spínací výstup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDetekčný rozsah\u003c\/th\u003e\n\u003ctd\u003e6 mm, +\/-3.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePresnosť detekcie\u003c\/th\u003e\n\u003ctd\u003e+\/-0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMetóda detekcie\u003c\/th\u003e\n\u003ctd\u003e200K ultrazvuková protismerná detekcia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eReferenčné zapojenie\u003c\/th\u003e\n\u003ctd\u003eHnedý +12V, modrý GND, biely 0-5VDC, čierny NPN1, sivý NPN2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eReferenčné SKU\u003c\/th\u003e\n\u003ctd\u003eFMF-US-400S-43641\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eVhodnosť materiálu\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVhodný pre vzduchotesné kotúčové materiály, ako sú priehľadná fólia a papier.\u003c\/li\u003e\n\u003cli\u003eNevhodný pre priedušné materiály, ako je plátno alebo netkaná textília.\u003c\/li\u003e\n\u003cli\u003eUžitočný v prípadoch, keď sú fotoelektrické snímače ovplyvnené správaním priehľadného materiálu.\u003c\/li\u003e\n\u003cli\u003ePo nastavení nie je počas bežnej prevádzky potrebná žiadna rutinná manuálna kalibrácia.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePrevádzkové poznámky\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSnímač podporuje jeden analógový výstup a dva spínacie výstupy.\u003c\/li\u003e\n\u003cli\u003eK dispozícii sú tri režimy presnosti: 0.5 mm, 1.0 mm a 2.0 mm.\u003c\/li\u003e\n\u003cli\u003ePomocou tlačidla SET vyberte požadovaný režim a po kalibrácii nastavenie uložte.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eNa čo slúži US-400S?\u003c\/h3\u003e\n\u003cp\u003eDetekuje polohu okraja materiálu v systéme vedenia pásu EPC, aby riadiaca jednotka mohla korigovať vedenie pásu.\u003c\/p\u003e\n\u003ch3\u003ePrečo použiť ultrazvukový snímač okraja namiesto fotoelektrického?\u003c\/h3\u003e\n\u003cp\u003ePri priehľadných vzduchotesných materiáloch je ultrazvuková detekcia okraja menej ovplyvnená priehľadnosťou materiálu ako fotoelektrický snímač.\u003c\/p\u003e\n\u003ch3\u003eDá sa použiť s netkanou textíliou?\u003c\/h3\u003e\n\u003cp\u003eNie. Priedušné materiály, ako je plátno a netkaná textília, nie sú vhodné.\u003c\/p\u003e\n\u003ch3\u003eČo by som mal overiť pred objednaním?\u003c\/h3\u003e\n\u003cp\u003eOverte, či váš regulátor akceptuje napájanie DC12V, analógový výstup 0-5V a uvedené NPN spínacie výstupy, a skontrolujte polohu montáže snímača vzhľadom na váš súčasný systém vedenia pásu.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S1a285d5605294a5c939bf5d836a8927cb.png\" height=\"auto\" width=\"750\" loading=\"lazy\" decoding=\"async\" alt=\"US-400S ultrasonic web guide sensor outline dimensions\" style=\"max-width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Predvolený názov","offer_id":43370967335001,"sku":"FMF-US-400S-43641","price":70.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sb93812418f6b47c4bb53fcdd4191fefdT.webp?v=1780391162"},{"product_id":"ktc812-semi-automatic-tension-controller-with-hall-sensor-coil-tension-magnetic-powder-brake-clutch-torque-control","title":"KTC812 Semi-Automatic Taper Tension Controller for Magnetic Powder Brake\/Clutch","description":"\u003csection\u003e\n\u003ch2\u003eKTC812 Semi-Automatic Taper Tension Controller\u003c\/h2\u003e\n\u003cp\u003eThe KTC812 is a semi-automatic coil diameter tension controller for reeling, winding, and web tension control systems that use a magnetic powder brake or magnetic powder clutch. It calculates coil radius change from a compatible encoder or proximity switch input, then adjusts the tension output for constant tension or taper tension control.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eMain Functions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eManual or automatic operation for coil winding and reeling control.\u003c\/li\u003e\n\u003cli\u003eAdjustable torque compensation for magnetic powder brake or clutch applications.\u003c\/li\u003e\n\u003cli\u003eAutomatic coil radius calculation from encoder or proximity switch input.\u003c\/li\u003e\n\u003cli\u003eConstant tension and taper tension control for roll-to-roll material handling.\u003c\/li\u003e\n\u003cli\u003eStores parameters for up to 9 different materials.\u003c\/li\u003e\n\u003cli\u003eAutomatic memory of system parameters and status.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eKTC812\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eController type\u003c\/th\u003e\n\u003ctd\u003eSemi-automatic taper tension controller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower input\u003c\/th\u003e\n\u003ctd\u003eAC100-264V, 50-60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl output\u003c\/th\u003e\n\u003ctd\u003eDC0-24V \/ 4A for magnetic powder clutch or brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput signal\u003c\/th\u003e\n\u003ctd\u003eSpindle pulse signal, compatible with encoder or proximity switch; winding diameter reset signal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAuxiliary power\u003c\/th\u003e\n\u003ctd\u003eDC24V for proximity switch or encoder power supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl method\u003c\/th\u003e\n\u003ctd\u003eThickness accumulation method\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eFMF-KTC812-47577\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eParameter Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInitial radius\u003c\/li\u003e\n\u003cli\u003eMaterial thickness\u003c\/li\u003e\n\u003cli\u003eTaper coefficient\u003c\/li\u003e\n\u003cli\u003eStarting compensation point\u003c\/li\u003e\n\u003cli\u003eCompensation coefficient\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is the KTC812 used for?\u003c\/h3\u003e\n\u003cp\u003eIt is used to control coil or web tension in winding and reeling systems, especially where magnetic powder brakes or clutches are used for torque control.\u003c\/p\u003e\n\u003ch3\u003eCan it work with an encoder or proximity switch?\u003c\/h3\u003e\n\u003cp\u003eYes. The listed input supports a spindle pulse signal compatible with an encoder or proximity switch, plus a winding diameter reset signal.\u003c\/p\u003e\n\u003ch3\u003eWhat output does it provide for the brake or clutch?\u003c\/h3\u003e\n\u003cp\u003eThe controller output is DC0-24V \/ 4A for a magnetic powder clutch or brake, with overcurrent protection listed in the product data.\u003c\/p\u003e\n\u003ch3\u003eWhat should I confirm before ordering?\u003c\/h3\u003e\n\u003cp\u003eConfirm your brake or clutch current requirement, signal type, machine wiring, installation space, and whether your system uses the same coil-diameter tension control method.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Predvolený názov","offer_id":43370970447961,"sku":"FMF-KTC812-47577","price":66.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S4915f8d237fe4e9da61189ea90f3f3fcx.webp?v=1780391213"},{"product_id":"ps-260-reflective-color-mark-sensor-tracking-photoelectric-eye-applied-with-epc-a10-epc-d12-web-guiding-controller","title":"PS-260 Reflective Color Mark Sensor Photoelectric Eye","description":"\u003csection\u003e\n\u003ch2\u003ePS-260 Reflective Color Mark Sensor for Web Guiding\u003c\/h2\u003e\n\u003cp\u003eThe PS-260 is a reflective color mark sensor \/ photoelectric eye for mark tracking in web guiding setups. It is designed for use with EPC-A10 and EPC-D12 web guiding controllers.\u003c\/p\u003e\n\u003cp\u003eThis product includes one PS-260 sensor and one cable. The EPC controller is not included.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReflective color mark sensor \/ photoelectric eye for tracking marks on moving web materials.\u003c\/li\u003e\n\u003cli\u003eIntelligent red, green, and blue light source selection.\u003c\/li\u003e\n\u003cli\u003eSmart calibration without potentiometer adjustment.\u003c\/li\u003e\n\u003cli\u003eTracking methods listed: edge, pair tracking, and same color.\u003c\/li\u003e\n\u003cli\u003eApplied with EPC-A10 \/ EPC-D12 web guiding controller setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003ePS-260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower Input\u003c\/th\u003e\n\u003ctd\u003eDC10V-30V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOutput Signal\u003c\/th\u003e\n\u003ctd\u003eAnalog 0-5V \/ switching signal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDetection Range\u003c\/th\u003e\n\u003ctd\u003e9mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDetection Accuracy\u003c\/th\u003e\n\u003ctd\u003e0.01mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDetection Method\u003c\/th\u003e\n\u003ctd\u003ePhotoelectric radiation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eResponse Frequency\u003c\/th\u003e\n\u003ctd\u003e10K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShell Material\u003c\/th\u003e\n\u003ctd\u003eAluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection Level\u003c\/th\u003e\n\u003ctd\u003eIP64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e170g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003ePackage Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePS-260 sensor: 1 pc\u003c\/li\u003e\n\u003cli\u003eCable: 1 pc\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is the PS-260 used for?\u003c\/h3\u003e\n\u003cp\u003eIt is used as a reflective color mark sensor \/ photoelectric eye for mark tracking in web guiding or correction setups.\u003c\/p\u003e\n\u003ch3\u003eWhich controller is it designed for?\u003c\/h3\u003e\n\u003cp\u003ethis product is used with EPC-A10 and EPC-D12 web guiding controllers.\u003c\/p\u003e\n\u003ch3\u003eWhat power input does it use?\u003c\/h3\u003e\n\u003cp\u003eThe listed power input is DC10V-30V.\u003c\/p\u003e\n\u003ch3\u003eWhat is included?\u003c\/h3\u003e\n\u003cp\u003eOne PS-260 sensor and one cable are included. The controller is not included.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cp\u003e\n\u003cimg alt=\"PS-260 reflective color mark sensor photoelectric eye for EPC-A10 EPC-D12 web guiding detail image 1\" src=\"https:\/\/ae01.alicdn.com\/kf\/S9ac1212c6a9e44b09e1092de9c5c8ce4F.jpg\"\u003e\n\u003cimg alt=\"PS-260 color mark sensor DC10-30V specification detail image 2\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sdb731967c4af4b9cbd59038194067102D.jpg\"\u003e\n\u003cimg alt=\"PS-260 photoelectric eye analog 0-5V switching output detail image 3\" src=\"https:\/\/ae01.alicdn.com\/kf\/S947b3eb22d3844abb3292d75b8cfe360l.jpg\"\u003e\n\u003cimg alt=\"PS-260 web guide sensor package with cable detail image 4\" src=\"https:\/\/ae01.alicdn.com\/kf\/S81e758fb2e9e453191bd5d606e09b6623.jpg\"\u003e\n\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Predvolený názov","offer_id":43370970480729,"sku":"FMF-PS-260-80345","price":120.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/6d0f95cb-ddaf-4d83-b8e9-40f82fb36a80.png?v=1781285718"},{"product_id":"us-400s-ultrasonic-edge-sensor-web-alignment","title":"US-400S Ultrasonic Edge Sensor for Web Alignment, DC12V","description":"\u003ch2\u003eUS-400S ultrasonic edge sensor for web alignment\u003c\/h2\u003e\n\u003cp\u003eThe US-400S is an ultrasonic edge sensor for web alignment, edge correction and EPC\/LPC guiding systems. It detects the edge position of rolled material with ultrasonic sensing, so transparent material is easier to handle than with photoelectric sensing.\u003c\/p\u003e\n\n\u003ch3\u003eBest-fit use\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEdge tracking for rolled web material.\u003c\/li\u003e\n  \u003cli\u003eWeb alignment and edge correction on EPC\/LPC guide systems.\u003c\/li\u003e\n  \u003cli\u003eNon-breathable materials such as plastic film, transparent film and paper.\u003c\/li\u003e\n  \u003cli\u003eApplications that need 0-5V analog output and dual-channel switch output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUltrasonic edge detection:\u003c\/strong\u003e Detects rolled material edge position without relying on material transparency.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDC12V power input:\u003c\/strong\u003e Designed for DC12V power. Do not connect AC220V.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e0-5V analog output:\u003c\/strong\u003e Includes analog output for edge-position signal use.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual switch output:\u003c\/strong\u003e Supports dual-channel switch output; the product label shows NPN x2 digital output.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6 mm detection range:\u003c\/strong\u003e Detection range is 6 mm (+\/-3.0 mm).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e0.05 mm detection accuracy:\u003c\/strong\u003e Built for precise web edge tracking.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePosition indicator:\u003c\/strong\u003e Built-in position indicator and setup button for adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eUS-400S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eUltrasonic edge sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eTracking method\u003c\/th\u003e\n\u003ctd\u003eEdge tracking\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower input\u003c\/th\u003e\n\u003ctd\u003eDC 12V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eAnalog output\u003c\/th\u003e\n\u003ctd\u003e0-5V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eDigital output\u003c\/th\u003e\n\u003ctd\u003eDual-channel switch signal \/ NPN x2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eDetection range\u003c\/th\u003e\n\u003ctd\u003e6 mm (+\/-3.0 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eDetection accuracy\u003c\/th\u003e\n\u003ctd\u003e+\/-0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eUltrasonic transmission\u003c\/th\u003e\n\u003ctd\u003e200K\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan rate\u003c\/th\u003e\n\u003ctd\u003e1 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eIP54\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWiring reference\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eAOUT\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003e+12V\u003c\/th\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eDOUT2\u003c\/th\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eDOUT1\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eGND\u003c\/th\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOrdering notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eUse DC12V power only. Do not connect AC220V.\u003c\/li\u003e\n  \u003cli\u003eThis sensor is intended for non-breathable materials such as plastic film, transparent film and paper.\u003c\/li\u003e\n  \u003cli\u003eFor breathable materials such as fabrics or non-wovens, contact us before ordering.\u003c\/li\u003e\n  \u003cli\u003eFor system compatibility or connector details, contact us before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat materials is the US-400S edge sensor best for?\u003c\/h4\u003e\n\u003cp\u003eIt is best for non-breathable web materials such as plastic film, transparent film and paper.\u003c\/p\u003e\n\n\u003ch4\u003eCan it work with transparent film?\u003c\/h4\u003e\n\u003cp\u003eYes. The ultrasonic sensing method is not affected by material transparency in the same way as a photoelectric sensor.\u003c\/p\u003e\n\n\u003ch4\u003eWhat output signals does it provide?\u003c\/h4\u003e\n\u003cp\u003eIt provides 0-5V analog output and dual-channel switch output. The product label also shows NPN x2 digital output.\u003c\/p\u003e\n\n\u003ch4\u003eWhat is the detection range and accuracy?\u003c\/h4\u003e\n\u003cp\u003eThe detection range is 6 mm (+\/-3.0 mm), and the detection accuracy is +\/-0.05 mm.\u003c\/p\u003e\n\n\u003ch4\u003eCan I use it with AC220V?\u003c\/h4\u003e\n\u003cp\u003eNo. Use DC12V power only. Do not connect AC220V.\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Predvolený názov","offer_id":43370970710105,"sku":"FMF-US-400S-78649","price":73.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sc3664d99447b40089c15064be3f8d0618.webp?v=1780391217"},{"product_id":"ps-400s-photoelectric-edge-sensor-cable-epc-lpc-web-guide","title":"PS-400S Photoelectric Edge Sensor with Cable for EPC\/LPC Web Guide","description":"\u003ch2\u003ePS-400S photoelectric edge sensor for web guiding\u003c\/h2\u003e\n\u003cp\u003eThe PS-400S is a photoelectric slot edge sensor supplied with a cable for EPC and LPC web guide systems. It is used to detect the edge position of roll or web materials so the guiding controller can keep the material aligned during converting, packaging, printing, laminating, slitting, or similar web-handling work.\u003c\/p\u003e\n\u003ch2\u003eKey details\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003ePS-400S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSensor type\u003c\/th\u003e\n\u003ctd\u003ePhotoelectric slot edge sensor \/ through-beam edge sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eEdge tracking for EPC \/ LPC web guide systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIncluded item\u003c\/th\u003e\n\u003ctd\u003e1 pc PS-400S sensor with cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower input\u003c\/th\u003e\n\u003ctd\u003eDC 10-30V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSignal output\u003c\/th\u003e\n\u003ctd\u003eAnalog 0-5V and NPN on\/off signal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDetection range\u003c\/th\u003e\n\u003ctd\u003e8 mm, +\/-4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDetection precision\u003c\/th\u003e\n\u003ctd\u003e+\/-0.02 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection level\u003c\/th\u003e\n\u003ctd\u003eIP54\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHousing\u003c\/th\u003e\n\u003ctd\u003eAluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhere it fits\u003c\/h2\u003e\n\u003cp\u003eThis sensor is intended for edge-position detection in web guiding and web alignment systems. It is a practical replacement or spare sensor when the machine requires a PS-400S photoelectric edge sensor with cable for EPC\/LPC correction control.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm that your controller or machine accepts the PS-400S signal type and wiring.\u003c\/li\u003e\n\u003cli\u003eCheck the working material and edge-tracking method against your existing web guide setup.\u003c\/li\u003e\n\u003cli\u003eCompare the connector, cable routing, and mounting position with the sensor currently installed on your machine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs this the US-400S ultrasonic sensor?\u003c\/h3\u003e\n\u003cp\u003eNo. This product is for the PS-400S photoelectric edge sensor. If your application needs an ultrasonic edge sensor, check the model on your current sensor before ordering.\u003c\/p\u003e\n\u003ch3\u003eCan it be used for EPC and LPC systems?\u003c\/h3\u003e\n\u003cp\u003eYes. The PS-400S is listed here for EPC \/ LPC web guide systems, where the sensor detects the material edge for correction control.\u003c\/p\u003e\n\u003ch3\u003eWhat is included?\u003c\/h3\u003e\n\u003cp\u003ePackage includes 1 pc PS-400S photoelectric slot sensor with cable.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"PS-400S photoelectric edge sensor with cable for EPC LPC web guide system detail image 1\" decoding=\"async\" fetchpriority=\"low\" loading=\"lazy\" slate-data-type=\"image\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sd3e7e97c27e2441588bb89cb9f80c6bcz.jpg\" style=\"max-width: 100%; height: auto;\"\u003e\u003cimg alt=\"PS-400S photoelectric slot edge sensor for web guide system detail image 2\" decoding=\"async\" fetchpriority=\"low\" loading=\"lazy\" slate-data-type=\"image\" src=\"https:\/\/ae01.alicdn.com\/kf\/S01979b7825ef40969af2c7c8f727e4aeU.jpg\" style=\"max-width: 100%; height: auto;\"\u003e\u003cimg alt=\"PS-400S edge tracking photoelectric sensor cable connection detail image 3\" decoding=\"async\" fetchpriority=\"low\" loading=\"lazy\" slate-data-type=\"image\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sa4af2043d62c48c391d01b87350bec5a4.jpg\" style=\"max-width: 100%; height: auto;\"\u003e\u003cimg alt=\"PS-400S photoelectric edge sensor dimensions and mounting detail image 4\" decoding=\"async\" fetchpriority=\"low\" loading=\"lazy\" slate-data-type=\"image\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sd0a5c83e922642bdbcb4cae6564c9844G.jpg\" style=\"max-width: 100%; height: auto;\"\u003e\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Predvolený názov","offer_id":43370970972249,"sku":"FMF-PS-400S-40793","price":83.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sd3e7e97c27e2441588bb89cb9f80c6bcz.webp?v=1780391225"},{"product_id":"ktc838a-automatic-tension-controller-radius-taper-tension-control-2pcs-ts200-50-tension-detector","title":"KTC838A Automatický regulátor napätia s detektormi TS200-50","description":"\u003csection\u003e\n\u003ch2\u003ePrehľad produktu\u003c\/h2\u003e\n\u003cp\u003eAutomatický regulátor napätia KTC838A je digitálny regulátor napätia pásu pre zariadenia na spracovanie kotúčových materiálov. Súprava obsahuje jeden regulátor KTC838A, dva detektory napätia TS200-50 50kg a káble na vytvorenie systému regulácie napätia s magnetickými práškovými brzdami, magnetickými práškovými spojkami, meničmi, servomotormi alebo inými kompatibilnými akčnými členmi.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eObsah balenia\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 ks automatický regulátor napätia KTC838A\u003c\/li\u003e\n\u003cli\u003e2 ks detektory napätia TS200-50 50kg\u003c\/li\u003e\n\u003cli\u003eKáble\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eKľúčové vlastnosti\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUmožňuje reguláciu napätia v uzavretej slučke so spätnou väzbou z detektora napätia.\u003c\/li\u003e\n\u003cli\u003eUmožňuje reguláciu napätia v otvorenej slučke s výpočtom polomeru pomocou indukčného snímača alebo enkodéra.\u003c\/li\u003e\n\u003cli\u003ePoskytuje funkcie regulácie napätia podľa polomeru a kužeľovej regulácie napätia pre procesy navíjania a odvíjania.\u003c\/li\u003e\n\u003cli\u003ePoužíva grafický LCD displej s podporou čínštiny a angličtiny.\u003c\/li\u003e\n\u003cli\u003ePodporuje prepínanie medzi automatickým a manuálnym režimom, prepínanie dvojosí a kompenzáciu zrýchlenia\/spomalenia.\u003c\/li\u003e\n\u003cli\u003ePodporuje štandardnú komunikáciu Modbus pre integráciu s PLC alebo dotykovým panelom po zapojení a nakonfigurovaní pre danú aplikáciu.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eTechnické špecifikácie\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003ePoložka\u003c\/th\u003e\n\u003cth\u003eŠpecifikácia\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel regulátora\u003c\/td\u003e\n\u003ctd\u003eKTC838A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodávané detektory\u003c\/td\u003e\n\u003ctd\u003e2 ks detektory napätia TS200-50 50kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNapájanie\u003c\/td\u003e\n\u003ctd\u003e100-264VAC, 50\/60Hz, 100W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNapájanie detektorov\u003c\/td\u003e\n\u003ctd\u003eDC 10V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVstup detektora\u003c\/td\u003e\n\u003ctd\u003eDva signálové vstupy z detektorov napätia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRiadiaci výstup\u003c\/td\u003e\n\u003ctd\u003eDC 0-10V pre riadenie meniča, serva, zosilňovača alebo kompatibilného akčného člena\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVýstup pre brzdu\/spojku\u003c\/td\u003e\n\u003ctd\u003eDC 0-24V, menej ako 4A, pre riadenie kompatibilnej magnetickej práškovej brzdy alebo spojky\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalógový výstup\u003c\/td\u003e\n\u003ctd\u003eVýstup 4-20mA pre riadenie kompatibilného pohonu alebo akčného člena\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTeplota okolia\u003c\/td\u003e\n\u003ctd\u003e-10 až 40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVlhkosť\u003c\/td\u003e\n\u003ctd\u003e35–85% RH, bez kondenzácie\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKomunikácia\u003c\/td\u003e\n\u003ctd\u003eŠtandardný komunikačný protokol Modbus\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003ePoznámky k aplikácii\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePoužite detektory TS200-50, keď rozsah napätia pásu zodpovedá konfigurácii detektora 50kg.\u003c\/li\u003e\n\u003cli\u003ePoužite reguláciu v uzavretej slučke, keď je potrebná priama spätná väzba napätia zo snímačov alebo tenzometrov.\u003c\/li\u003e\n\u003cli\u003ePoužite reguláciu podľa polomeru alebo kužeľovú reguláciu, keď stroj vyžaduje kompenzáciu napätia pri zmene priemeru kotúča.\u003c\/li\u003e\n\u003cli\u003ePred objednaním overte požadovaný výstup akčného člena: magnetická prášková brzda alebo spojka, menič, servomotor, zosilňovač alebo iné kompatibilné riadiace zariadenie.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eČo je súčasťou tejto ponuky KTC838A?\u003c\/h3\u003e\n\u003cp\u003eTáto ponuka obsahuje jeden automatický regulátor napätia KTC838A, dva detektory napätia TS200-50 50kg a káble.\u003c\/p\u003e\n\u003ch3\u003eDá sa použiť na reguláciu napätia v uzavretej aj otvorenej slučke?\u003c\/h3\u003e\n\u003cp\u003eÁno. Regulátor môže pracovať so spätnou väzbou z detektora napätia pre reguláciu v uzavretej slučke, alebo vypočítavať napätie pomocou indukčného snímača či enkodéra pre reguláciu v otvorenej slučke podľa polomeru, ak je stroj takto nakonfigurovaný.\u003c\/p\u003e\n\u003ch3\u003eČo by som mal overiť pred objednaním?\u003c\/h3\u003e\n\u003cp\u003eOverte rozsah napätia pásu, kapacitu detektora, prúd brzdy alebo spojky, riadiaci signál akčného člena, spôsob zapojenia a či váš stroj vyžaduje reguláciu podľa polomeru, kužeľovú, v uzavretej alebo otvorenej slučke.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Default Title","offer_id":43370971758681,"sku":"FMF-KTC838A-99545","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S249b6666bd234110b98d5fe694fd5356J.webp?v=1780391242"},{"product_id":"epc-a10-web-guiding-system-kit-ps260-pd204l150t","title":"EPC-A10 Web Guiding System Kit with PS260 Color Mark Sensor PD-204L150T Actuator","description":"\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThe EPC-A10 web guiding system kit is built for edge and line position control. The kit combines an EPC-A10 controller, PS260-H RGB color mark sensor, PD204L150T servo linear actuator, 24V power supply, connection cables, and mounting hardware.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eEPC-A10 servo edge position control system for edge-following, line-following, and center-alignment operation modes.\u003c\/li\u003e\n  \u003cli\u003eController supply: DC24V; controller power label: 100W.\u003c\/li\u003e\n  \u003cli\u003eRear controller interfaces include Power DC24V, Servo Motor, Detector, EX Port, MC Port, RS485, 0-10V, and OUT terminals.\u003c\/li\u003e\n  \u003cli\u003ePS260-H RGB color mark sensor with auto tuning and DC10-30V sensor supply labeling.\u003c\/li\u003e\n  \u003cli\u003ePD204L150T precision linear actuator with 150 mm travel, 200 kg thrust, 40 mm\/s speed, and linear position encoder labeling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eKit model\u003c\/th\u003e\n\u003ctd\u003eEPC-A10 with PS260-H sensor and PD204L150T actuator\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eController model\u003c\/th\u003e\n\u003ctd\u003eEPC-A10 edge\/line position controller\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eController supply\u003c\/th\u003e\n\u003ctd\u003eDC24V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eController power\u003c\/th\u003e\n\u003ctd\u003e100W\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOperation modes\u003c\/th\u003e\n\u003ctd\u003eEdge-following, line-following, center-alignment\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eController ports\u003c\/th\u003e\n\u003ctd\u003ePower DC24V, Servo Motor, Detector, EX Port\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTerminal signals\u003c\/th\u003e\n\u003ctd\u003eMC Port, RS485, 0-10V, OUT\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSensor model\u003c\/th\u003e\n\u003ctd\u003ePS260-H \/ PS260 RGB emission color mark sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSensor supply label\u003c\/th\u003e\n\u003ctd\u003eDC10-30V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eActuator model\u003c\/th\u003e\n\u003ctd\u003ePD204L150T\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eActuator travel\u003c\/th\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eActuator thrust\u003c\/th\u003e\n\u003ctd\u003e200 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eActuator speed\u003c\/th\u003e\n\u003ctd\u003e40 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePosition feedback\u003c\/th\u003e\n\u003ctd\u003eLinear position encoder\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct weight\u003c\/th\u003e\n\u003ctd\u003e12 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eEPC-A10 controller\u003c\/li\u003e\n  \u003cli\u003ePS260-H RGB color mark sensor with cable\u003c\/li\u003e\n  \u003cli\u003ePD204L150T servo linear actuator with cable\u003c\/li\u003e\n  \u003cli\u003e24V power supply\u003c\/li\u003e\n  \u003cli\u003eMounting fixture and connection hardware\u003c\/li\u003e\n  \u003cli\u003eConnection cables\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eManuals and Drawings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/epc-a10-edge-line-position-controller-manual.pdf?v=1782826099\" target=\"_blank\" rel=\"noopener\"\u003eEPC-A10 edge line position controller manual PDF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/pd204l150-servo-linear-actuator-dimension-drawing.pdf?v=1782826100\" target=\"_blank\" rel=\"noopener\"\u003ePD204L150 servo linear actuator dimension drawing PDF\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat actuator is included?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a PD204L150T servo linear actuator with 150 mm travel, 200 kg thrust, and 40 mm\/s speed.\u003c\/p\u003e\n\u003ch3\u003eWhat sensor is included?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a PS260-H RGB color mark sensor for color mark detection in the web guiding system.\u003c\/p\u003e\n\u003ch3\u003eWhat controller supply voltage is required?\u003c\/h3\u003e\n\u003cp\u003eThe EPC-A10 controller is labeled for DC24V supply.\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Predvolený názov","offer_id":43486060904537,"sku":"EPC-A10-PS260-PD204L150T-KIT","price":695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/epc-a10-web-guiding-system-kit-powered.jpg?v=1782826288"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/collections\/988e9e0b-30a6-4439-b3a2-1ceacd3feaa7.png?v=1779804820","url":"https:\/\/fmfpack.com\/sk-sk\/collections\/riadenie-napnutia-pasu.oembed","provider":"FMF Supply","version":"1.0","type":"link"}