{"title":"Verktøy for kabelbehandling og ledningsarbeid","description":"\u003cp\u003eVerktøy for ledningsbehandling og kabler til kabelklargjøring, krymping, avisolering, vikling og spolearbeid. Denne samlingen inkluderer RJ45-krympematriser, semi-automatiske kabelkrympemaskiner, hydrauliske kabelkrympeverktøy, maskiner for avisolering av emaljert ledning, spoleviklingsmaskiner, ledningsarrangører, kabelkuttere og krympematriser.\u003c\/p\u003e\u003cp\u003eSjekk hver produktside for ledningsstørrelse, kabeltype, matrisekompatibilitet, spenning, krympkraft, vikleområde og inkluderte tilbehør før du velger et verktøy.\u003c\/p\u003e","products":[{"product_id":"df-8-electric-enameled-wire-stripper-0-3-2-5mm","title":"DF-8 Electric Enameled Wire Stripping Machine 0.3-2.5mm, 110V\/220V","description":"\u003csection\u003e\n\u003ch2\u003eDF-8 Electric Enameled Wire Stripper\u003c\/h2\u003e\n\u003cp\u003eThe DF-8 is a handheld electric wire stripping machine for removing varnish and enamel insulation from small enameled copper wire. It is built for bench work where motor coil, transformer, or electronic-device wires need clean prepared ends.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eKey Fit\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWire type: enameled or varnished copper wire.\u003c\/li\u003e\n\u003cli\u003eApplicable wire diameter: 0.3-2.5 mm.\u003c\/li\u003e\n\u003cli\u003ePower options: 220V 50Hz or 110V 60Hz variants.\u003c\/li\u003e\n\u003cli\u003ePower: 50 W.\u003c\/li\u003e\n\u003cli\u003eWorking length: adjustable up to 50 mm.\u003c\/li\u003e\n\u003cli\u003eProduction capacity: 600 pieces\/h.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eBlade and Speed Control\u003c\/h2\u003e\n\u003cp\u003eThe DF-8 uses a rotating three-claw blade head to scrape enamel from the wire surface. Adjust blade rotation to match the wire diameter: use a lower setting for thinner enameled wire and a faster setting for thicker wire.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eWhen to Choose This Model\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eChoose DF-8 for handheld stripping of 0.3-2.5 mm enameled copper wire.\u003c\/li\u003e\n\u003cli\u003eSuitable for motor coil repair, transformer repair, and electronic-device manufacturing or maintenance work involving varnished winding wire.\u003c\/li\u003e\n\u003cli\u003eFor plastic-insulated cable, large scrap cable, or wire outside 0.3-2.5 mm, choose a different wire stripper matched to that cable type.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eVoltage and Plug Options\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\" border=\"1\" cellspacing=\"0\" cellpadding=\"8\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"text-align: left;\"\u003eOption\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eSKU\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e220V EU plug\u003c\/td\u003e\n\u003ctd\u003eFMF-DF-8-17305-220V-EU-PLUG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e220V AU plug\u003c\/td\u003e\n\u003ctd\u003eFMF-DF-8-17305-220V-AU-PLUG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e110V US plug\u003c\/td\u003e\n\u003ctd\u003eFMF-DF-8-17305-110V-US-PLUG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat wire diameter can the DF-8 strip?\u003c\/h3\u003e\n\u003cp\u003eThe DF-8 is for enameled copper wire from 0.3 mm to 2.5 mm.\u003c\/p\u003e\n\u003ch3\u003eIs this a handheld tool or a full automatic wire processing line?\u003c\/h3\u003e\n\u003cp\u003eIt is a handheld electric enameled wire stripping tool. It is not a full wire-processing line.\u003c\/p\u003e\n\u003ch3\u003eWhich voltage option should I choose?\u003c\/h3\u003e\n\u003cp\u003eSelect 220V EU plug, 220V AU plug, or 110V US plug according to the power supply and plug type needed at your workbench.\u003c\/p\u003e\n\u003ch3\u003eHow should the blade speed be adjusted?\u003c\/h3\u003e\n\u003cp\u003eUse a lower rotation setting for thinner enameled wire and a faster setting for thicker wire.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"220V EU plug","offer_id":43370938761305,"sku":"FMF-DF-8-17305-220V-EU-PLUG","price":44.08,"currency_code":"USD","in_stock":true},{"title":"220V AU plug","offer_id":43370938794073,"sku":"FMF-DF-8-17305-220V-AU-PLUG","price":44.08,"currency_code":"USD","in_stock":true},{"title":"110V US plug","offer_id":43370938826841,"sku":"FMF-DF-8-17305-110V-US-PLUG","price":44.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/IMG_20190219_155454.jpg?v=1780655583"},{"product_id":"hewlee-hl-400-battery-hydraulic-crimping-tool-16-400mm2","title":"HEWLEE HL-400 Batteridrevet hydraulisk krimpverktøy, 16–400 mm²","description":"\u003csection\u003e\n\u003ch2\u003eHEWLEE HL-400 Batteridrevet hydraulisk krimpverktøy\u003c\/h2\u003e\n\u003cp\u003eHEWLEE HL-400 er et batteridrevet hydraulisk krimpverktøy for kabling av kabelsko og ledningsterminaler. Produktets merkelapp identifiserer modellen som HL-400 med 18V DC-strøm, 120 kN utgangskraft, 42 mm slag og krimpområde for kobber- og aluminiumsledere.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSpesifikasjoner\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSynlig merke: HEWLEE\u003c\/li\u003e\n\u003cli\u003eModell på verktøyets merkelapp: HL-400\u003c\/li\u003e\n\u003cli\u003eVerktøytype: batteridrevet hydraulisk krimpverktøy \/ elektrisk ledningskrimper\u003c\/li\u003e\n\u003cli\u003eUtgangskraft: 120 kN\u003c\/li\u003e\n\u003cli\u003eSlag: 42 mm\u003c\/li\u003e\n\u003cli\u003eKrimpområde: Cu 16–400 mm²; Al 25–300 mm²\u003c\/li\u003e\n\u003cli\u003eSpenning på merkelapp: 18V DC\u003c\/li\u003e\n\u003cli\u003eKrimphode vist: C-hode med utskiftbare bakker\u003c\/li\u003e\n\u003cli\u003eSKU: FMF-IT-83385\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSettet på bildet viser\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHL-400 batteridrevet krimpverktøy\u003c\/li\u003e\n\u003cli\u003eHard bærekoffert med skuminnlegg\u003c\/li\u003e\n\u003cli\u003eSett med krimpbakker vist i kofferten\u003c\/li\u003e\n\u003cli\u003eTo batteripakker vist på koffertbildet\u003c\/li\u003e\n\u003cli\u003eBatterilader og strømkabel vist\u003c\/li\u003e\n\u003cli\u003eBruksanvisning merket Batteridrevet krimpverktøy HL-400\u003c\/li\u003e\n\u003cli\u003eSkulderstropp vist på settbildet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eTypisk bruk\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKrimp kabelsko og ledningsterminaler på kobber- eller aluminiumsledere innenfor det angitte området.\u003c\/li\u003e\n\u003cli\u003eBruk en batteridrevet hydraulisk krimper der håndkrimpekraft ikke er praktisk.\u003c\/li\u003e\n\u003cli\u003eStøtt ledningsbehandling, kabelinstallasjon og vedlikeholdsoppgaver som samsvarer med verktøyets rekkevidde og bakkesett.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFør bestilling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBekreft at ledermateriale, kabeltverrsnitt og kabelskotype samsvarer med verktøyets rekkevidde og bakkesett.\u003c\/li\u003e\n\u003cli\u003eBekreft nøyaktig bakkestørrelse, antall batterier, laderplugg og tilbehørsmengde før kjøp hvis dette er avgjørende for jobben.\u003c\/li\u003e\n\u003cli\u003eBekreft om prosjektet krever en spesifikk sertifisering, kalibreringsdokument eller elektrisk sikkerhetsstandard før bruk.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eOfte stilte spørsmål\u003c\/h2\u003e\n\u003ch3\u003eHvilken modell vises?\u003c\/h3\u003e\n\u003cp\u003eVerktøyets merkelapp og bruksanvisning identifiserer produktet som modell HL-400.\u003c\/p\u003e\n\u003ch3\u003eHvilket krimpområde er oppført på verktøyet?\u003c\/h3\u003e\n\u003cp\u003eDen synlige merkelappen viser Cu 16–400 mm² og Al 25–300 mm².\u003c\/p\u003e\n\u003ch3\u003eHvilket strømsystem bruker det?\u003c\/h3\u003e\n\u003cp\u003eMerkelappen viser 18V DC, og produktet inkluderer et batteridrevet krimpverktøy med batteripakker vist på settbildet.\u003c\/p\u003e\n\u003ch3\u003eEr dette for krimp av kabelsko?\u003c\/h3\u003e\n\u003cp\u003eJa. Dette produktet og verktøyformatet passer til krimp av kabelsko og ledningsterminaler innenfor det angitte lederområdet.\u003c\/p\u003e\n\u003ch3\u003eEr alle tilbehørsdetaljer garantert fra bildene?\u003c\/h3\u003e\n\u003cp\u003eSettbildet viser bakker, batterier, lader, strømkabel, manual, stropp og koffert. Bekreft nøyaktig tilbehørsmengde og pluggtype før kjøp hvis jobben din avhenger av dem.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Standardtittel","offer_id":43370941349977,"sku":"FMF-IT-83385","price":837.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/08cc8220-2f79-4f5e-b3a5-5af40318f106.png?v=1780737789"},{"product_id":"ews-12-12v-cordless-enameled-wire-stripping-machine","title":"EWS-12 12V Trådløs emaljert trådavisoleringmaskin 0.3-2.5mm","description":"\u003csection\u003e\u003ch2\u003eProduktdetaljer\u003c\/h2\u003e\n\u003cp\u003eEWS-12 er en 12V trådløs emaljert trådavisoleringmaskin for fjerning av lakk eller maling fra emaljert kobbertråd og magnettråd. Det er et håndholdt trådbearbeidingsverktøy for avisolering av små diameter tråder.\u003c\/p\u003e\n\u003cp\u003eAvisolingsområdet er 0.3-2.5 mm. Verktøyet bruker et roterende tre-klo bladhode, og bladrotasjonen kan justeres i henhold til tråddiameteren.\u003c\/p\u003e\u003c\/section\u003e\n\u003csection\u003e\u003ch2\u003eNøkkelfunksjoner\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEWS-12 håndholdt emaljert trådavisoleringmaskin.\u003c\/li\u003e\n\u003cli\u003eEgnet for 0.3-2.5 mm emaljert kobbertråd, lakkert kobbertråd og magnettråd.\u003c\/li\u003e\n\u003cli\u003e12V trådløs batteridrevet design for bærbar avisolering.\u003c\/li\u003e\n\u003cli\u003eRoterende tre-klo bladhode for fjerning av isolasjonsbelegg fra trådender.\u003c\/li\u003e\n\u003cli\u003eJusterbar bladrotasjon hjelper til med å tilpasse verktøyet til forskjellige tråddiametre innenfor støttet område.\u003c\/li\u003e\n\u003cli\u003eInkluderer én avisoleringmaskin, ett batteri og én 100-240V AC-lader.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\n\u003csection\u003e\u003ch2\u003eSpesifikasjoner\u003c\/h2\u003e\n\u003cp\u003eNøkkelspesifikasjoner kjøpere bør sjekke er modell EWS-12, 0.3-2.5 mm trådområde, 12V batteristrøm, roterende tre-klo bladhode, 100-240V AC-laderinngang, inkludert batteri og SKU FMF-IM-97497-CHINA-MAINLAND.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModell\u003c\/th\u003e\n\u003ctd\u003eEWS-12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProdukttype\u003c\/th\u003e\n\u003ctd\u003eTrådløs emaljert trådavisoleringmaskin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStøttet trådområde\u003c\/th\u003e\n\u003ctd\u003e0.3-2.5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTrådtype\u003c\/th\u003e\n\u003ctd\u003eEmaljert kobbertråd, lakkert kobbertråd, magnettråd\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrøm\u003c\/th\u003e\n\u003ctd\u003e12V batteridrevet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBladhode\u003c\/th\u003e\n\u003ctd\u003eRoterende tre-klo bladhode\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLaderinngang\u003c\/th\u003e\n\u003ctd\u003e100-240V AC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInkluderte elementer\u003c\/th\u003e\n\u003ctd\u003eAvisoleringmaskin, batteri, lader\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eFMF-IM-97497-CHINA-MAINLAND\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/section\u003e\n\u003csection\u003e\u003ch2\u003eUtvalgsnotater\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVelg dette verktøyet når tråddiameteren er innenfor 0.3-2.5 mm-området.\u003c\/li\u003e\n\u003cli\u003eTest avisolingsdybde og bladrotasjon på prøvetråd før produksjonsbruk.\u003c\/li\u003e\n\u003cli\u003eDette verktøyet er for avisolering av emaljerte eller lakkerte trådender, ikke for resirkulering av store kabelavfall.\u003c\/li\u003e\n\u003cli\u003eLaderplugg og spenning er som standard konfigurert i henhold til kundens forsendelsesland.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\n\u003csection\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHva brukes EWS-12 til?\u003c\/h3\u003e\n\u003cp\u003eDen brukes til å fjerne emalje, lakk eller malingbelegg fra små emaljerte kobbertråd- og magnettrådender.\u003c\/p\u003e\n\u003ch3\u003eHvilken trådstørrelse kan den avisolere?\u003c\/h3\u003e\n\u003cp\u003eDen støtter 0.3-2.5 mm tråd.\u003c\/p\u003e\n\u003ch3\u003eHvilke nøkkelspesifikasjoner bør jeg sjekke før bestilling?\u003c\/h3\u003e\n\u003cp\u003eSjekk modell EWS-12, 0.3-2.5 mm trådområde, 12V batteristrøm, roterende tre-klo bladhode, 100-240V AC-laderinngang, inkludert batteri og SKU FMF-IM-97497-CHINA-MAINLAND.\u003c\/p\u003e\n\u003ch3\u003eHva følger med verktøyet?\u003c\/h3\u003e\n\u003cp\u003ePakken inkluderer én avisoleringmaskin, ett batteri og én 100-240V AC-lader.\u003c\/p\u003e\n\u003ch3\u003eHvilken bestillings- og oppsettinformasjon er tydelig?\u003c\/h3\u003e\n\u003cp\u003eVerktøyet er batteridrevet, laderinngangen er 100-240V AC, inkludert SKU er FMF-IM-97497-CHINA-MAINLAND, og laderpluggen er som standard konfigurert i henhold til kundens forsendelsesland.\u003c\/p\u003e\n\u003ch3\u003eEr dette for resirkulering av store kabelavfall?\u003c\/h3\u003e\n\u003cp\u003eNei. Det er et håndholdt emaljert trådavisolingsverktøy for små trådender innenfor støttet 0.3-2.5 mm-område.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Fastlands-Kina","offer_id":43370942627929,"sku":"FMF-IM-97497-CHINA-MAINLAND","price":61.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sb302442b45c04b24aa32e9a8b7cd63f0Q.webp?v=1780390758"},{"product_id":"digital-control-transformer-coil-winding-machine-wire-winder","title":"Digital styrt transformator spoleviklingsmaskin 2-Direction trådvikler","description":"\n\u003csection\u003e\n  \u003ch2\u003eProduktdetaljer\u003c\/h2\u003e\n  \u003cp\u003eDenne digitalt styrte automatiske spoleviklingsmaskinen er en lavhastighets trådvikler for transformatorspolevikling. Den bruker en stepmotorkontroll og støtter toveis vikling.\u003c\/p\u003e\n  \u003cp\u003eMaskinen er bygget for spoleviklingsoppgaver der digital kontroll, lavhastighetsjustering og repeterbar vikling er nødvendig. Den oppførte SKU-en er FMF-IM-75993.\u003c\/p\u003e\n  \u003cp\u003eEgnet bruksområde er transformatorspole- og trådvikling som krever digital kontroll, lavhastighetsjustering og toveis vikling.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eNøkkelfunksjoner\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eAutomatisk transformatorspoleviklingsmaskin for trådvikling.\u003c\/li\u003e\n    \u003cli\u003eDigital kontroll med lav variabel hastighet.\u003c\/li\u003e\n    \u003cli\u003eSteptermotorbasert viklingsmaskindesign.\u003c\/li\u003e\n    \u003cli\u003eToveis trådviklingsfunksjon for spoleviklingsoppsett.\u003c\/li\u003e\n    \u003cli\u003eModulær elektrisk kontroll for å forbedre driftspålitelighet.\u003c\/li\u003e\n    \u003cli\u003eKompatibel med forskjellige klemformer for ulike spoleviklingsoppgaver når formoppsettet passer arbeidet.\u003c\/li\u003e\n    \u003cli\u003eUtgangsaksel oppført som M8 x 100mm.\u003c\/li\u003e\n    \u003cli\u003eInformasjon om fotbrytertilkobling og installasjons-\/koblingsvideo er referert i produktnotatene.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eSpesifikasjoner\u003c\/h2\u003e\n  \u003ctable\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003cth scope=\"row\"\u003eProdukttype\u003c\/th\u003e\n\u003ctd\u003eAutomatisk transformatorspoleviklingsmaskin \/ trådvikler\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth scope=\"row\"\u003eKontrolltype\u003c\/th\u003e\n\u003ctd\u003eDigital kontroll\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth scope=\"row\"\u003eMotortype angitt på siden\u003c\/th\u003e\n\u003ctd\u003eSteptermotor\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth scope=\"row\"\u003eViklingsretning\u003c\/th\u003e\n\u003ctd\u003eTo retninger\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth scope=\"row\"\u003eMerknad om inngangsspenning\u003c\/th\u003e\n\u003ctd\u003e220V AC-område angitt i produktinstruksjonene\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth scope=\"row\"\u003eUtgangsaksel\u003c\/th\u003e\n\u003ctd\u003eM8 x 100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eFMF-IM-75993\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eDriftsnotater\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eStill hastighetskontrollknappen tilbake til null før maskinen slås på.\u003c\/li\u003e\n    \u003cli\u003eEtter arbeid, slå av strømbryteren eller trekk ut støpselet.\u003c\/li\u003e\n    \u003cli\u003eHold viklingsmaskinen ren og unngå å plassere verktøy oppå maskinen.\u003c\/li\u003e\n    \u003cli\u003eBekreft klemform, tråd, spolestørrelse, spenning og viklingsretning før bestilling.\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003cp\u003eKjøpspanelet på denne produktsiden viser gjeldende pris og tilgjengelighet for SKU FMF-IM-75993.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eFAQ\u003c\/h2\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHva brukes denne spoleviklingsmaskinen til?\u003c\/summary\u003e\n    \u003cp\u003eDen brukes til transformatorspole- og trådvikling med digital kontroll og toveis vikling.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eBruker denne maskinen stepmotorkontroll?\u003c\/summary\u003e\n    \u003cp\u003eJa. Produktittelen og oppføringen identifiserer den som en stepmotorbasert transformatorspoleviklingsmaskin.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHvilken utgangsaksel er oppført?\u003c\/summary\u003e\n    \u003cp\u003eDen oppførte utgangsakselen er M8 x 100mm.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eHva bør jeg bekrefte før bestilling?\u003c\/summary\u003e\n    \u003cp\u003eBekreft klemform, tråd- og spolekrav, spenning, viklingsretning, SKU, pris og tilgjengelighet før bestilling.\u003c\/p\u003e\n  \u003c\/details\u003e\n  \u003cdetails\u003e\n    \u003csummary\u003eEr denne oppføringen for en frittstående stepmotordriver?\u003c\/summary\u003e\n    \u003cp\u003eNei. Denne oppføringen er for en spoleviklingsmaskin, ikke en frittstående NEMA stepmotordriver eller EtherCAT-driver.\u003c\/p\u003e\n  \u003c\/details\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Standardtittel","offer_id":43370946822233,"sku":"FMF-IM-75993","price":151.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sda6c4d45784b49c9b1cd327c8121f0bc5.webp?v=1780390820"},{"product_id":"hl-45-battery-powered-hydraulic-cable-cutter-45mm-handheld-wire-tool","title":"HL-45 Batteridrevet hydraulisk kabelkutter 45mm Håndholdt elektrisk verktøy for ledninger","description":"\n\u003csection\u003e\n  \u003ch2\u003eProduktdetaljer\u003c\/h2\u003e\n  \u003cp\u003eHL-45 er en batteridrevet hydraulisk kabelkutter for håndholdt kapping av ledninger og kabler. Den er utviklet for kjøpere som trenger et bærbart elektrohydraulisk kappeverktøy med en maksimal kappediameter på 45mm.\u003c\/p\u003e\n  \u003cp\u003eBruk denne kabelkutteren når modellen HL-45, kappediameter 45mm og batteridrevet håndholdt drift passer til ditt kabelkapparbeid.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eHovedegenskaper\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eModell: HL-45 batteridrevet hydraulisk kabelkutter.\u003c\/li\u003e\n    \u003cli\u003eVerktøytype: håndholdt elektrohydraulisk kabelkappeverktøy.\u003c\/li\u003e\n    \u003cli\u003eMaksimal kappediameter: 45mm.\u003c\/li\u003e\n    \u003cli\u003eDesignet for kapping av ledninger og kabler.\u003c\/li\u003e\n    \u003cli\u003eSKU-referanse: FMF-HL-45-98585.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eSpesifikasjoner\u003c\/h2\u003e\n  \u003ctable\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003cth scope=\"row\"\u003eProdukttype\u003c\/th\u003e\n\u003ctd\u003eBatteridrevet hydraulisk kabelkutter\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth scope=\"row\"\u003eModell\u003c\/th\u003e\n\u003ctd\u003eHL-45\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth scope=\"row\"\u003eDriftsmåte\u003c\/th\u003e\n\u003ctd\u003eHåndholdt elektrohydraulisk kappeverktøy\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaksimal kappediameter\u003c\/th\u003e\n\u003ctd\u003e45mm\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth scope=\"row\"\u003eBruksområde\u003c\/th\u003e\n\u003ctd\u003eKapping av ledninger og kabler\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eFMF-HL-45-98585\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eUtvalgsnotater\u003c\/h2\u003e\n  \u003cp\u003eFør bestilling må du kontrollere at modellen HL-45 og maksimal kappediameter 45mm samsvarer med kabelstørrelsen og kappearbeidet. Denne annonsen gjelder en kabelkutter, ikke et krympesett, kabelsko-krymper eller kabelrekkverkspresseverktøy.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eSpørsmål og svar\u003c\/h2\u003e\n  \u003ch3\u003eHva brukes HL-45 til?\u003c\/h3\u003e\n  \u003cp\u003eDen brukes til håndholdt kapping av ledninger og kabler med batteridrevet hydraulisk kappehandling.\u003c\/p\u003e\n  \u003ch3\u003eHva er maksimal kappediameter?\u003c\/h3\u003e\n  \u003cp\u003eMaksimal kappediameter er 45mm.\u003c\/p\u003e\n  \u003ch3\u003eEr dette en kabelkutter eller et krympeverktøy?\u003c\/h3\u003e\n  \u003cp\u003eDette produktet er en hydraulisk kabelkutter. Det er ikke en kabelsko-krymper eller et krympesett.\u003c\/p\u003e\n  \u003ch3\u003eHva bør jeg sjekke før bestilling?\u003c\/h3\u003e\n  \u003cp\u003eKontroller modellen HL-45, kappediameter 45mm, batteridrevet håndholdt drift, SKU FMF-HL-45-98585 og ditt kabelkappbehov.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Standardtittel","offer_id":43370947575897,"sku":"FMF-HL-45-98585","price":713.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S634ec126301e409a99991b83511ede99x.webp?v=1780390831"},{"product_id":"automatic-wire-twisting-machine-high-speed-cable-stranding-machine-electronic-wire-harness-twister-copper-wire-twining-tool","title":"Automatic Wire Twisting Machine for Cable Stranding Wire Harness","description":"\u003csection\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis automatic wire twisting machine is used for cable stranding, electronic wire harness twisting, and copper wire twining work. It helps make processed wires more uniform, neat, and consistent while reducing manual twisting labor in repeated production tasks.\u003c\/p\u003e\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic wire twisting machine for cable and wire harness processing.\u003c\/li\u003e\n\u003cli\u003eLCD display screen for parameter setting and operation visibility.\u003c\/li\u003e\n\u003cli\u003ePower interface with protection design.\u003c\/li\u003e\n\u003cli\u003eFoot pedal interface for convenient operation.\u003c\/li\u003e\n\u003cli\u003eWire twisting clamp with good clamping force and easy manual opening for wire placement.\u003c\/li\u003e\n\u003cli\u003eAvailable WT model options for different head and clamp configurations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eAvailable Options\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eOption\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSKU\u003c\/th\u003e\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eWT-120W-Single Head\u003c\/td\u003e\n\u003ctd\u003e5746433032104\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWT-Double Head\u003c\/td\u003e\n\u003ctd\u003e5715488171239\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWT-5 Head\u003c\/td\u003e\n\u003ctd\u003e5715488171240\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWT-Auto Clamp\u003c\/td\u003e\n\u003ctd\u003e5715488171242\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eSelection Notes\u003c\/h2\u003e\n\u003cp\u003eChoose the WT option that matches the head or clamp configuration needed for your wire twisting workflow. Check the selected option, SKU, product images, and machine layout before ordering.\u003c\/p\u003e\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is this machine used for?\u003c\/h3\u003e\n\u003cp\u003eIt is used for automatic wire twisting, cable stranding, electronic wire harness twisting, and copper wire twining work.\u003c\/p\u003e\n\u003ch3\u003eDoes it have an LCD screen?\u003c\/h3\u003e\n\u003cp\u003eYes. The machine includes an LCD display screen for parameter setting and operation visibility.\u003c\/p\u003e\n\u003ch3\u003eDoes it support foot pedal operation?\u003c\/h3\u003e\n\u003cp\u003eYes. The machine includes a foot pedal interface for convenient operation.\u003c\/p\u003e\n\u003ch3\u003eWhat WT options are available?\u003c\/h3\u003e\n\u003cp\u003eThe available options are WT-120W-Single Head, WT-Double Head, WT-5 Head, and WT-Auto Clamp.\u003c\/p\u003e\n\u003ch3\u003eWhat should I confirm before ordering?\u003c\/h3\u003e\n\u003cp\u003eConfirm the selected WT option, SKU, machine layout, and the wire processing requirements for your cable or wire harness workflow before ordering.\u003c\/p\u003e\u003c\/section\u003e","brand":"FMF","offers":[{"title":"WT-120W-Single Head","offer_id":43370953867353,"sku":"5746433032104","price":259.65,"currency_code":"USD","in_stock":true},{"title":"WT-Double Head","offer_id":43370953900121,"sku":"5715488171239","price":392.86,"currency_code":"USD","in_stock":true},{"title":"WT-5 Head","offer_id":43370953932889,"sku":"5715488171240","price":470.82,"currency_code":"USD","in_stock":true},{"title":"WT-Auto Clamp","offer_id":43370953965657,"sku":"5715488171242","price":335.69,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S8e4c2d0ae670462a97a63ee103789fddx.webp?v=1780390898"},{"product_id":"automatic-meter-counting-cable-winding-machine-with-wire-arranging-for-data-cable-power-cord-headphone-wire-reeling-rewinding","title":"Automatic Meter Counting Cable Winding Machine 10mm Wire Arranging","description":"\u003csection\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis automatic meter counting cable winding machine is designed for wire winding, meter counting, and orderly cable arranging. It is used for reeling and rewinding AC power cables, DC power cables, USB data cables, video cables, HDMI cables, headphone wires, and similar wire materials.\u003c\/p\u003e\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMeter counting wire winding machine with automatic wire arranging.\u003c\/li\u003e\n\u003cli\u003eSuitable for multi-layer winding and neat cable arrangement.\u003c\/li\u003e\n\u003cli\u003eAdjustable winding speed for different wire materials.\u003c\/li\u003e\n\u003cli\u003eFoot pedal control for convenient operation.\u003c\/li\u003e\n\u003cli\u003eAutomatic traverse \/ wire arranging function for orderly winding.\u003c\/li\u003e\n\u003cli\u003eCompact structure for cable processing and small production workshops.\u003c\/li\u003e\n\u003cli\u003eListed winding speed: 2000 RPM.\u003c\/li\u003e\n\u003cli\u003eListed power supply: 220V.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eAutomatic meter counting cable winding machine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWire arranging\u003c\/th\u003e\n\u003ctd\u003eAutomatic traverse \/ wire arranging function\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWinding speed\u003c\/th\u003e\n\u003ctd\u003e2000 RPM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower supply\u003c\/th\u003e\n\u003ctd\u003e220V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMeter counting length\u003c\/th\u003e\n\u003ctd\u003eUp to 50 m for wire diameter under 8 mm; up to 100 m for wire diameter under 5 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWinding turns\u003c\/th\u003e\n\u003ctd\u003e1-99999 turns\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuitable wires\u003c\/th\u003e\n\u003ctd\u003eAC power cable, DC power cable, USB data cable, video cable, HDMI cable, headphone wire, and similar wire materials\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eAvailable Options\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eOption\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSKU\u003c\/th\u003e\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMCWM-10MM\u003c\/td\u003e\n\u003ctd\u003e4983118360763\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMCWWM-AS-10MM\u003c\/td\u003e\n\u003ctd\u003e4983118360764\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eSelection Notes\u003c\/h2\u003e\n\u003cp\u003eSelect the MCWM-10MM or MCWWM-AS-10MM option according to the machine configuration you need. Confirm the cable diameter, target winding length, wire material, and workshop power supply before ordering.\u003c\/p\u003e\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is this cable winding machine used for?\u003c\/h3\u003e\n\u003cp\u003eIt is used for meter counting, cable winding, wire arranging, reeling, and rewinding of suitable cable and wire materials.\u003c\/p\u003e\n\u003ch3\u003eWhat cable types are listed as suitable?\u003c\/h3\u003e\n\u003cp\u003eThe listed materials include AC power cables, DC power cables, USB data cables, video cables, HDMI cables, headphone wires, and similar wire materials.\u003c\/p\u003e\n\u003ch3\u003eWhat meter counting length is listed?\u003c\/h3\u003e\n\u003cp\u003eThe listed meter counting length is up to 50 m for wire diameter under 8 mm and up to 100 m for wire diameter under 5 mm.\u003c\/p\u003e\n\u003ch3\u003eWhat options are available?\u003c\/h3\u003e\n\u003cp\u003eThe available options are MCWM-10MM and MCWWM-AS-10MM.\u003c\/p\u003e\n\u003ch3\u003eDoes it have automatic wire arranging?\u003c\/h3\u003e\n\u003cp\u003eYes. The machine includes an automatic traverse \/ wire arranging function for neat winding.\u003c\/p\u003e\u003c\/section\u003e","brand":"FMF","offers":[{"title":"MCWM-10MM","offer_id":43370954096729,"sku":"4983118360763","price":773.49,"currency_code":"USD","in_stock":true},{"title":"MCWWM-AS-10MM","offer_id":43370954129497,"sku":"4983118360764","price":1255.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sef0b0d22004a4e43a5d598e2864e1b8cg.webp?v=1780390901"},{"product_id":"wire-crimping-machine-mould-terminal-connector-crimping-die-cable-press-tool-replacement-parts","title":"Wire Crimping Machine Mould Terminal Connector Die 4P4C-10P10C","description":"\u003csection\u003e\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThis listing is for wire crimping machine mould replacement parts used as terminal connector crimping dies. It is not presented as a complete crimping machine; choose the die option that matches the connector format needed for your cable press tool workflow.\u003c\/p\u003e\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWire crimping machine mould \/ crimping die replacement part.\u003c\/li\u003e\n\u003cli\u003eUsed for terminal connector crimping die selection.\u003c\/li\u003e\n\u003cli\u003eAvailable connector-format options: 4P4C, 6P6C, 8P8C, and 10P10C.\u003c\/li\u003e\n\u003cli\u003eSuitable for buyers replacing or selecting a mould for a compatible wire crimping setup.\u003c\/li\u003e\n\u003cli\u003eCompact replacement-part listing with each option priced the same.\u003c\/li\u003e\n\u003c\/ul\u003e\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eAvailable Options\u003c\/h2\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003eOption\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSKU\u003c\/th\u003e\n\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e4P4C\u003c\/td\u003e\n\u003ctd\u003eFMF-IM-37529-4P4C\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e6P6C\u003c\/td\u003e\n\u003ctd\u003eFMF-IM-37529-6P6C\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e8P8C\u003c\/td\u003e\n\u003ctd\u003eFMF-IM-37529-8P8C\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10P10C\u003c\/td\u003e\n\u003ctd\u003eFMF-IM-37529-10P10C\u003c\/td\u003e\n\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eSelection Notes\u003c\/h2\u003e\n\u003cp\u003eConfirm the connector format, mould size, and compatibility with your existing wire crimping machine or cable press tool before ordering. Do not select by general crimper force, AWG range, or terminal family unless your machine documentation confirms the match.\u003c\/p\u003e\u003c\/section\u003e\u003csection\u003e\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs this listing for a complete wire crimping machine?\u003c\/h3\u003e\n\u003cp\u003eNo. This listing is for wire crimping machine mould \/ terminal connector crimping die replacement parts.\u003c\/p\u003e\n\u003ch3\u003eWhat connector-format options are available?\u003c\/h3\u003e\n\u003cp\u003eThe available options are 4P4C, 6P6C, 8P8C, and 10P10C.\u003c\/p\u003e\n\u003ch3\u003eHow should I choose the correct mould?\u003c\/h3\u003e\n\u003cp\u003eChoose the option that matches your connector format and confirm compatibility with your existing crimping machine or cable press tool.\u003c\/p\u003e\n\u003ch3\u003eAre AWG range or crimping force specified?\u003c\/h3\u003e\n\u003cp\u003eNo. The current product data does not specify AWG range, crimping force, or hydraulic tool compatibility.\u003c\/p\u003e\n\u003ch3\u003eWhat are the SKUs?\u003c\/h3\u003e\n\u003cp\u003eThe SKUs are FMF-IM-37529-4P4C, FMF-IM-37529-6P6C, FMF-IM-37529-8P8C, and FMF-IM-37529-10P10C.\u003c\/p\u003e\u003c\/section\u003e","brand":"FMF","offers":[{"title":"4P4C","offer_id":43370954457177,"sku":"FMF-IM-37529-4P4C","price":57.72,"currency_code":"USD","in_stock":true},{"title":"6P6C","offer_id":43370954489945,"sku":"FMF-IM-37529-6P6C","price":57.72,"currency_code":"USD","in_stock":true},{"title":"10P10C","offer_id":43370954522713,"sku":"FMF-IM-37529-10P10C","price":57.72,"currency_code":"USD","in_stock":true},{"title":"8P8C","offer_id":43370954555481,"sku":"FMF-IM-37529-8P8C","price":57.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S6b2e639f02bb489095cbc80f4db2bfb30.webp?v=1780390905"},{"product_id":"electric-semi-automatic-rj45-cable-crimping-machine-2p-8p-wire-crimper-for-rj11-rj12-network-cable-110v-220v","title":"HF-90W Elektrisk halvautomatisk RJ45 kabelkrympemaskin 2P-8P med 8P8C form for RJ11 RJ12","description":"\u003csection\u003e\n\u003ch2\u003eProduktdetaljer\u003c\/h2\u003e\n\u003cp\u003eHF-90W er en 90W elektrisk halvautomatisk RJ45 kabelkrympemaskin for 2P-8P-kontaktkrymping. Dette produktet er beregnet for krymping av RJ45-, RJ11- og RJ12-kabler, og maskinen leveres som standard med en 8P8C-form.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eNøkkelfunksjoner\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModell: HF-90W.\u003c\/li\u003e\n\u003cli\u003eStrøm: 90W.\u003c\/li\u003e\n\u003cli\u003eEgnet område for denne maskinen: 2P-8P.\u003c\/li\u003e\n\u003cli\u003eKontakt- og kabelbruk angitt for dette produktet: Krymping av RJ45-, RJ11- og RJ12-kontakter, telefonlinje og nettverks-PC-kontakter.\u003c\/li\u003e\n\u003cli\u003eStandardform: 8P8C-form hvis ikke annet er spesifisert.\u003c\/li\u003e\n\u003cli\u003eValgfrie former for dette produktet inkluderer 4P4C, 4P2C, 6P6C, 6P4C, 6P2C, 8P8C og 8P2C.\u003c\/li\u003e\n\u003cli\u003eSKU-referanse: FMF-RJ45-18873.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eValgnotater\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVelg denne maskinen når du trenger et halvautomatisk krympeoppsett for RJ45\/RJ11\/RJ12-type modulære kontakter.\u003c\/li\u003e\n\u003cli\u003eBekreft kontaktens pinneantall, nødvendig form, spenningskrav og kabelarbeidsflyt før bestilling.\u003c\/li\u003e\n\u003cli\u003eHvis du trenger en annen form enn standard 8P8C-form, bekreft formbehovet før kjøp.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eOfte stilte spørsmål\u003c\/h2\u003e\n\u003ch3\u003eHva brukes HF-90W til?\u003c\/h3\u003e\n\u003cp\u003eDen brukes til halvautomatisk krymping av RJ45-, RJ11- og RJ12-type modulære kontakter i 2P-8P-arbeidsflyter.\u003c\/p\u003e\n\u003ch3\u003eHvilken form følger med som standard?\u003c\/h3\u003e\n\u003cp\u003eDette produktet oppgir at maskinen leveres med en 8P8C-form som standard hvis ikke annet er spesifisert.\u003c\/p\u003e\n\u003ch3\u003eHvilken strøm er maskinen designet for?\u003c\/h3\u003e\n\u003cp\u003eDen oppgitte strømmen er 90W.\u003c\/p\u003e\n\u003ch3\u003eHvilken SKU skal refereres til for denne krympemaskinen?\u003c\/h3\u003e\n\u003cp\u003eBruk SKU FMF-RJ45-18873 for denne elektriske halvautomatiske RJ45 kabelkrympemaskinen.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Standardtittel","offer_id":43370956292185,"sku":"FMF-RJ45-18873","price":355.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S147d37eb395e48ee8dc6a550264156ebL.webp?v=1780390930"},{"product_id":"high-precision-induction-pneumatic-wire-stripping-machine-0-03-2mm-automatic-cable-peeling-tool-for-pvc-pc-single-core-1-20mm-w","title":"Automatic Wire Stripping Machine Pneumatic\/Electric 0.03-4.0mm2","description":"\u003csection class=\"product-description\"\u003e\n  \u003ch2\u003eAutomatic Induction Wire Stripping Machine\u003c\/h2\u003e\n  \u003cp\u003eThis automatic induction wire stripping machine is offered in pneumatic and electric versions for small wire and cable peeling work. It is built for PVC wire, stranded wire, solid-core wire, single-core cable, rubber wire, computer cable, electronic wire, PTFE wire, silicone wire, fiberglass wire and sleeved wire applications within the listed size ranges.\u003c\/p\u003e\n  \u003cp\u003eChoose the pneumatic version when the work needs automatic sensing control without an external power supply. Choose the electric version when the work needs a powered inductive wire stripping machine with 110V\/220V voltage options.\u003c\/p\u003e\n  \u003cp\u003eBefore ordering, check the version, SKU, wire cross-sectional area, maximum wire diameter, stripping length, air supply for the pneumatic version and voltage for the electric version.\u003c\/p\u003e\n\n  \u003ch3\u003eKey Features\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eAutomatic sensing control for wire stripping and cable peeling work.\u003c\/li\u003e\n    \u003cli\u003e0.01 mm setting precision for stripping diameter adjustment.\u003c\/li\u003e\n    \u003cli\u003eUp to 20 mm stripping length, depending on version and setup.\u003c\/li\u003e\n    \u003cli\u003ePneumatic version processes 0.03-2.08 mm2 \/ 32-14 AWG conductors.\u003c\/li\u003e\n    \u003cli\u003eElectric version processes 0.03-4.0 mm2 wire cross-sectional area.\u003c\/li\u003e\n    \u003cli\u003eSuitable for PVC, PTFE, silicone, rubber, electronic, computer and single-core wires within the stated range.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003ePneumatic Version Specifications\u003c\/h3\u003e\n  \u003ctable\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003cth\u003eVariant SKU\u003c\/th\u003e\n\u003ctd\u003eFMF-IM-27833-PNEUMATIC\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eControl mode\u003c\/th\u003e\n\u003ctd\u003eAutomatic sensing\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003ePower requirement\u003c\/th\u003e\n\u003ctd\u003ePure pneumatic control, no external power supply required\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eSetting precision\u003c\/th\u003e\n\u003ctd\u003e0.01 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eStroke\u003c\/th\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eStrip length\u003c\/th\u003e\n\u003ctd\u003e1-20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eApplicable conductor section\u003c\/th\u003e\n\u003ctd\u003e0.03-2.08 mm2 \/ 32-14 AWG\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eMaximum outer diameter\u003c\/th\u003e\n\u003ctd\u003e3.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eBlade\u003c\/th\u003e\n\u003ctd\u003e90 degree V-type blade\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eAir supply\u003c\/th\u003e\n\u003ctd\u003e0.5-0.8 MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eProcessing speed\u003c\/th\u003e\n\u003ctd\u003e0.3 s\/piece\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eProduct size\u003c\/th\u003e\n\u003ctd\u003e265 x 70 x 135 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003ch3\u003eElectric Version Specifications\u003c\/h3\u003e\n  \u003ctable\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003cth\u003eVariant SKU\u003c\/th\u003e\n\u003ctd\u003eFMF-IM-27833-ELECTRIC\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eProduct name\u003c\/th\u003e\n\u003ctd\u003eInductive type fully automatic electric wire stripping machine\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eMaximum wire diameter\u003c\/th\u003e\n\u003ctd\u003e4.2 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eMaximum stripping length\u003c\/th\u003e\n\u003ctd\u003e20 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eDiameter setting precision\u003c\/th\u003e\n\u003ctd\u003e0.01 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eProcessing time\u003c\/th\u003e\n\u003ctd\u003e0.5 s\/piece\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003ctd\u003e220V\/50Hz or 110V\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eWire cross-sectional area\u003c\/th\u003e\n\u003ctd\u003e0.03-4.0 mm2\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003e380 x 85 x 188 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eNet weight\u003c\/th\u003e\n\u003ctd\u003e4.5 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003ch3\u003eSelection Notes\u003c\/h3\u003e\n  \u003cp\u003eMatch the wire material, outer diameter, conductor cross-section, stripping length and available air or power supply before selecting the pneumatic or electric version.\u003c\/p\u003e\n\n  \u003ch3\u003eFAQ\u003c\/h3\u003e\n  \u003ch4\u003eWhat is this wire stripping machine used for?\u003c\/h4\u003e\n  \u003cp\u003eIt is used for small wire and cable peeling work, including PVC wire, stranded wire, solid-core wire, single-core cable, rubber wire, electronic wire, PTFE wire and silicone wire within the listed size ranges.\u003c\/p\u003e\n\n  \u003ch4\u003eWhat is the difference between the pneumatic and electric versions?\u003c\/h4\u003e\n  \u003cp\u003eThe pneumatic version uses automatic sensing and pure pneumatic control without an external power supply. The electric version is a powered inductive wire stripping machine with 110V\/220V voltage options.\u003c\/p\u003e\n\n  \u003ch4\u003eWhat key specifications should buyers check before ordering?\u003c\/h4\u003e\n  \u003cp\u003eBuyers should check the selected version, SKU, wire cross-sectional area, maximum wire diameter, stripping length, air supply for the pneumatic version and voltage for the electric version.\u003c\/p\u003e\n\n  \u003ch4\u003eWhich SKUs are listed for this product?\u003c\/h4\u003e\n  \u003cp\u003eThe pneumatic version SKU is FMF-IM-27833-PNEUMATIC. The electric version SKU is FMF-IM-27833-ELECTRIC.\u003c\/p\u003e\n\n  \u003ch4\u003eWhat wire size can the pneumatic version process?\u003c\/h4\u003e\n  \u003cp\u003eThe pneumatic version processes 0.03-2.08 mm2 \/ 32-14 AWG conductors with up to 3.2 mm outer diameter.\u003c\/p\u003e\n\n  \u003ch4\u003eWhat wire size can the electric version process?\u003c\/h4\u003e\n  \u003cp\u003eThe electric version processes 0.03-4.0 mm2 wire cross-sectional area and supports up to 4.2 mm maximum wire diameter.\u003c\/p\u003e\n\n  \u003ch4\u003eWhat stripping length is supported?\u003c\/h4\u003e\n  \u003cp\u003eThe listed stripping length reaches up to 20 mm. The pneumatic version lists a 1-20 mm strip length range.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Pneumatic","offer_id":43370965860441,"sku":"FMF-IM-27833-PNEUMATIC","price":680.07,"currency_code":"USD","in_stock":true},{"title":"Electric","offer_id":43370965893209,"sku":"FMF-IM-27833-ELECTRIC","price":1719.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S3c2213cda57c4112ae09facbdb4c1c4a1.webp?v=1780391134"},{"product_id":"4p4c-6p6c-8p8c-10p10c-crimping-mold-set-for-semi-automatic-rj45-cable-crimping-machine-2p-8p-wire-crimping-machine","title":"RJ45 Cable Crimping Mold Set 4P4C 6P6C 8P8C 10P10C","description":"\u003cdiv class=\"product-description\"\u003e\n  \u003ch2\u003eRJ45 Cable Crimping Mold Set 4P4C 6P6C 8P8C 10P10C\u003c\/h2\u003e\n  \u003cp\u003eThis RJ45 cable crimping mold set is for compatible semi-automatic cable crimping machines and 2P-8P wire crimping workflows. Choose the required mold type before ordering. Each variant includes 1 set of the selected crimping mold model.\u003c\/p\u003e\n\n  \u003ch3\u003eAvailable Mold Types\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e4P4C mold set - SKU FMF-RJ45-89977-4P4C\u003c\/li\u003e\n    \u003cli\u003e6P6C mold set - SKU FMF-RJ45-89977-6P6C\u003c\/li\u003e\n    \u003cli\u003e8P8C mold set - SKU FMF-RJ45-89977-8P8C\u003c\/li\u003e\n    \u003cli\u003e10P10C mold set - SKU FMF-RJ45-89977-10P10C\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003ePackage Information\u003c\/h3\u003e\n  \u003ctable style=\"border-collapse: collapse; border: 1px solid #ddd;\" border=\"1\"\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n        \u003ctd\u003e\u003cstrong\u003eProduct Type\u003c\/strong\u003e\u003c\/td\u003e\n        \u003ctd\u003eCable crimping mold set\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003e\u003cstrong\u003eMachine Reference\u003c\/strong\u003e\u003c\/td\u003e\n        \u003ctd\u003eCompatible semi-automatic RJ45 cable crimping machine\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003e\u003cstrong\u003eSelectable Models\u003c\/strong\u003e\u003c\/td\u003e\n        \u003ctd\u003e4P4C \/ 6P6C \/ 8P8C \/ 10P10C\u003c\/td\u003e\n      \u003c\/tr\u003e\n      \u003ctr\u003e\n        \u003ctd\u003e\u003cstrong\u003ePackage\u003c\/strong\u003e\u003c\/td\u003e\n        \u003ctd\u003e1 set of the selected crimping mold model\u003c\/td\u003e\n      \u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\n  \u003ch3\u003eSelection Notes\u003c\/h3\u003e\n  \u003cp\u003eConfirm the connector type, mold type, and compatible crimping machine before ordering. This product includes the selected mold set only; the full crimping machine, cable tester, wire stripper, connectors, and tool kit accessories are not included.\u003c\/p\u003e\n\n  \u003ch3\u003eFAQ\u003c\/h3\u003e\n  \u003ch4\u003eWhich mold types can I choose?\u003c\/h4\u003e\n  \u003cp\u003eYou can choose 4P4C, 6P6C, 8P8C, or 10P10C.\u003c\/p\u003e\n  \u003ch4\u003eHow many mold sets are included?\u003c\/h4\u003e\n  \u003cp\u003eEach order includes 1 set of the selected crimping mold model.\u003c\/p\u003e\n  \u003ch4\u003eIs this a complete RJ45 crimping tool kit?\u003c\/h4\u003e\n  \u003cp\u003eNo. This listing is for the selected crimping mold set only, not a complete tool kit or crimping machine.\u003c\/p\u003e\n  \u003ch4\u003eWhat should I confirm before ordering?\u003c\/h4\u003e\n  \u003cp\u003eConfirm your connector type, required mold type, and machine compatibility before ordering.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"FMF","offers":[{"title":"4P4C","offer_id":43370966253657,"sku":"FMF-RJ45-89977-4P4C","price":66.31,"currency_code":"USD","in_stock":true},{"title":"6P6C","offer_id":43370966286425,"sku":"FMF-RJ45-89977-6P6C","price":66.31,"currency_code":"USD","in_stock":true},{"title":"8P8C","offer_id":43370966319193,"sku":"FMF-RJ45-89977-8P8C","price":66.31,"currency_code":"USD","in_stock":true},{"title":"10P10C","offer_id":43370966351961,"sku":"FMF-RJ45-89977-10P10C","price":66.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/rj45-cable-crimping-mold-set-all-options-white.webp?v=1780454133"},{"product_id":"bz-300-battery-hydraulic-crimping-tool-16-300mm-with-lcd-display-electric-cable-lug-crimper-for-cu-al-terminals","title":"BZ-300 Battery Hydraulic Crimping Tool 16-300mm2 LCD for Cu\/Al Cable Lugs","description":"\u003ch2\u003eBZ-300 Battery Hydraulic Crimping Tool for Cu\/Al Cable Lugs\u003c\/h2\u003e\n\u003cp\u003eThe BZ-300 is a battery powered hydraulic crimping tool for copper and aluminum cable terminals in the 16-300mm2 die range. It is built for electrical cable lug crimping where a cordless hydraulic crimper, LCD display, and included die set are needed for repeatable field or workshop work.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e16-300mm2 crimping die range for Cu\/Al cable terminals.\u003c\/li\u003e\n  \u003cli\u003e60kN crimping force with 17mm stroke.\u003c\/li\u003e\n  \u003cli\u003eLCD display for clearer tool status viewing during operation.\u003c\/li\u003e\n  \u003cli\u003e18V 3.0Ah battery system with two batteries included.\u003c\/li\u003e\n  \u003cli\u003eApprox. 320 crimps per charge when crimping Cu 150mm2 terminals.\u003c\/li\u003e\n  \u003cli\u003eTypical crimping cycle is 3-6 seconds, depending on cable size.\u003c\/li\u003e\n  \u003cli\u003eSupplied in a plastic carrying box for storage and transport.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eBZ-300\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTool type\u003c\/td\u003e\n\u003ctd\u003eBattery hydraulic crimping tool\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCrimping range\u003c\/td\u003e\n\u003ctd\u003e16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300mm2 dies\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSuitable terminals\u003c\/td\u003e\n\u003ctd\u003eCopper and aluminum cable terminals\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCrimping force\u003c\/td\u003e\n\u003ctd\u003e60kN\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStroke\u003c\/td\u003e\n\u003ctd\u003e17mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCrimping cycle\u003c\/td\u003e\n\u003ctd\u003e3-6 seconds, depending on cable size\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCrimps per charge\u003c\/td\u003e\n\u003ctd\u003eApprox. 320 crimps for Cu 150mm2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBattery voltage\u003c\/td\u003e\n\u003ctd\u003e18V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBattery capacity\u003c\/td\u003e\n\u003ctd\u003e3.0Ah\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCharging time\u003c\/td\u003e\n\u003ctd\u003eApprox. 2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePackage\u003c\/td\u003e\n\u003ctd\u003ePlastic box\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003ePackage Contents\u003c\/h3\u003e\n\u003cp\u003ePackage contents include the BZ-300 crimping tool, 11 die sizes from 16 to 300mm2, 2 batteries, 1 charger, cylinder sealing ring set, safety valve sealing ring set, and plastic carrying box.\u003c\/p\u003e\n\u003cp\u003eAccessories included are the crimping dies, 2 batteries, 1 charger, cylinder sealing ring set, safety valve sealing ring set, and plastic carrying box.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBZ-300 battery hydraulic crimping tool\u003c\/li\u003e\n  \u003cli\u003eCrimping dies: 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, and 300mm2\u003c\/li\u003e\n  \u003cli\u003e2 batteries\u003c\/li\u003e\n  \u003cli\u003e1 charger\u003c\/li\u003e\n  \u003cli\u003e1 cylinder sealing ring set\u003c\/li\u003e\n  \u003cli\u003e1 safety valve sealing ring set\u003c\/li\u003e\n  \u003cli\u003ePlastic carrying box\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSelection Notes\u003c\/h3\u003e\n\u003cp\u003eChoose this model when the required terminal sizes are within the supplied 16-300mm2 die set and a cordless hydraulic cable lug crimper is preferred over a manual hydraulic tool. Match the die size to the cable terminal before crimping.\u003c\/p\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat terminal materials can the BZ-300 crimp?\u003c\/h4\u003e\n\u003cp\u003eThe product information lists use with copper and aluminum cable terminals.\u003c\/p\u003e\n\u003ch4\u003eWhat die sizes are included?\u003c\/h4\u003e\n\u003cp\u003eThe included dies are 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, and 300mm2.\u003c\/p\u003e\n\u003ch4\u003eHow many crimps can it make per charge?\u003c\/h4\u003e\n\u003cp\u003eThe listed value is approximately 320 crimps per charge when crimping Cu 150mm2 terminals.\u003c\/p\u003e\n\u003ch4\u003eWhat is included with the tool?\u003c\/h4\u003e\n\u003cp\u003eThe package includes the crimping tool, die set, 2 batteries, 1 charger, cylinder sealing ring set, safety valve sealing ring set, and plastic carrying box.\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Default Title","offer_id":43370971660377,"sku":"FMF-BZ-300-01241","price":1005.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sba09772664f141c69422cf6b281eae6cp.webp?v=1780391237"},{"product_id":"fy730-fy740-automatic-coil-winder-machine-transformer-winding-machine-for-0-03-1-8mm-wire-220v","title":"FY730 FY740 Automatic Coil Winder Machine 220V 0.03-1.8mm Wire Transformer Winding","description":"\u003ch2\u003eFY730 FY740 Automatic Coil Winder Machine for Transformer Winding\u003c\/h2\u003e\n\u003cp\u003eThe FY730 and FY740 are automatic coil winder machines for transformer winding, electronic coils, micro-motor winding, and similar sequential coil winding work. The machine supports 220V power, programmable winding groups, preset coil counts, stepless speed adjustment, reverse counting, real-time display, and automatic stop.\u003c\/p\u003e\n\u003cp\u003eUse this product when the winding job needs programmable coil counts from 0 to 99999 turns per group and 1 to 10 winding groups on the same frame. The listed applicable wire diameter range is 0.03-1.80mm.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eAutomatic coil winding machine for transformer and electronic coil work.\u003c\/li\u003e\n  \u003cli\u003eProgrammable 1-10 winding groups for sequential winding operations.\u003c\/li\u003e\n  \u003cli\u003e0-99999 turns programmable coil count per group.\u003c\/li\u003e\n  \u003cli\u003eApplicable wire diameter range: 0.03-1.80mm.\u003c\/li\u003e\n  \u003cli\u003eMaximum wire frame width: 120mm.\u003c\/li\u003e\n  \u003cli\u003eMaximum wire frame diameter: 100mm.\u003c\/li\u003e\n  \u003cli\u003eMaximum speed: 2000 RPM on A-axis and 3000 RPM on B-axis.\u003c\/li\u003e\n  \u003cli\u003ePower-off memory listed as more than 12 hours.\u003c\/li\u003e\n  \u003cli\u003eReal-time display, automatic stop, stepless speed adjustment, and reverse counting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eModel family\u003c\/td\u003e\n\u003ctd\u003eFY730 \/ FY740\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMachine type\u003c\/td\u003e\n\u003ctd\u003eAutomatic coil winder machine\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e220V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMotor power options\u003c\/td\u003e\n\u003ctd\u003e300W \/ 500W\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eApplicable wire diameter\u003c\/td\u003e\n\u003ctd\u003e0.03-1.80mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaximum wire frame width\u003c\/td\u003e\n\u003ctd\u003e120mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaximum wire frame diameter\u003c\/td\u003e\n\u003ctd\u003e100mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaximum speed\u003c\/td\u003e\n\u003ctd\u003e2000 RPM A-axis \/ 3000 RPM B-axis\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProgrammable coil count\u003c\/td\u003e\n\u003ctd\u003e0-99999 turns per group\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProgrammable groups\u003c\/td\u003e\n\u003ctd\u003e1-10 groups\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower-off memory\u003c\/td\u003e\n\u003ctd\u003eMore than 12 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eModel Options\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOption\u003c\/td\u003e\n\u003ctd\u003eMotor power\u003c\/td\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFD730 \/ FY730\u003c\/td\u003e\n\u003ctd\u003e300W\u003c\/td\u003e\n\u003ctd\u003e220V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFD740 \/ FY740\u003c\/td\u003e\n\u003ctd\u003e500W\u003c\/td\u003e\n\u003ctd\u003e220V\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eTransformer coil winding.\u003c\/li\u003e\n  \u003cli\u003eTelecommunication equipment coil winding.\u003c\/li\u003e\n  \u003cli\u003eElectrical appliance and electronics winding work.\u003c\/li\u003e\n  \u003cli\u003eInstrumentation, circuit breaker, timer, and micro-motor winding applications.\u003c\/li\u003e\n  \u003cli\u003eGeneral coil winding jobs within the listed wire and frame range.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSelection Notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eChoose the 300W option for lighter winding work within the listed range.\u003c\/li\u003e\n  \u003cli\u003eChoose the 500W option when the listed winding job needs the higher motor power option.\u003c\/li\u003e\n  \u003cli\u003eConfirm that your wire diameter, coil frame width, and coil frame diameter are within the listed limits before ordering.\u003c\/li\u003e\n  \u003cli\u003eConfirm that 220V power is suitable for your workshop setup.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat wire diameter can the FY730\/FY740 wind?\u003c\/h4\u003e\n\u003cp\u003eThe listed applicable wire diameter range is 0.03-1.80mm.\u003c\/p\u003e\n\u003ch4\u003eHow many turns can be programmed?\u003c\/h4\u003e\n\u003cp\u003eThe listed programmable coil count is 0-99999 turns per group.\u003c\/p\u003e\n\u003ch4\u003eHow many winding groups are supported?\u003c\/h4\u003e\n\u003cp\u003eThe machine supports 1-10 programmable winding groups.\u003c\/p\u003e\n\u003ch4\u003eWhat is the difference between the two options?\u003c\/h4\u003e\n\u003cp\u003eThe listed options are 300W and 500W motor power versions, both for 220V power.\u003c\/p\u003e","brand":"FMF","offers":[{"title":"FD730 300W","offer_id":43370971889753,"sku":"FMF-FY730-97849-FD730-300W","price":312.75,"currency_code":"USD","in_stock":true},{"title":"FD740 500W","offer_id":43370971922521,"sku":"FMF-FY730-97849-FD740-500W","price":346.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S87deb7f575b54b9cbf5d828190dab2efQ.webp?v=1780391242"},{"product_id":"hl-300-cordless-hydraulic-crimping-tool-18v-16-300mm2","title":"HL-300 18V Cordless Cable Lug Crimper, Copper 300mm2 Aluminum 240mm2","description":"\u003csection\u003e\n  \u003ch2\u003eHL-300 Cordless Hydraulic Cable Lug Crimper\u003c\/h2\u003e\n  \u003cp\u003eThe HL-300 is an 18V cordless hydraulic crimping tool kit for battery cable lug terminals, electrical terminal cable crimping, and copper or aluminum cable lug installation work. It supports copper cable lugs up to 300 mm2 and aluminum cable lugs up to 240 mm2 with matching hex dies and a 60 kN hydraulic output in a rechargeable handheld tool body.\u003c\/p\u003e\n  \u003cp\u003eThis battery powered hydraulic crimper is built for field wiring, electrical maintenance, panel work, battery cable assembly, and cable lug crimping tasks where a portable hydraulic crimping tool kit is more practical than a bench-mounted crimper.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eKey Features\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003e18V rechargeable lithium battery operation for cordless cable lug and terminal crimping work.\u003c\/li\u003e\n    \u003cli\u003eCrimping range covers copper cable lugs up to 300 mm2 and aluminum cable lugs up to 240 mm2.\u003c\/li\u003e\n    \u003cli\u003e60 kN hydraulic crimping force for heavy cable lug crimping within the rated size range.\u003c\/li\u003e\n    \u003cli\u003e360-degree rotating head hydraulic crimper design for working from different angles inside panels, cabinets, and field wiring locations.\u003c\/li\u003e\n    \u003cli\u003eHex dies crimping tool setup with standard die sizes from 10 mm2 to 300 mm2.\u003c\/li\u003e\n    \u003cli\u003eLED work light, automatic retract, and high-pressure safety valve for controlled crimping cycles.\u003c\/li\u003e\n    \u003cli\u003eSupplied as a hydraulic crimping tool kit with dies, two rechargeable batteries, charger, carrying case, and accessories.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eSpecifications\u003c\/h2\u003e\n  \u003cp\u003eKey specifications for this cordless hydraulic cable lug crimper are the 18V rechargeable battery platform, copper 300 mm2 \/ aluminum 240 mm2 crimping range, 60 kN hydraulic force, 360-degree rotating head, LED work light, and hex die set.\u003c\/p\u003e\n  \u003ctable\u003e\n    \u003ctbody\u003e\n      \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eHL-300\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eTool type\u003c\/th\u003e\n\u003ctd\u003eCordless rechargeable hydraulic cable lug crimper\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eBattery platform\u003c\/th\u003e\n\u003ctd\u003e18V high-performance lithium battery\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eCrimping range\u003c\/th\u003e\n\u003ctd\u003eCopper cable lugs up to 300 mm2; aluminum cable lugs up to 240 mm2\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eNominal crimping force\u003c\/th\u003e\n\u003ctd\u003e60 kN\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eHydraulic oil capacity\u003c\/th\u003e\n\u003ctd\u003e180 ml\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eHead rotation\u003c\/th\u003e\n\u003ctd\u003e360-degree rotating head\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eLighting\u003c\/th\u003e\n\u003ctd\u003eLED work light\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eReturn mode\u003c\/th\u003e\n\u003ctd\u003eAutomatic retract\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eSafety system\u003c\/th\u003e\n\u003ctd\u003eHigh-pressure safety valve\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eStandard die sizes\u003c\/th\u003e\n\u003ctd\u003e10, 16, 25, 35, 50, 70, 95, 120, 150, 185, 240, 300 mm2\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eFMF-HL-300-28921\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003c\/tbody\u003e\n  \u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eApplication Fit\u003c\/h2\u003e\n  \u003cul\u003e\n    \u003cli\u003eBattery cable lug terminal crimping for matched lugs and cable sizes.\u003c\/li\u003e\n    \u003cli\u003eElectrical terminal cable crimping during equipment wiring and repair work.\u003c\/li\u003e\n    \u003cli\u003eCopper aluminum cable lugs when the lug, cable, and die size match the HL-300 range.\u003c\/li\u003e\n    \u003cli\u003eLarge cable lug crimping where the required copper or aluminum terminal is within the rated range.\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003ePackage Contents\u003c\/h2\u003e\n  \u003cp\u003eThe HL-300 tool kit includes the crimper body, hex crimping dies, two rechargeable lithium batteries, charger, carrying case, and accessory set under SKU FMF-HL-300-28921.\u003c\/p\u003e\n  \u003cul\u003e\n    \u003cli\u003eHL-300 cordless hydraulic crimping tool\u003c\/li\u003e\n    \u003cli\u003eHex crimping dies for the listed size range\u003c\/li\u003e\n    \u003cli\u003e2 rechargeable lithium batteries\u003c\/li\u003e\n    \u003cli\u003eBattery charger\u003c\/li\u003e\n    \u003cli\u003eCarrying case and accessory set\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eSelection Notes\u003c\/h2\u003e\n  \u003cp\u003eMatch the die size to the cable lug, terminal, and conductor cross-section before crimping. Use copper terminals up to 300 mm2 and aluminum terminals up to 240 mm2 within the rated tool range.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n  \u003ch2\u003eFAQ\u003c\/h2\u003e\n  \u003ch3\u003eWhat is the HL-300 used for?\u003c\/h3\u003e\n  \u003cp\u003eIt is used as a cordless hydraulic cable lug crimper for battery cable lug terminals, electrical terminals, copper cable lugs up to 300 mm2, and aluminum cable lugs up to 240 mm2.\u003c\/p\u003e\n  \u003ch3\u003eIs this a battery powered hydraulic crimper?\u003c\/h3\u003e\n  \u003cp\u003eYes. The HL-300 uses an 18V rechargeable lithium battery platform.\u003c\/p\u003e\n  \u003ch3\u003eDoes it come with dies?\u003c\/h3\u003e\n  \u003cp\u003eYes. The tool kit includes hex crimping dies for the listed HL-300 size range.\u003c\/p\u003e\n  \u003ch3\u003eDoes the crimping head rotate?\u003c\/h3\u003e\n  \u003cp\u003eYes. The HL-300 uses a 360-degree rotating head for access from different working angles.\u003c\/p\u003e\n  \u003ch3\u003eHow many batteries are included?\u003c\/h3\u003e\n  \u003cp\u003eThe standard kit includes 2 rechargeable lithium batteries and a charger.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Default Title","offer_id":43370972086361,"sku":"FMF-HL-300-28921","price":900.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/ig_0039a996ee1f790f016a4dbfbf1b1c8191bfd3a0df31253700.png?v=1783481503"},{"product_id":"gp15c-automatic-wire-arranger-rolling-ring-traverse-unit","title":"GP15C Automatic Wire Arranger | Rolling Ring Traverse Unit 0-11mm Pitch","description":"\u003ch2\u003eGP15C Automatic Wire Arranger \/ Rolling Ring Traverse Unit\u003c\/h2\u003e\n\u003cp\u003eThe GP15C is an automatic wire-arranging traverse unit for winding machine setups. It helps guide wire across a receiving spool and is selected by inside width, with options from 250 mm to 450 mm.\u003c\/p\u003e\n\u003ch3\u003eKey Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eGP15C\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eAutomatic wire arranger \/ rolling ring drive traverse unit\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePitch range\u003c\/th\u003e\n\u003ctd\u003e0-11 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eMaximum force\u003c\/th\u003e\n\u003ctd\u003e15 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eInside width options\u003c\/th\u003e\n\u003ctd\u003e250 mm, 300 mm, 350 mm, 400 mm, 450 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eHow To Choose The Inside Width\u003c\/h3\u003e\n\u003cp\u003eChoose an inside width that is at least the receiving spool width plus 150 mm for host-machine width and steering clearance. Example: for a 200 mm receiving spool, 200 mm + 150 mm = 350 mm, so choose 350 mm or larger.\u003c\/p\u003e\n\u003ch3\u003eWhen This Model Fits\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFor winding setups that need a GP15C wire arrangement machine or rolling ring traverse unit.\u003c\/li\u003e\n  \u003cli\u003eFor buyers comparing inside-width options instead of color choices.\u003c\/li\u003e\n  \u003cli\u003eFor layouts where the confirmed 0-11 mm pitch range and 15 kg maximum force match the machine requirement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBefore Ordering\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eConfirm the receiving spool width before choosing the inside-width option.\u003c\/li\u003e\n  \u003cli\u003eCheck the available machine space against the selected inside width.\u003c\/li\u003e\n  \u003cli\u003eIf you are replacing an existing traverse unit, compare the model and machine layout before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is the GP15C used for?\u003c\/h4\u003e\n\u003cp\u003eIt is used as an automatic wire arranger \/ traverse unit in winding machine setups.\u003c\/p\u003e\n\u003ch4\u003eWhich inside widths are available?\u003c\/h4\u003e\n\u003cp\u003eThe listed options are 250 mm, 300 mm, 350 mm, 400 mm and 450 mm.\u003c\/p\u003e\n\u003ch4\u003eHow should I choose the inside width?\u003c\/h4\u003e\n\u003cp\u003eUse the receiving spool width plus 150 mm as the selection check. A 200 mm spool needs 350 mm or larger inside width.\u003c\/p\u003e\n\u003ch4\u003eWhat pitch and force are listed for this model?\u003c\/h4\u003e\n\u003cp\u003eThe listed pitch range is 0-11 mm, and the listed maximum force is 15 kg.\u003c\/p\u003e\n\u003ch4\u003eWhat should I confirm before ordering?\u003c\/h4\u003e\n\u003cp\u003eConfirm the receiving spool width, the available installation space and whether the GP15C layout matches your winding setup.\u003c\/p\u003e\n\u003ch3\u003eProduct Images\u003c\/h3\u003e\n\u003cp\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"GP15C automatic wire arranger rolling ring traverse unit\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S8deac73ffbc648838a064e9485bfd06ag.jpg?width=800\u0026amp;height=800\u0026amp;hash=1600\" slate-data-type=\"image\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"GP15C wire arrangement machine detail view\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sf5f3ae9092f44daaa422957b474294693.jpg?width=790\u0026amp;height=504\u0026amp;hash=1294\" slate-data-type=\"image\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"GP15C rolling ring drive traverse unit product image\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S8dc18ea8a7b54faa9b18a5bdff369252N.jpg\" slate-data-type=\"image\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"GP15C winding wire arrangement machine side detail\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sd913b1ce6b1c4992ae85bdc9d23e1614E.jpg\" slate-data-type=\"image\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"GP15C automatic wire arranger close-up detail\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S651c6abb8dd744ca9aba308a674d0e35L.jpg\" slate-data-type=\"image\"\u003e\u003c\/p\u003e","brand":"FMF","offers":[{"title":"450 mm","offer_id":43370973429849,"sku":"FMF-GP15C-15353-INSIDE-WIDTH-450MM","price":77.66,"currency_code":"USD","in_stock":true},{"title":"250 mm","offer_id":43370973462617,"sku":"FMF-GP15C-15353-INSIDE-WIDTH250MM","price":69.27,"currency_code":"USD","in_stock":true},{"title":"300 mm","offer_id":43370973495385,"sku":"FMF-GP15C-15353-INSIDE-WIDTH-300MM","price":71.37,"currency_code":"USD","in_stock":true},{"title":"350 mm","offer_id":43370973528153,"sku":"FMF-GP15C-15353-INSIDE-WIDTH-350MM","price":73.47,"currency_code":"USD","in_stock":true},{"title":"400 mm","offer_id":43370973560921,"sku":"FMF-GP15C-15353-INSIDE-WIDTH-400MM","price":75.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S8dc18ea8a7b54faa9b18a5bdff369252N.webp?v=1780391272"}],"url":"https:\/\/fmfpack.com\/nb-no\/collections\/traadbehandling-kabelverktoy.oembed","provider":"FMF Supply","version":"1.0","type":"link"}