{"product_id":"epc-a12-ccd-edge-line-web-guide-system-pd403l150t-400kg-actuator","title":"EPC-A12 CCD Edge\/Line Web Guide System with PD403L150T 400kg Actuator","description":"\u003ch2\u003eEPC-A12 CCD edge\/line web guide system with PD403L150T actuator\u003c\/h2\u003e\n\u003cp\u003eThis listing is for an EPC-A12 controller kit supplied with an HCCD\/CCD camera sensor and a PD403L150T servo actuator. In this configuration, the set is intended for visible edge, contrast edge, printed line, printed mark and pattern tracking on roll-to-roll web materials.\u003c\/p\u003e\n\u003cp\u003eThe EPC-A12 controller platform can work with different sensor categories when the correct sensor is matched to the guiding task. This page is for the CCD camera sensor configuration. Ultrasonic, photoelectric and other sensor setups are separate configurations unless specifically confirmed.\u003c\/p\u003e\n\u003ch3\u003eWhat this CCD set is for\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEdge\/line position control where the CCD sensor can see a clear edge, line, printed mark or contrast target\u003c\/li\u003e\n  \u003cli\u003ePrinted web guiding for packaging, label, film and converting lines\u003c\/li\u003e\n  \u003cli\u003eEPC edge guiding and LPC line guiding tasks that need camera-based target recognition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSensor fit\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eIncluded sensor type\u003c\/td\u003e\n\u003ctd\u003eHCCD\/CCD digital camera sensor for line position and edge\/mark tracking\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBest-fit targets\u003c\/td\u003e\n\u003ctd\u003eVisible edge, contrast edge, printed line, printed mark, pattern target\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBefore ordering\u003c\/td\u003e\n\u003ctd\u003eIf the target is transparent, low contrast, irregular, or difficult to see, share material photos, line speed and guiding target so the sensor match can be checked.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eController platform capability vs. this kit\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEPC edge guiding\u003c\/td\u003e\n\u003ctd\u003eAvailable when the CCD sensor can identify the web edge or contrast edge\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLPC line guiding\u003c\/td\u003e\n\u003ctd\u003eAvailable when the CCD sensor can identify a visible line, printed mark or pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCPC center guiding\u003c\/td\u003e\n\u003ctd\u003eRequires a matching center or dual-edge sensor arrangement\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSPC serpentine correction\u003c\/td\u003e\n\u003ctd\u003eDepends on the machine layout and matched sensor\/control configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMain features of the included set\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEPC-A12 edge\/line position controller with color screen and manual\/auto controls\u003c\/li\u003e\n  \u003cli\u003eHCCD\/CCD camera sensor for visible edge, line, printed mark and pattern tracking\u003c\/li\u003e\n  \u003cli\u003ePD403L150T precision linear actuator with 150 mm travel, 400 kg thrust and 30 mm\/s speed\u003c\/li\u003e\n  \u003cli\u003eLinear position encoder feedback on the included actuator\u003c\/li\u003e\n  \u003cli\u003eIncluded power supply accepts 100-240V AC input\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEPC-A12 edge\/line position controller\u003c\/td\u003e\n\u003ctd\u003e1 set\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHCCD\/CCD camera sensor\u003c\/td\u003e\n\u003ctd\u003e1 pc\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePD403L150T servo actuator\u003c\/td\u003e\n\u003ctd\u003e1 set\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e1 pc, AC100-240V input\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCables and bracket mount\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEPC-A12 controller specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eEPC-A12\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eController supply voltage\u003c\/td\u003e\n\u003ctd\u003eDC 24V-45V, standard 24V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMotor drive capacity\u003c\/td\u003e\n\u003ctd\u003e24V-45V, max 10A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEncoder power supply\u003c\/td\u003e\n\u003ctd\u003eDC 15V, max 200mA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAnalog inputs\u003c\/td\u003e\n\u003ctd\u003e3 channels, 0-5V, 20K ohm impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSensor power supply\u003c\/td\u003e\n\u003ctd\u003eDC 12V, max 350mA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCorrection response time\u003c\/td\u003e\n\u003ctd\u003e0.5 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAnalog input resolution\u003c\/td\u003e\n\u003ctd\u003e12-bit ADC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSwitch inputs\u003c\/td\u003e\n\u003ctd\u003e3-channel NPN\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSupported sensor categories\u003c\/td\u003e\n\u003ctd\u003eUltrasonic, photoelectric and CCD, matched according to the guiding task\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eController drive speed range\u003c\/td\u003e\n\u003ctd\u003e1-75 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProtection rating\u003c\/td\u003e\n\u003ctd\u003eIP53\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eIncluded CCD sensor and actuator\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCCD sensor use\u003c\/td\u003e\n\u003ctd\u003eVisible edge, contrast edge, line, printed mark and pattern tracking\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSensor setup\u003c\/td\u003e\n\u003ctd\u003eTarget setup is required so the sensor knows what edge, line or mark to track\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator model\u003c\/td\u003e\n\u003ctd\u003ePD403L150T\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator application\u003c\/td\u003e\n\u003ctd\u003eEPC\/LPC web guiding system\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator travel\u003c\/td\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator thrust\u003c\/td\u003e\n\u003ctd\u003e400 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator speed\u003c\/td\u003e\n\u003ctd\u003e30 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePosition feedback\u003c\/td\u003e\n\u003ctd\u003eLinear position encoder\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrdering notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThis standard set includes the HCCD\/CCD camera sensor and PD403L150T actuator.\u003c\/li\u003e\n  \u003cli\u003eIt does not include ultrasonic, photoelectric or dual-edge center-guiding hardware unless separately confirmed.\u003c\/li\u003e\n  \u003cli\u003eFor low-contrast targets, transparent targets, center guiding, serpentine correction setup or a different actuator stroke\/thrust, contact us before ordering.\u003c\/li\u003e\n  \u003cli\u003eThe plug and voltage are configured according to the customer's shipping country by default.\u003c\/li\u003e\n  \u003cli\u003eFor matching support, share the web material, web width, line speed, target type and installation space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is included in this EPC-A12 set?\u003c\/h4\u003e\n\u003cp\u003eOne set includes the EPC-A12 edge\/line controller, HCCD\/CCD camera sensor, PD403L150T servo actuator, AC100-240V power supply, cables and bracket mount.\u003c\/p\u003e\n\u003ch4\u003eWhat guiding task is this CCD set for?\u003c\/h4\u003e\n\u003cp\u003eIt is for camera-based edge and line guiding where the sensor can identify a visible edge, contrast edge, printed line, printed mark or pattern.\u003c\/p\u003e\n\u003ch4\u003eCan it track printed marks?\u003c\/h4\u003e\n\u003cp\u003eYes. The included CCD sensor is intended for visible printed mark, line and pattern tracking after the target is set up.\u003c\/p\u003e\n\u003ch4\u003eCan this standard set do center guiding?\u003c\/h4\u003e\n\u003cp\u003eThe EPC-A12 controller can be configured for more than one guiding mode, but this standard CCD set is sold for edge\/line target tracking. Center guiding needs the matching sensor arrangement.\u003c\/p\u003e\n\u003ch4\u003eWhat actuator is included?\u003c\/h4\u003e\n\u003cp\u003eThe included actuator is PD403L150T, with 150 mm travel, 400 kg thrust, 30 mm\/s speed and linear position encoder feedback.\u003c\/p\u003e\n\u003ch4\u003eWhat should I check before ordering?\u003c\/h4\u003e\n\u003cp\u003eCheck whether the CCD sensor can clearly see the edge, line, printed mark or pattern to be tracked. For transparent, low-contrast or irregular targets, contact us before ordering.\u003c\/p\u003e","brand":"FMF Supply","offers":[{"title":"Default Title","offer_id":43370966843481,"sku":"FMF-EPC-A12-17657","price":1071.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sa490e897cea5498fa814b23de42bac8d4.webp?v=1780391150","url":"https:\/\/fmfpack.com\/products\/epc-a12-ccd-edge-line-web-guide-system-pd403l150t-400kg-actuator","provider":"FMF Supply","version":"1.0","type":"link"}