{"title":"Web-spenning og styringskontroll","description":"\u003cp\u003eSystemer for webspenning og styring for rull-til-rull emballasje-, trykke-, konverterings- og laminasjonslinjer. Utforsk spenningskontrollere, webstyrere, sensorer, aktuatorer, magnetbremser, koblinger og servokontrollkomponenter for stabil webhåndtering og nøyaktig justering.\u003c\/p\u003e","products":[{"product_id":"ccd-sensor-for-epc-a12-web-guiding-system-epc-lpc-system-edge-line-position-controller","title":"CCD-sensor for EPC-A12 banestyringssystem – kant-\/linjefølging","description":"\u003csection\u003e\n\u003ch2\u003eCCD-sensor for EPC-A12 banestyring\u003c\/h2\u003e\n\u003cp\u003eDenne CCD\/HCCD-sensoren brukes sammen med et EPC-A12 banestyringssystem for posisjonssporing av kant og linje. Den er beregnet for bruksområder der sensoren må identifisere kanten på et bevegelig bane, en kontrastkant, en linje eller et trykt mønster før styringssystemet korrigerer materialposisjonen.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eProduktdetaljer\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProdukttype: sensor for banestyring og kant-\/linjeposisjonskontrollsystemer.\u003c\/li\u003e\n\u003cli\u003eSystemreferanse: EPC-A12 banestyringssystem, til bruk med EPC\/LPC kant- og linjekontroll.\u003c\/li\u003e\n\u003cli\u003eSensorbeskrivelse: HCCD fargelineærkamera \/ CCD-sensor.\u003c\/li\u003e\n\u003cli\u003eSporingsmål: materialkanter, kontrastkanter, linjer og mønstre når målet er kalibrert.\u003c\/li\u003e\n\u003cli\u003eSKU-referanse: FMF-EPC-A12-76601.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eBruks- og utvalgsnotater\u003c\/h2\u003e\n\u003cp\u003eUlike banematerialer og trykte mål kan kreve forskjellig sensoroppsett. Før bestilling, sammenlign produktbildene og SKU med sensoren som brukes på ditt EPC-A12- eller EPC\/LPC-banestyringssystem, og bekreft at målet du ønsker å følge kan kalibreres på sensoren.\u003c\/p\u003e\n\u003cp\u003eDette produktet gjelder sensoren vist på denne produktsiden. Kontroller, aktuator, spenning, kabel og fullstendige systemkrav bør sjekkes mot din eksisterende maskin eller prosjektdokumentasjon før kjøp.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eOfte stilte spørsmål\u003c\/h2\u003e\n\u003ch3\u003eHva sporer denne CCD-sensoren?\u003c\/h3\u003e\n\u003cp\u003eProduktnotatene beskriver sporing av materialkanter, kontrastkanter, linjer og mønstre etter at målet er kalibrert.\u003c\/p\u003e\n\u003ch3\u003eEr dette for EPC- og LPC-banestyringssystemer?\u003c\/h3\u003e\n\u003cp\u003eJa. Produktittelen og notatene knytter denne sensoren til EPC-A12 banestyring og EPC\/LPC kant- eller linjeposisjonskontroll.\u003c\/p\u003e\n\u003ch3\u003eHva bør jeg bekrefte før bestilling?\u003c\/h3\u003e\n\u003cp\u003eBekreft EPC-A12-systemreferansen, sensorens utseende i produktbildene, SKU, og om materialkanten, linjen eller mønsteret ditt er egnet for kalibrering.\u003c\/p\u003e\n\u003ch3\u003eAngir denne siden detaljer om kontroller, aktuator, spenning eller sertifisering?\u003c\/h3\u003e\n\u003cp\u003eNei. Disse detaljene gjelder ikke for denne sensoroppføringen, så de bør bekreftes fra systemdokumentasjonen før kjøp.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Standardtittel","offer_id":43370941808729,"sku":"FMF-EPC-A12-76601","price":576.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sf8382637a9aa4858b54a6ad302f57f495.webp?v=1780390742"},{"product_id":"pg350a-servo-web-guiding-system-epc-lpc-edge-line-position-controller-with-ultrasonic-sensor-all-in-one-automatic-web-guide","title":"PG350A Alt-i-ett servo-banestyringssystem med ultralydsensor","description":"\u003csection\u003e\n\u003ch2\u003ePG350A Alt-i-ett servo-banestyringssystem\u003c\/h2\u003e\n\u003cp\u003ePG350A er et integrert servo-banestyringssystem for EPC\/LPC-kant- og linjeposisjonskontroll på smale banematerialer. Kontroller, driver og detektor er samlet i én kompakt banestyringsenhet for enklere installasjon og justering.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eHovedfunksjoner\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatisk banestyring for korrigering av kant- og linjeposisjon.\u003c\/li\u003e\n\u003cli\u003eIntegrert kontroller, driver og detektor for raskere installasjon og feilsøking.\u003c\/li\u003e\n\u003cli\u003eUltralydsensorkonfigurasjon for baneposisjonsdeteksjon.\u003c\/li\u003e\n\u003cli\u003eBørsteløs DC-servomotor, oppgitt som vedlikeholdsfri.\u003c\/li\u003e\n\u003cli\u003ePresisjonskuleskrue-mekanisme for nøyaktig posisjonering.\u003c\/li\u003e\n\u003cli\u003eStor styringsbevegelse for rull-til-rull-materialhåndtering.\u003c\/li\u003e\n\u003cli\u003eValselengde og -bredde kan tilpasses etter applikasjonskrav.\u003c\/li\u003e\n\u003cli\u003eValgfritt skjærestasjonsfeste: manuelt eller pneumatisk.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSpesifikasjoner\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModell\u003c\/th\u003e\n\u003ctd\u003ePG350A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSystemtype\u003c\/th\u003e\n\u003ctd\u003eAlt-i-ett servo-banestyringssystem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStyremodus\u003c\/th\u003e\n\u003ctd\u003eEPC\/LPC kant- og linjeposisjonskontroll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStrøm\u003c\/th\u003e\n\u003ctd\u003eAC220V \/ 110V, 80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eValsediameter\u003c\/th\u003e\n\u003ctd\u003e60 mm \/ tilpasset\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eValselengde\u003c\/th\u003e\n\u003ctd\u003e350 mm \/ tilpasset\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eValsebredde\u003c\/th\u003e\n\u003ctd\u003e260 mm \/ tilpasset\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaksimal hastighet\u003c\/th\u003e\n\u003ctd\u003e40 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOmgivelser\u003c\/th\u003e\n\u003ctd\u003e-10 til 60 °C, under RH 90 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eFMF-PG350A-74905\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eValgnotater\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBruk dette produktet når du trenger en PG350A alt-i-ett automatisk banestyring for smale baner.\u003c\/li\u003e\n\u003cli\u003eBekreft nødvendig valselengde, valsebredde, baneløp, spenning og monteringsplass før bestilling.\u003c\/li\u003e\n\u003cli\u003eHvis applikasjonen krever spesifikk banebredde, styringsvinkel, maksimal spenning, kabel sett eller festestil, bekreft disse detaljene før kjøp.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eOfte stilte spørsmål\u003c\/h2\u003e\n\u003ch3\u003eHva brukes PG350A til?\u003c\/h3\u003e\n\u003cp\u003eDen brukes til å styre smale banematerialer ved å korrigere kant- eller linjeposisjon under rull-til-rull-håndtering og konverteringsprosesser.\u003c\/p\u003e\n\u003ch3\u003eHva er integrert i systemet?\u003c\/h3\u003e\n\u003cp\u003eDette produktet er utformet med en integrert kontroller, driver og detektor, samt en børsteløs DC-servomotor og presisjonskuleskrue-mekanisme.\u003c\/p\u003e\n\u003ch3\u003eInkluderer dette produktet ultralydsensing?\u003c\/h3\u003e\n\u003cp\u003eJa. Produktittelen identifiserer dette PG350A banestyringssystemet med en ultralydsensor.\u003c\/p\u003e\n\u003ch3\u003eHva bør jeg bekrefte før bestilling?\u003c\/h3\u003e\n\u003cp\u003eBekreft spenning, valsedimensjoner, baneløp, monteringsplass og eventuelle krav til tilpasset valse eller skjærestasjonsfeste.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Standardtittel","offer_id":43370941907033,"sku":"FMF-PG350A-74905","price":1031.52,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S7463c6450336416aa1f0ab968c990b03e.webp?v=1780390744"},{"product_id":"pg450a-all-in-one-servo-web-guiding-system-epc-lpc-edge-line-position-controller-with-ultrasonic-sensor","title":"PG450A All-in-One Servo Web Guide with Ultrasonic Sensor","description":"\u003csection\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe PG450A is an all-in-one servo web guiding system for EPC\/LPC edge and line position control on narrow web materials. It integrates the controller, driver, detector, and servo guide structure in a compact unit, with an ultrasonic sensor configuration for web edge detection.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eKey Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: PG-450A \/ PG450A\u003c\/li\u003e\n\u003cli\u003eApplication: narrow web guiding for label printing, packaging, and non-woven material processes\u003c\/li\u003e\n\u003cli\u003eIntegrated controller, driver, detector, and guide structure for easier installation and debugging\u003c\/li\u003e\n\u003cli\u003eBrushless DC servo motor drive for low-maintenance operation\u003c\/li\u003e\n\u003cli\u003ePrecision ball screw mechanism for accurate positioning\u003c\/li\u003e\n\u003cli\u003eAvailable in two installation-direction options; select the direction that matches the sensor side and material feed direction shown in the product images\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePG-450A \/ PG450A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower input\u003c\/td\u003e\n\u003ctd\u003eAC220V \/ 80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive\u003c\/td\u003e\n\u003ctd\u003eBrushless DC servo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller length\u003c\/td\u003e\n\u003ctd\u003e450 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller diameter\u003c\/td\u003e\n\u003ctd\u003e60 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller width\u003c\/td\u003e\n\u003ctd\u003e310 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase length\u003c\/td\u003e\n\u003ctd\u003e460 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeb guide range\u003c\/td\u003e\n\u003ctd\u003e+\/-17 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. tension\u003c\/td\u003e\n\u003ctd\u003e500 N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. driving speed\u003c\/td\u003e\n\u003ctd\u003e40 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironment\u003c\/td\u003e\n\u003ctd\u003e-10 to 60 degree C, below RH 90%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eInstallation Direction Options\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eOption\u003c\/th\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOption 1\u003c\/td\u003e\n\u003ctd\u003eLeft-side sensor installation \/ right-to-left material feed as shown in the product image\u003c\/td\u003e\n\u003ctd\u003eFMF-PG450A-73209-OPTION-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOption 2\u003c\/td\u003e\n\u003ctd\u003eAlternate installation direction shown in the product images\u003c\/td\u003e\n\u003ctd\u003eFMF-PG450A-73209-OPTION-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSelection Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse PG450A when the 450 mm roller length, 310 mm roller width, and 500 N maximum tension match the web material and machine layout.\u003c\/li\u003e\n\u003cli\u003eConfirm whether your line needs EPC edge control, LPC line control, or both before ordering.\u003c\/li\u003e\n\u003cli\u003eConfirm installation side, material feed direction, voltage, web width, roller surface, and available mounting space before selecting Option 1 or Option 2.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is the difference between Option 1 and Option 2?\u003c\/h3\u003e\n\u003cp\u003eThey are installation-direction choices. Match the option to the sensor side and material feed direction shown in the product images before ordering.\u003c\/p\u003e\n\u003ch3\u003eWhat materials is this system intended for?\u003c\/h3\u003e\n\u003cp\u003eIt is intended for narrow web material guiding, including label printing, packaging, and non-woven material applications when the machine requirements match the listed specifications.\u003c\/p\u003e\n\u003ch3\u003eCan roller dimensions be customized?\u003c\/h3\u003e\n\u003cp\u003eThe PG series supports custom roller length, width, and surface treatment. Confirm the required dimensions and roller surface before ordering.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Option 1","offer_id":43370942005337,"sku":"FMF-PG450A-73209-OPTION-1","price":1075.73,"currency_code":"USD","in_stock":true},{"title":"Option 2","offer_id":43370942038105,"sku":"FMF-PG450A-73209-OPTION-2","price":1075.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sa940b38334bc4c8588b60bfa7537df81V.webp?v=1780390749"},{"product_id":"pg400a-servo-web-guiding-system-400mm-roller-epc-lpc-edge-position-controller-with-ultrasonic-sensor-for-web-control","title":"PG400A Servo Web Guiding System 400mm Roller with Ultrasonic Sensor","description":"\u003csection\u003e\n\u003ch2\u003ePG400A Servo Web Guiding System with 400mm Roller\u003c\/h2\u003e\n\u003cp\u003eThe PG400A is an all-in-one servo web guiding system for EPC\/LPC edge and line position control. It is listed with a 400mm roller and ultrasonic sensor for web control applications where narrow web materials need automatic guiding and correction.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eMain Functions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll-in-one web guide controller for accurate guiding of narrow web materials.\u003c\/li\u003e\n\u003cli\u003eIntegrated controller, driver, and detector to simplify installation and debugging.\u003c\/li\u003e\n\u003cli\u003eUltrasonic sensor configuration for web position detection.\u003c\/li\u003e\n\u003cli\u003eBrushless DC servo motor drive, listed as maintenance-free.\u003c\/li\u003e\n\u003cli\u003ePrecision ball screw mechanism for accurate positioning.\u003c\/li\u003e\n\u003cli\u003eLarge guiding travel for web control applications.\u003c\/li\u003e\n\u003cli\u003eRoller length and width can be custom-made based on application requirements.\u003c\/li\u003e\n\u003cli\u003eOptional cutting-station fixture: manual or pneumatic.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eInstallation Direction Options\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eOption\u003c\/th\u003e\n\u003cth scope=\"col\"\u003edirection note\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eSKU\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOption 1\u003c\/td\u003e\n\u003ctd\u003eLeft-side sensor installation; material feeding direction shown as right to left\u003c\/td\u003e\n\u003ctd\u003eFMF-PG400A-30809-OPTION-1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOption 2\u003c\/td\u003e\n\u003ctd\u003eMaterial feeding direction shown as left to right\u003c\/td\u003e\n\u003ctd\u003eFMF-PG400A-30809-OPTION-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eDetails\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003ePG400A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSystem type\u003c\/th\u003e\n\u003ctd\u003eAll-in-one servo web guiding system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl mode\u003c\/th\u003e\n\u003ctd\u003eEPC\/LPC edge and line position control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSensor wording\u003c\/th\u003e\n\u003ctd\u003eUltrasonic sensor for web control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRoller\u003c\/th\u003e\n\u003ctd\u003e400mm roller listed in product title\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVariant SKUs\u003c\/th\u003e\n\u003ctd\u003eFMF-PG400A-30809-OPTION-1 \/ FMF-PG400A-30809-OPTION-2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSelection Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSelect the installation direction that matches the sensor side and material feeding direction shown in your machine layout.\u003c\/li\u003e\n\u003cli\u003eConfirm the roller size, web path, mounting space, fixture style, and any custom roller requirements before ordering.\u003c\/li\u003e\n\u003cli\u003eIf your application requires a specific voltage, web width range, guide angle, maximum tension, cable set, or sensor accuracy, confirm those details before purchase because they are not in the current listing data.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is the PG400A used for?\u003c\/h3\u003e\n\u003cp\u003eIt is used for automatic web guiding, helping correct edge or line position in web control applications.\u003c\/p\u003e\n\u003ch3\u003eWhat is integrated in the PG400A system?\u003c\/h3\u003e\n\u003cp\u003eThis product is designed an integrated controller, driver, and detector with brushless DC servo motor driving and a precision ball screw mechanism.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between Option 1 and Option 2?\u003c\/h3\u003e\n\u003cp\u003eThe options relate to installation and material feeding direction. Option 1 is designed for left-side sensor installation with material feeding shown as right to left; Option 2 is listed with material feeding shown as left to right.\u003c\/p\u003e\n\u003ch3\u003eWhat should I confirm before ordering?\u003c\/h3\u003e\n\u003cp\u003eConfirm installation direction, roller size, web path, mounting space, and any required custom roller or fixture details.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Option 1","offer_id":43370945019993,"sku":"FMF-PG400A-30809-OPTION-1","price":1053.62,"currency_code":"USD","in_stock":true},{"title":"Option 2","offer_id":43370945052761,"sku":"FMF-PG400A-30809-OPTION-2","price":1053.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sd41ad234720f44d782dc3882fdd9ba05b.webp?v=1780390797"},{"product_id":"kt5w-2n1116-contrast-sensors-color-mark-sensor","title":"KT5W-2N1116 Kontrastsensor fargemerkesensor med kabel","description":"\u003csection\u003e\n\u003ch2\u003eKT5W-2N1116 Kontrastsensor\u003c\/h2\u003e\n\u003cp\u003eKT5W-2N1116 er en kontrast- og fargemerkesensor som brukes til å detektere trykte merker, registreringsmerker og kontrastendringer i industriell automasjon og emballasjemaskiner. Produktet inkluderer 1 stk KT5W-2N1116 sensor og 1 stk kabel.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eViktige detaljer\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModell: KT5W-2N1116.\u003c\/li\u003e\n\u003cli\u003eProdukttype: kontrastsensor \/ fargemerkesensor.\u003c\/li\u003e\n\u003cli\u003eSKU: FMF-KT5W-2N1116-87865.\u003c\/li\u003e\n\u003cli\u003eInnhold: 1 stk KT5W-2N1116 sensor + 1 stk kabel.\u003c\/li\u003e\n\u003cli\u003eBruk: merkedeteksjon, kontrastdeteksjon og registreringssensorapplikasjoner der maskinen må skille et merke fra bakgrunnen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eTekniske spesifikasjoner\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"text-align: left;\"\u003eElement\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eSpesifikasjon\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLyskilde\u003c\/td\u003e\n\u003ctd\u003eRGB LED.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBølgelengder\u003c\/td\u003e\n\u003ctd\u003e470 nm, 525 nm og 640 nm.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFøleavstand\u003c\/td\u003e\n\u003ctd\u003eOpptil 10 mm fra forkant av linsen.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLysflekkstørrelse\u003c\/td\u003e\n\u003ctd\u003e1.2 mm x 4.2 mm.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJustering\u003c\/td\u003e\n\u003ctd\u003eTeach-in-knapp; statisk 2-point teach-in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eForsyningsspenning\u003c\/td\u003e\n\u003ctd\u003e10 V DC til 30 V DC.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBryterutgang\u003c\/td\u003e\n\u003ctd\u003eNPN.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrytefrekvens \/ responstid\u003c\/td\u003e\n\u003ctd\u003e10 kHz \/ 50 µs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilkobling\u003c\/td\u003e\n\u003ctd\u003eM12, 5-pin plugg.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHus \/ beskyttelse\u003c\/td\u003e\n\u003ctd\u003eHus i sinkpressstøp, IP67 kapslingsklasse.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriftstemperatur\u003c\/td\u003e\n\u003ctd\u003e-10°C til +55°C.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVekt\u003c\/td\u003e\n\u003ctd\u003eCa. 400 g.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eUtvalgsnotater\u003c\/h2\u003e\n\u003cp\u003eBekreft nøyaktig KT5W-2N1116 modell, NPN-utgangskrav, M12 5-pin koblingsskjema, føleavstand og maskininngang før bestilling. Hvis kabellengde eller kontaktorientering er kritisk, sammenlign den medfølgende kabelen vist i produktbildene med maskinens koblingskrav.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eOfte stilte spørsmål\u003c\/h2\u003e\n\u003ch3\u003eHva brukes denne sensoren til?\u003c\/h3\u003e\n\u003cp\u003eDen brukes til kontrast- og fargemerkedeteksjon, for eksempel å detektere et trykt merke eller registreringsmerke mot en bakgrunn.\u003c\/p\u003e\n\u003ch3\u003eHvilken strømforsyning bruker den?\u003c\/h3\u003e\n\u003cp\u003eSensorspesifikasjonen angir et spenningsområde på 10 V DC til 30 V DC.\u003c\/p\u003e\n\u003ch3\u003eHvilken utgangstype har denne modellen?\u003c\/h3\u003e\n\u003cp\u003eDenne KT5W-2N1116-listen er for en modell med NPN-bryterutgang.\u003c\/p\u003e\n\u003ch3\u003eHva følger med?\u003c\/h3\u003e\n\u003cp\u003ePakken inneholder 1 stk KT5W-2N1116 kontrast- og fargemerkesensor og 1 stk kabel.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Standardtittel","offer_id":43370945970265,"sku":"FMF-KT5W-2N1116-87865","price":125.72,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S97d8f7bd87364402aaa4aed5f36e5e658.webp?v=1780390808"},{"product_id":"dc24v-magnetic-powder-clutch-hollow-shaft-6nm-12nm-25nm-for-tension-control-winding-printing-packaging-textile-machine","title":"DC24V Hollow Shaft Magnetic Powder Clutch 6Nm 12Nm 25Nm","description":"\u003csection\u003e\n\u003ch2\u003eDC24V Hollow Shaft Magnetic Powder Clutch\u003c\/h2\u003e\n\u003cp\u003eThis hollow shaft magnetic powder clutch is used for torque and tension control in winding, printing, packaging, and textile machinery. Package includes DC24V FL-K series options with 6Nm, 12Nm, and 25Nm torque ratings.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: hollow shaft magnetic powder clutch.\u003c\/li\u003e\n\u003cli\u003eVoltage: DC24V.\u003c\/li\u003e\n\u003cli\u003eAvailable torque options: 6Nm, 12Nm, and 25Nm.\u003c\/li\u003e\n\u003cli\u003eOption series shown on This product: FL-K-06, FL-K-12, and FL-K-25.\u003c\/li\u003e\n\u003cli\u003eCommon use: tension control for winding, printing, packaging, and textile machine applications.\u003c\/li\u003e\n\u003cli\u003eHollow shaft design supports compact integration into mechanical assemblies.\u003c\/li\u003e\n\u003cli\u003eUse a DC24V power source only. Using an AC power source can damage the clutch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eAvailable Options\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"text-align: left;\"\u003eOption\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eTorque\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eSKU\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFL-K-06\u003c\/td\u003e\n\u003ctd\u003e6Nm\u003c\/td\u003e\n\u003ctd\u003eFMF-DC24V-09305-FL-K-06-6NM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFL-K-12\u003c\/td\u003e\n\u003ctd\u003e12Nm\u003c\/td\u003e\n\u003ctd\u003eFMF-DC24V-09305-FL-K-12-12NM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFL-K-25\u003c\/td\u003e\n\u003ctd\u003e25Nm\u003c\/td\u003e\n\u003ctd\u003eFMF-DC24V-09305-FL-K-25-25NM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSelection Notes\u003c\/h2\u003e\n\u003cp\u003eSelect the torque option that matches your machine design and tension-control requirement. Compare the option name, SKU, product photos, shaft style, and DC24V power requirement with your current machine before ordering.\u003c\/p\u003e\n\u003cp\u003eIf your project requires another magnetic powder clutch or magnetic powder brake model, use the product photos and model details on the target listing to confirm the correct replacement part.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is this magnetic powder clutch used for?\u003c\/h3\u003e\n\u003cp\u003eIt is used for torque and tension control in equipment such as winding, printing, packaging, and textile machines.\u003c\/p\u003e\n\u003ch3\u003eWhich torque options are available?\u003c\/h3\u003e\n\u003cp\u003eThis product offers 6Nm, 12Nm, and 25Nm options: FL-K-06, FL-K-12, and FL-K-25.\u003c\/p\u003e\n\u003ch3\u003eWhat power source should I use?\u003c\/h3\u003e\n\u003cp\u003eUse DC24V only. The product notes warn that using an AC power source can damage the clutch.\u003c\/p\u003e\n\u003ch3\u003eHow should I choose the right option?\u003c\/h3\u003e\n\u003cp\u003eMatch the torque rating, FL-K option, SKU, shaft style, and product images with the requirements of your tension-control system.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"FL K 06 6Nm","offer_id":43370949771353,"sku":"FMF-DC24V-09305-FL-K-06-6NM","price":51.58,"currency_code":"USD","in_stock":true},{"title":"FL K 12 12Nm","offer_id":43370949804121,"sku":"FMF-DC24V-09305-FL-K-12-12NM","price":103.15,"currency_code":"USD","in_stock":true},{"title":"FL K 25 25Nm","offer_id":43370949836889,"sku":"FMF-DC24V-09305-FL-K-25-25NM","price":149.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S044d9928f97f4e769426cd110dfa866ci.webp?v=1780390860"},{"product_id":"epc-a12-edge-line-position-controller","title":"EPC-A12 Kant-\/linjeposisjonskontroller for banestyring","description":"\u003csection\u003e\n\u003ch2\u003eHva denne kontrolleren er\u003c\/h2\u003e\n\u003cp\u003eEPC-A12 er en kant-\/linjeposisjonskontroller for industriell banestyring og korrigering. Den brukes som styreenhet i systemer som trenger kant-, linje-, senter- eller slangekorrigering, inkludert EPC-, LPC-, CPC- og SPC-modusreferanser som vises for dette produktet.\u003c\/p\u003e\n\u003cp\u003eDette produktet er kun kontrolleren. Sensor\/detektor og aktuator\/servomotor følger ikke med.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eProduktdetaljer\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModell\u003c\/th\u003e\n\u003ctd\u003eEPC-A12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProdukttype\u003c\/th\u003e\n\u003ctd\u003eKant-\/linjeposisjonskontroller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eFMF-EPC-A12-33593\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStrømetikett\u003c\/th\u003e\n\u003ctd\u003eDC24V; bakre etikettabell viser 24VDC \/ 6A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBakre kontaketiketter\u003c\/th\u003e\n\u003ctd\u003eStrøm 4P, Servomotor 8P, Detektor 5P, Utvidelsesport 6P\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eKlemmelistetiketter\u003c\/th\u003e\n\u003ctd\u003eMC-port, RS485, 0-10V, OUT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFrontkontroller vist\u003c\/th\u003e\n\u003ctd\u003eAuto, Man, Detect, Cent, Set, Left, Right, ESC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eNår denne modellen passer\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBruk den når du trenger en EPC-A12-kontroller for kant- eller linjeposisjonskorrigering.\u003c\/li\u003e\n\u003cli\u003eBruk den når systemet ditt er bygget rundt en separat detektor\/sensor og servomotor eller aktuator koblet til kontrollerens porter.\u003c\/li\u003e\n\u003cli\u003eBekreft 24VDC-strømkrav, koblingsskjema, detektor, servomotor eller aktuator, og panelplass før bestilling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eViktige bestillingsmerknader\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDenne produktsiden lister ikke sensor, aktuator, servomotor, monteringssett, kabelsett eller ekstern strømforsyning som inkluderte tilbehør.\u003c\/li\u003e\n\u003cli\u003eIkke velg dette produktet som et komplett banestyringssett med mindre du allerede har de nødvendige eksterne komponentene eller planlegger å skaffe dem separat.\u003c\/li\u003e\n\u003cli\u003eHvis du erstatter en eksisterende kontroller, sammenlign EPC-A12-modellnavnet, bakre portetiketter, strømkrav og frontpaneloppsett med din nåværende enhet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eOfte stilte spørsmål\u003c\/h2\u003e\n\u003ch3\u003eEr dette et komplett EPC-A12-banestyringssystem?\u003c\/h3\u003e\n\u003cp\u003eNei. Dette produktet er kun EPC-A12-kant-\/linjeposisjonskontrolleren. Sensor\/detektor og aktuator\/servomotor følger ikke med.\u003c\/p\u003e\n\u003ch3\u003eHvilken strøm bør jeg bekrefte før kjøp?\u003c\/h3\u003e\n\u003cp\u003eDen bakre produktetiketten viser DC24V, og porttabellen viser 24VDC \/ 6A. Bekreft maskinens strømforsyning og koblingsskjema før bestilling.\u003c\/p\u003e\n\u003ch3\u003eHvilke bakre porter er synlige på kontrolleren?\u003c\/h3\u003e\n\u003cp\u003eBakpanelet viser kontakter for strøm, servomotor, detektor og EX-port, samt en klemmelist med MC-port, RS485, 0-10V og OUT-etiketter.\u003c\/p\u003e\n\u003ch3\u003eHvilke korrigeringsmoduser er denne kontrolleren designet for?\u003c\/h3\u003e\n\u003cp\u003eDette produktet refererer til EPC-, LPC-, CPC- og SPC-korrigeringsmoduser. Match kontrolleren med riktig ekstern detektor og aktuator for maskinen din.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Standardtittel","offer_id":43370950983769,"sku":"FMF-EPC-A12-33593","price":260.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S102a65c5a04d47409a59b4a9d171f659S.webp?v=1780390869"},{"product_id":"ktc800a-tension-controller-24v-magnetic-powder-brake-clutch-controller-for-web-tension-control-system","title":"KTC800A Strekkontroller for magnetpulverbrems\/-kobling","description":"\u003csection\u003e\n\u003ch2\u003eProduktoversikt\u003c\/h2\u003e\n\u003cp\u003eStrekkontrolleren KTC800A er en manuell regulator for banestrekkontrollsystemer som bruker magnetpulverbrems eller magnetpulverkobling. Den leverer justerbar DC 0-24V-utgang opp til 4A og bruker pulsbreddemodulasjon for effektiv styring av brems eller kobling.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eViktige detaljer\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModell: KTC800A\u003c\/li\u003e\n\u003cli\u003eBruksområde: banestrekkontroll med magnetpulverbrems eller magnetpulverkobling\u003c\/li\u003e\n\u003cli\u003eInngangseffekt: AC 185-264V\u003c\/li\u003e\n\u003cli\u003eUtgang: DC 0-24V, opp til 4A\u003c\/li\u003e\n\u003cli\u003eStyringsmetode: pulsbreddemodulasjon (PWM)\u003c\/li\u003e\n\u003cli\u003eStyringsmodi: konstant strøm, konstant spenning, konstant effekt eller eksternt potensiometer\u003c\/li\u003e\n\u003cli\u003eSKU-referanse: FMF-KTC800A-99129\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eTekniske spesifikasjoner\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eElement\u003c\/th\u003e\n\u003cth\u003eSpesifikasjon\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModell\u003c\/td\u003e\n\u003ctd\u003eKTC800A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInngangseffekt\u003c\/td\u003e\n\u003ctd\u003eAC 185-264V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUtgangsspenning\/-strøm\u003c\/td\u003e\n\u003ctd\u003eDC 0-24V \/ 4A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrøminnstillingsområde\u003c\/td\u003e\n\u003ctd\u003e0.00-4.00A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStrømjusteringstrinn\u003c\/td\u003e\n\u003ctd\u003e0.01A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUtgangsstyring\u003c\/td\u003e\n\u003ctd\u003ePWM pulsbreddemodulasjon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriftsmodi\u003c\/td\u003e\n\u003ctd\u003eKonstant strøm, konstant spenning, konstant effekt, eksternt potensiometer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eMerknader om modi\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eI konstant strøm-modus lyser indikatoren for konstant strøm på panelet, og knappen justerer innstilt strøm.\u003c\/li\u003e\n\u003cli\u003eHvis den tilkoblede koblingen eller bremsen har lavere merkeeffekt, kan den faktiske strømmen være lavere enn kontrollerens innstilling.\u003c\/li\u003e\n\u003cli\u003eFor eksempel bør en 12Nm magnetpulverkobling merket 24V\/1.2A tilpasses sin merkestrøm i stedet for å bare bruke maksimal utgang.\u003c\/li\u003e\n\u003cli\u003eFør du bruker konstant effekt-modus, må du kalibrere den tilkoblede koblingen eller bremsen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eMerknader om valg\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBekreft at magnetpulverbremsen eller -koblingen krever DC 24V-styring og ligger innenfor 4A-utgangsområdet.\u003c\/li\u003e\n\u003cli\u003eKontroller maskinens koblingsmetode, ønsket styringsmodus og monteringsplass før bestilling.\u003c\/li\u003e\n\u003cli\u003eBruk eksternt potensiometer kun når maskinens kontrolloppsett krever fjernjustering manuelt.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eOfte stilte spørsmål\u003c\/h2\u003e\n\u003ch3\u003eHva styrer KTC800A?\u003c\/h3\u003e\n\u003cp\u003eDen justerer utgangen til en magnetpulverbrems eller magnetpulverkobling slik at maskinen kan kontrollere banestrekk under avrulling, opprulling eller relaterte materialhåndteringsprosesser.\u003c\/p\u003e\n\u003ch3\u003eHva bør jeg bekrefte før bestilling?\u003c\/h3\u003e\n\u003cp\u003eBekreft bremsens eller koblingens spennings- og strømklassifisering, koblingsmetode, styringsmodus, og om utstyret krever konstant strøm, konstant spenning, konstant effekt eller eksternt potensiometer.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Standardtittel","offer_id":43370951049305,"sku":"FMF-KTC800A-99129","price":40.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S0270ccaf20c042518d990f08a56b6b48q.webp?v=1780390871"},{"product_id":"epc-a18-servo-web-guiding-system-ultrasonic-sensor-150mm","title":"EPC-A18 Servo-banestyringssystem med ultralydsensor, 150mm slag","description":"\u003ch2\u003eEPC-A18 servo-banestyringssystem for kantkorrigering\u003c\/h2\u003e\n\u003cp\u003eEPC-A18 er et servo-banestyringssystem for EPC-kantstyring og relatert korrigering av baneposisjon. Denne konfigurasjonen leveres med en ultralydsensor og en 150 mm aktuator for å holde rullematet materiale på linje under produksjon.\u003c\/p\u003e\n\u003ch2\u003eNøkkeldetaljer\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModell\u003c\/th\u003e\n\u003ctd\u003eEPC-A18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSystemtype\u003c\/th\u003e\n\u003ctd\u003eServo-banestyring \/ kantposisjonskontrollsystem\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSensor i denne konfigurasjonen\u003c\/th\u003e\n\u003ctd\u003eUltralydsensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAktuatorslag\u003c\/th\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStyringsmoduser\u003c\/th\u003e\n\u003ctd\u003eEPC-kantstyring, LPC-linjestyring, CPC-senterstyring og SPC-oscillerende korreksjon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStøttede sensortyper\u003c\/th\u003e\n\u003ctd\u003eFotoelektrisk sensor, ultralydsensor, fargemerkesensor og relaterte banestyringssensorer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGrensesnitt\u003c\/th\u003e\n\u003ctd\u003eFargeberøringsskjerm HMI med parameterveiledning og online hjelpefunksjoner\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU-referanse\u003c\/th\u003e\n\u003ctd\u003eFMF-EPC-A18-44313\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eTypiske bruksområder\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFilm, papir, fleksibel emballasje og justering av banematerialer.\u003c\/li\u003e\n\u003cli\u003eEmballasjemaskiner som krever automatisk kantkorrigering.\u003c\/li\u003e\n\u003cli\u003eBatteriproduksjonslinjer som trenger stabil banestyring.\u003c\/li\u003e\n\u003cli\u003eTekstil- og stoffhåndteringslinjer som krever kantsporing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFør bestilling\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBekreft nødvendig sensortype, aktuatorslag og monteringsplass på maskinen.\u003c\/li\u003e\n\u003cli\u003eSjekk om prosessen krever kantstyring, linjestyring, senterstyring eller oscillerende korreksjon.\u003c\/li\u003e\n\u003cli\u003eSammenlign kontroller, sensor, aktuator og kabeloppsett med ditt nåværende banestyringssystem.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOfte stilte spørsmål\u003c\/h2\u003e\n\u003ch3\u003eHva brukes dette systemet til?\u003c\/h3\u003e\n\u003cp\u003eDet brukes til å detektere baneposisjon og utføre korreksjon slik at rullematet materiale holdes på linje under produksjon.\u003c\/p\u003e\n\u003ch3\u003eEr denne konfigurasjonen for et 150 mm slag?\u003c\/h3\u003e\n\u003cp\u003eJa. Denne produktsiden er for et EPC-A18 servo-banestyringssystem konfigurert med ultralydsensor og 150 mm slag.\u003c\/p\u003e\n\u003ch3\u003eKan den støtte ulike banestyringsmoduser?\u003c\/h3\u003e\n\u003cp\u003eJa. Produktinformasjonen viser EPC-kantstyring, LPC-linjestyring, CPC-senterstyring og SPC-oscillerende korreksjon.\u003c\/p\u003e\n\u003ch3\u003eHva bør jeg sjekke før kjøp?\u003c\/h3\u003e\n\u003cp\u003eSjekk sensortype, aktuatorslag, monteringsplass, kabling og styringsmodus som kreves av materialet og produksjonslinjen.\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Standardtittel","offer_id":43370953769049,"sku":"FMF-EPC-A18-44313","price":508.39,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S385affa5f7304529928a41b03f41beded.webp?v=1780390897"},{"product_id":"ps-400s-us-400s-zps-2-epc-web-guide-sensor-mount-bracket-adjustable-holder-for-ultrasonic-photoelectric-ccd-edge-tracking-sensor","title":"PS-400S US-400S ZPS-2 Web Guide Edge Sensor \u0026 Adjustable Mount Bracket","description":"\u003csection\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003ePS-400S, US-400S, ZPS-2 and the matching adjustable mounting bracket are web guide edge tracking parts for EPC systems. Use the option selector to choose the photoelectric sensor, ultrasonic edge sensor, ZPS-2 sensor, or bracket needed for your web guiding setup.\u003c\/p\u003e\n\u003cp\u003eThe adjustable bracket helps position edge tracking sensors for roll material alignment. The sensor options are used with EPC web guide systems for film, paper, tape and other supported roll materials.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eAvailable Options\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\" border=\"1\" cellspacing=\"0\" cellpadding=\"8\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"text-align: left;\"\u003eOption\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eSKU\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eTypical role\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Bracket\u003c\/td\u003e\n\u003ctd\u003eFMF-PS-400S-71993-MOUNTING-BRACKET\u003c\/td\u003e\n\u003ctd\u003eAdjustable holder for positioning a compatible web guide edge sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUS-400S\u003c\/td\u003e\n\u003ctd\u003eFMF-PS-400S-71993-US-400S\u003c\/td\u003e\n\u003ctd\u003eUltrasonic edge sensor option for EPC web guiding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePS-400S\u003c\/td\u003e\n\u003ctd\u003eFMF-PS-400S-71993-PS-400S\u003c\/td\u003e\n\u003ctd\u003ePhotoelectric edge sensor option for EPC web guiding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eZPS-2\u003c\/td\u003e\n\u003ctd\u003eFMF-PS-400S-71993-ZPS-2\u003c\/td\u003e\n\u003ctd\u003ePhotoelectric sensor option for edge tracking systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSelection Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eChoose the bracket when you only need the adjustable sensor holder.\u003c\/li\u003e\n\u003cli\u003eChoose US-400S when your setup calls for an ultrasonic edge sensor for EPC web guiding.\u003c\/li\u003e\n\u003cli\u003eChoose PS-400S when your setup calls for a photoelectric edge sensor.\u003c\/li\u003e\n\u003cli\u003eChoose ZPS-2 only when that exact sensor model matches your machine or replacement requirement.\u003c\/li\u003e\n\u003cli\u003eConfirm the model name, connector\/cable needs, controller compatibility and installation dimensions before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eMaterial Fit and Limits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable applications listed for this product include film, paper, tape and other roll materials used in web guiding.\u003c\/li\u003e\n\u003cli\u003eThe ultrasonic option is described for non-breathable materials such as plastic film and paper.\u003c\/li\u003e\n\u003cli\u003eDo not use this listing as confirmation for breathable fabric or non-woven material applications unless your machine supplier confirms the exact sensor choice.\u003c\/li\u003e\n\u003cli\u003eExact wiring, voltage, output signal, detection range and accuracy should be checked against your machine requirements or supplier documentation before purchase.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs this listing for a bracket or for sensors?\u003c\/h3\u003e\n\u003cp\u003eIt includes selectable options. You can choose the mounting bracket, US-400S ultrasonic edge sensor, PS-400S photoelectric edge sensor, or ZPS-2 sensor option from the product selector.\u003c\/p\u003e\n\u003ch3\u003eWhat is it used for?\u003c\/h3\u003e\n\u003cp\u003eThese parts are used around EPC web guide edge tracking systems to detect or position the edge of roll materials such as film, paper and tape.\u003c\/p\u003e\n\u003ch3\u003eCan I use it for non-woven fabric?\u003c\/h3\u003e\n\u003cp\u003eThe current product information says breathable materials such as fabric and non-woven materials are not suitable. Please confirm with your machine supplier before using it for those materials.\u003c\/p\u003e\n\u003ch3\u003eWhat should I confirm before ordering?\u003c\/h3\u003e\n\u003cp\u003eConfirm the exact model, sensor type, mounting requirement, cable or connector needs, controller compatibility and installation space. If your machine requires a specific voltage, output or detection range, verify those details before ordering.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Mounting Bracket","offer_id":43370954260569,"sku":"FMF-PS-400S-71993-MOUNTING-BRACKET","price":24.02,"currency_code":"USD","in_stock":true},{"title":"US-400S","offer_id":43370954293337,"sku":"FMF-PS-400S-71993-US-400S","price":75.15,"currency_code":"USD","in_stock":true},{"title":"PS-400S","offer_id":43370954326105,"sku":"FMF-PS-400S-71993-PS-400S","price":62.04,"currency_code":"USD","in_stock":true},{"title":"ZPS-2","offer_id":43370954358873,"sku":"FMF-PS-400S-71993-ZPS-2","price":55.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sd13d490dcea54bff97c4e3059f1fe8705.webp?v=1780390903"},{"product_id":"gdj-211-color-mark-sensor-photo-eye-gdj211bg-bag-making-machine-photoelectric-sensor-detector","title":"GDJ-211 Color Mark Photoelectric Sensor GDJ211BG for Bag Making Machines","description":"\u003csection\u003e\n\u003ch2\u003eGDJ-211 Color Mark Photoelectric Sensor for Bag Making Machines\u003c\/h2\u003e\n\u003cp\u003eThe GDJ-211 \/ GDJ211BG is a color mark photoelectric sensor photo eye supplied for bag making machine and industrial automation sensor replacement needs. It is listed under FMF Supply's automation control components with SKU FMF-GDJ-211-17177.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eGDJ-211 \/ GDJ211BG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003ePhotoelectric sensor \/ color mark sensor photo eye\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApplication wording\u003c\/th\u003e\n\u003ctd\u003eBag making machine photoelectric sensor detector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eFMF-GDJ-211-17177\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStore category\u003c\/th\u003e\n\u003ctd\u003eBusiness \u0026amp; Industrial automation control component\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSelection Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse this page when you are matching the GDJ-211 or GDJ211BG model name, color mark sensor wording, or photo eye sensor wording from your existing machine.\u003c\/li\u003e\n\u003cli\u003eCompare the product images and SKU with your current sensor before ordering.\u003c\/li\u003e\n\u003cli\u003eIf your installation depends on wiring, voltage, output mode, detection distance, or controller compatibility, confirm those specifications before purchase because they are not in the current listing data.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs This product for the GDJ-211 \/ GDJ211BG sensor?\u003c\/h3\u003e\n\u003cp\u003eYes. The Shopify product data identifies this item as GDJ-211 \/ GDJ211BG, a color mark photoelectric sensor photo eye.\u003c\/p\u003e\n\u003ch3\u003eCan I use it for a bag making machine?\u003c\/h3\u003e\n\u003cp\u003eThe product details data describes it as a bag making machine photoelectric sensor detector. Match the model and physical sensor style with your machine before ordering.\u003c\/p\u003e\n\u003ch3\u003eAre voltage, output, or wiring details confirmed?\u003c\/h3\u003e\n\u003cp\u003eNot in the current product details data. Confirm those electrical details before purchase if they are required for your installation.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Standardtittel","offer_id":43370956390489,"sku":"FMF-GDJ-211-17177","price":51.28,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Seea1895e08fd4698877a5221bc5f4847k.webp?v=1780390931"},{"product_id":"pg600a-web-guiding-control-system-600mm-edge-controller","title":"PG600A All-in-One Web Guiding Control System, 600mm Line Edge Controller","description":"\u003ch2\u003ePG600A all-in-one web guiding control system\u003c\/h2\u003e\n\u003cp\u003eThe PG600A is an all-in-one web guiding control system for line and edge position correction in printing, packaging, label, and non-woven production lines. It is designed for roll-fed materials where the web position must be kept aligned during continuous processing.\u003c\/p\u003e\n\u003ch2\u003eKey details\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003ePG600A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSystem type\u003c\/th\u003e\n\u003ctd\u003eAll-in-one web guiding control system \/ line edge position controller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eListed configuration\u003c\/th\u003e\n\u003ctd\u003e600 mm line edge position controller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTypical industries\u003c\/th\u003e\n\u003ctd\u003eLabel printing, packaging, and non-woven production\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDrive and positioning\u003c\/th\u003e\n\u003ctd\u003ePrecision ball screw bar for positioning control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGuiding speed\u003c\/th\u003e\n\u003ctd\u003e40 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWorking environment\u003c\/th\u003e\n\u003ctd\u003e-10 to 60 C, RH below 90%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSensor options\u003c\/th\u003e\n\u003ctd\u003eUltrasonic, photoelectric, color mark, or CCD sensor selection based on material type\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSensor installation\u003c\/th\u003e\n\u003ctd\u003eLeft or right sensor position should be confirmed before ordering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU reference\u003c\/th\u003e\n\u003ctd\u003eFMF-PG600A-87193\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eApplication fit\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrinting and packaging lines that need line or edge correction.\u003c\/li\u003e\n\u003cli\u003eLabel production where material alignment affects print and cutting accuracy.\u003c\/li\u003e\n\u003cli\u003eNon-woven material handling and other flexible web processes.\u003c\/li\u003e\n\u003cli\u003eCustom roller length, roller width, sensor position, and fixture choices when the machine layout requires confirmation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm the web width, roller size, available mounting space, and required guiding travel.\u003c\/li\u003e\n\u003cli\u003eSelect the sensor type according to material behavior, transparency, color mark use, and edge detection method.\u003c\/li\u003e\n\u003cli\u003eConfirm whether your cutting station needs a manual fixture or air fixture.\u003c\/li\u003e\n\u003cli\u003eShare the left\/right sensor position and any custom size requirements before production.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is the PG600A used for?\u003c\/h3\u003e\n\u003cp\u003eIt is used to control web line or edge position so roll-fed material stays aligned during printing, packaging, labeling, or non-woven production.\u003c\/p\u003e\n\u003ch3\u003eWhich sensor type should I choose?\u003c\/h3\u003e\n\u003cp\u003eThe product information lists ultrasonic, photoelectric, color mark, and CCD sensor options. The right choice depends on the material type, edge condition, and whether the process tracks an edge, line, or mark.\u003c\/p\u003e\n\u003ch3\u003eCan the roller and fixture be customized?\u003c\/h3\u003e\n\u003cp\u003eThe product information lists customizable roller length and width, plus manual or air fixture options at the cutting station. Confirm the required dimensions and fixture style before ordering.\u003c\/p\u003e\n\u003ch3\u003eWhat should I verify before purchase?\u003c\/h3\u003e\n\u003cp\u003eConfirm web width, mounting dimensions, sensor type, sensor side, fixture style, and the machine layout so the PG600A configuration matches your production line.\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Standardtittel","offer_id":43370960846937,"sku":"FMF-PG600A-87193","price":1154.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S67d8eb1f99c545e694a438183f820f29A.webp?v=1780391035"},{"product_id":"epc-a12-edge-guiding-system-web-guide-controller-sensor-servo-actuator-edge-position-control","title":"EPC-A12 Web Guide Controller Kit with Sensor and Servo Actuator","description":"\u003cp\u003e\u003cstrong\u003eEPC-A12 web guide controller kit\u003c\/strong\u003e for industrial web, roll and strip position correction. This listing is a single-sensor kit: one EPC-A12 controller, one selected sensor type and one PD-204L150T servo actuator. The controller can be used in different correction setups, but the working mode depends on the matched sensor signal, the number of sensors, the actuator or guide-frame layout and the controller settings.\u003c\/p\u003e\n\n\u003ch2\u003eKit Configuration and Mode Selection\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThis product kit:\u003c\/strong\u003e one sensor is included. Choose either the ultrasonic sensor type or the photoelectric sensor type.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle edge or single line correction:\u003c\/strong\u003e a single-sensor setup is normally used for single-side edge guiding or single-line guiding.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eCenter or serpentine correction:\u003c\/strong\u003e this normally requires two same-type sensors, plus the matched actuator or center guide frame and two sensor brackets.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSensor type must be selected in the controller:\u003c\/strong\u003e the controller menu supports ultrasonic, photoelectric and optional HCCD detector selection. This listing offers ultrasonic or photoelectric variants only.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDo not treat EPC\/LPC\/CPC\/SPC as sensor-only functions:\u003c\/strong\u003e they are correction modes created by the controller, sensor input, mechanical installation and setup working together.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eCorrection Modes\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\" border=\"1\" cellspacing=\"0\" cellpadding=\"8\"\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align: left;\"\u003eMode\u003c\/th\u003e\n      \u003cth style=\"text-align: left;\"\u003eMeaning\u003c\/th\u003e\n      \u003cth style=\"text-align: left;\"\u003eWhat the buyer should confirm\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eEPC\u003c\/td\u003e\n      \u003ctd\u003eEdge Position Control, edge guiding\u003c\/td\u003e\n      \u003ctd\u003eUsually fits the single-sensor kit when the selected sensor can detect the material edge.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eLPC\u003c\/td\u003e\n      \u003ctd\u003eLine Position Control, line tracking\u003c\/td\u003e\n      \u003ctd\u003eRequires a detectable line, mark or signal condition. The single-sensor package can be used only when the sensor and material setup are suitable.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eCPC\u003c\/td\u003e\n      \u003ctd\u003eCenter Position Control, center guiding\u003c\/td\u003e\n      \u003ctd\u003eNormally needs two same-type sensors and the matched guide-frame or actuator layout. Ask for a dual-sensor configuration.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eSPC\u003c\/td\u003e\n      \u003ctd\u003eSerpentine Position Control, offset or serpentine correction\u003c\/td\u003e\n      \u003ctd\u003eNormally needs two same-type sensors, proper actuator layout and parameter setup. Ask before ordering a standard single-sensor kit.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eSensor Type Selection\u003c\/h2\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\" border=\"1\" cellspacing=\"0\" cellpadding=\"8\"\u003e\n  \u003cthead\u003e\n    \u003ctr\u003e\n      \u003cth style=\"text-align: left;\"\u003eSensor option\u003c\/th\u003e\n      \u003cth style=\"text-align: left;\"\u003eBest-fit use\u003c\/th\u003e\n      \u003cth style=\"text-align: left;\"\u003eSetup notes\u003c\/th\u003e\n    \u003c\/tr\u003e\n  \u003c\/thead\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eUS-400S ultrasonic sensor\u003c\/td\u003e\n      \u003ctd\u003eEdge guiding for transparent, opaque and very transparent non-breathable web materials such as plastic film, paper and foil.\u003c\/td\u003e\n      \u003ctd\u003eUltrasonic detection is not affected by material transparency and normally does not need material transparency calibration. Not suitable for breathable or porous materials such as cloth and non-woven fabric.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003ePS-400S photoelectric sensor\u003c\/td\u003e\n      \u003ctd\u003eEdge guiding where the material edge can be detected reliably by photoelectric through-beam sensing.\u003c\/td\u003e\n      \u003ctd\u003ePhotoelectric detection is affected by material color, transparency and reflectivity, so it needs calibration for different materials. It is commonly used for opaque material edge guiding.\u003c\/td\u003e\n    \u003c\/tr\u003e\n    \u003ctr\u003e\n      \u003ctd\u003eOptional HCCD sensor\u003c\/td\u003e\n      \u003ctd\u003eLine, pattern, contrast edge or more complex target tracking.\u003c\/td\u003e\n      \u003ctd\u003eOptional HCCD detection can track material edge, contrast edge, line and pattern targets. HCCD is not included in this listing unless quoted separately.\u003c\/td\u003e\n    \u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eController and Actuator Specifications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eController supply: DC24 V to DC45 V, standard 24 V.\u003c\/li\u003e\n  \u003cli\u003eSensor supply: DC12 V, 350 mA max.\u003c\/li\u003e\n  \u003cli\u003eAnalog input: 3 channels, 0-5 V, 20 K impedance, 12-bit ADC.\u003c\/li\u003e\n  \u003cli\u003eSwitch input: 3 NPN inputs.\u003c\/li\u003e\n  \u003cli\u003eCorrection response time: 0.5 ms.\u003c\/li\u003e\n  \u003cli\u003eSupported detector type selection: ultrasonic, photoelectric and optional HCCD.\u003c\/li\u003e\n  \u003cli\u003ePD-204L150 actuator family: 150 mm stroke, 2 kN class thrust, 40 mm\/s max drive speed, +\/-75 mm travel reference.\u003c\/li\u003e\n  \u003cli\u003eServo actuator design: brushless DC servo motor with precision ball screw and encoder-based position calculation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat Is Included\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1 x EPC-A12 web guide controller.\u003c\/li\u003e\n  \u003cli\u003e1 x selected sensor type: ultrasonic type or photoelectric type.\u003c\/li\u003e\n  \u003cli\u003e1 x PD-204L150T servo actuator.\u003c\/li\u003e\n  \u003cli\u003eSensor bracket, power supply and connection cables as supplied with the kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e this standard listing is not a dual-sensor CPC\/SPC package. If your project needs center guiding, serpentine correction, HCCD tracking or a guide-frame version, confirm the required sensor quantity and mechanical layout before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eFilm, paper, foil, label, printing and converting web guide applications.\u003c\/li\u003e\n  \u003cli\u003eBag making machines, slitting machines, cutters, rewinders and roll-to-roll equipment.\u003c\/li\u003e\n  \u003cli\u003eIndustrial edge guiding where material edge or line position must be corrected during web movement.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eDoes one ultrasonic or photoelectric sensor realize EPC, LPC, CPC and SPC?\u003c\/h3\u003e\n\u003cp\u003eNo. EPC, LPC, CPC and SPC are controller-based correction modes. A single sensor is normally used for single edge or single line guiding. CPC and SPC normally require two same-type sensors and the matched mechanical setup.\u003c\/p\u003e\n\n\u003ch3\u003eWhich sensor should I choose for transparent film?\u003c\/h3\u003e\n\u003cp\u003eChoose ultrasonic when the web is non-breathable and transparency makes photoelectric detection difficult. Ultrasonic detection is not affected by transparency, but it is not recommended for breathable materials such as cloth or non-woven fabric.\u003c\/p\u003e\n\n\u003ch3\u003eWhen should I choose photoelectric?\u003c\/h3\u003e\n\u003cp\u003eChoose photoelectric when the material edge can be detected reliably by photoelectric through-beam sensing, especially for opaque or stable materials. Photoelectric sensing needs calibration because color, transparency and reflectivity can change the signal.\u003c\/p\u003e\n\n\u003ch3\u003eCan this kit do center guiding or serpentine correction?\u003c\/h3\u003e\n\u003cp\u003eThe controller supports those correction setups, but the standard single-sensor listing is not the complete CPC or SPC package. For center guiding or serpentine correction, ask for the dual-sensor configuration and confirm the guide-frame or actuator layout.\u003c\/p\u003e\n\n\u003ch3\u003eWhat information should I send before ordering?\u003c\/h3\u003e\n\u003cp\u003eSend your material type, transparency or breathability, web width, required correction mode, machine speed, actuator stroke requirement and whether you need edge, line, center or serpentine correction.\u003c\/p\u003e\n","brand":"FMF","offers":[{"title":"Photoelectric Type","offer_id":43370966712409,"sku":"FMF-EPC-A12-19353-PHOTOELECTRIC-TYPE","price":677.86,"currency_code":"USD","in_stock":true},{"title":"Ultrasonic Type","offer_id":43370966745177,"sku":"FMF-EPC-A12-19353-ULTRASONIC-TYPE","price":677.86,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Se879eabaca7a4a419586b77af78c1351J.webp?v=1780391147"},{"product_id":"epc-a12-ccd-edge-line-web-guide-system-pd403l150t-400kg-actuator","title":"EPC-A12 CCD Edge\/Line Web Guide System with PD403L150T 400kg Actuator","description":"\u003ch2\u003eEPC-A12 CCD edge\/line web guide system with PD403L150T actuator\u003c\/h2\u003e\n\u003cp\u003eThis listing is for an EPC-A12 controller kit supplied with an HCCD\/CCD camera sensor and a PD403L150T servo actuator. In this configuration, the set is intended for visible edge, contrast edge, printed line, printed mark and pattern tracking on roll-to-roll web materials.\u003c\/p\u003e\n\u003cp\u003eThe EPC-A12 controller platform can work with different sensor categories when the correct sensor is matched to the guiding task. This page is for the CCD camera sensor configuration. Ultrasonic, photoelectric and other sensor setups are separate configurations unless specifically confirmed.\u003c\/p\u003e\n\u003ch3\u003eWhat this CCD set is for\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEdge\/line position control where the CCD sensor can see a clear edge, line, printed mark or contrast target\u003c\/li\u003e\n  \u003cli\u003ePrinted web guiding for packaging, label, film and converting lines\u003c\/li\u003e\n  \u003cli\u003eEPC edge guiding and LPC line guiding tasks that need camera-based target recognition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSensor fit\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eIncluded sensor type\u003c\/td\u003e\n\u003ctd\u003eHCCD\/CCD digital camera sensor for line position and edge\/mark tracking\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBest-fit targets\u003c\/td\u003e\n\u003ctd\u003eVisible edge, contrast edge, printed line, printed mark, pattern target\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBefore ordering\u003c\/td\u003e\n\u003ctd\u003eIf the target is transparent, low contrast, irregular, or difficult to see, share material photos, line speed and guiding target so the sensor match can be checked.\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eController platform capability vs. this kit\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEPC edge guiding\u003c\/td\u003e\n\u003ctd\u003eAvailable when the CCD sensor can identify the web edge or contrast edge\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLPC line guiding\u003c\/td\u003e\n\u003ctd\u003eAvailable when the CCD sensor can identify a visible line, printed mark or pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCPC center guiding\u003c\/td\u003e\n\u003ctd\u003eRequires a matching center or dual-edge sensor arrangement\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSPC serpentine correction\u003c\/td\u003e\n\u003ctd\u003eDepends on the machine layout and matched sensor\/control configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMain features of the included set\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEPC-A12 edge\/line position controller with color screen and manual\/auto controls\u003c\/li\u003e\n  \u003cli\u003eHCCD\/CCD camera sensor for visible edge, line, printed mark and pattern tracking\u003c\/li\u003e\n  \u003cli\u003ePD403L150T precision linear actuator with 150 mm travel, 400 kg thrust and 30 mm\/s speed\u003c\/li\u003e\n  \u003cli\u003eLinear position encoder feedback on the included actuator\u003c\/li\u003e\n  \u003cli\u003eIncluded power supply accepts 100-240V AC input\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEPC-A12 edge\/line position controller\u003c\/td\u003e\n\u003ctd\u003e1 set\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHCCD\/CCD camera sensor\u003c\/td\u003e\n\u003ctd\u003e1 pc\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePD403L150T servo actuator\u003c\/td\u003e\n\u003ctd\u003e1 set\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e1 pc, AC100-240V input\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCables and bracket mount\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eEPC-A12 controller specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eEPC-A12\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eController supply voltage\u003c\/td\u003e\n\u003ctd\u003eDC 24V-45V, standard 24V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMotor drive capacity\u003c\/td\u003e\n\u003ctd\u003e24V-45V, max 10A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEncoder power supply\u003c\/td\u003e\n\u003ctd\u003eDC 15V, max 200mA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAnalog inputs\u003c\/td\u003e\n\u003ctd\u003e3 channels, 0-5V, 20K ohm impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSensor power supply\u003c\/td\u003e\n\u003ctd\u003eDC 12V, max 350mA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCorrection response time\u003c\/td\u003e\n\u003ctd\u003e0.5 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAnalog input resolution\u003c\/td\u003e\n\u003ctd\u003e12-bit ADC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSwitch inputs\u003c\/td\u003e\n\u003ctd\u003e3-channel NPN\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSupported sensor categories\u003c\/td\u003e\n\u003ctd\u003eUltrasonic, photoelectric and CCD, matched according to the guiding task\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eController drive speed range\u003c\/td\u003e\n\u003ctd\u003e1-75 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProtection rating\u003c\/td\u003e\n\u003ctd\u003eIP53\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eIncluded CCD sensor and actuator\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCCD sensor use\u003c\/td\u003e\n\u003ctd\u003eVisible edge, contrast edge, line, printed mark and pattern tracking\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSensor setup\u003c\/td\u003e\n\u003ctd\u003eTarget setup is required so the sensor knows what edge, line or mark to track\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator model\u003c\/td\u003e\n\u003ctd\u003ePD403L150T\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator application\u003c\/td\u003e\n\u003ctd\u003eEPC\/LPC web guiding system\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator travel\u003c\/td\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator thrust\u003c\/td\u003e\n\u003ctd\u003e400 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator speed\u003c\/td\u003e\n\u003ctd\u003e30 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePosition feedback\u003c\/td\u003e\n\u003ctd\u003eLinear position encoder\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrdering notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThis standard set includes the HCCD\/CCD camera sensor and PD403L150T actuator.\u003c\/li\u003e\n  \u003cli\u003eIt does not include ultrasonic, photoelectric or dual-edge center-guiding hardware unless separately confirmed.\u003c\/li\u003e\n  \u003cli\u003eFor low-contrast targets, transparent targets, center guiding, serpentine correction setup or a different actuator stroke\/thrust, contact us before ordering.\u003c\/li\u003e\n  \u003cli\u003eThe plug and voltage are configured according to the customer's shipping country by default.\u003c\/li\u003e\n  \u003cli\u003eFor matching support, share the web material, web width, line speed, target type and installation space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is included in this EPC-A12 set?\u003c\/h4\u003e\n\u003cp\u003eOne set includes the EPC-A12 edge\/line controller, HCCD\/CCD camera sensor, PD403L150T servo actuator, AC100-240V power supply, cables and bracket mount.\u003c\/p\u003e\n\u003ch4\u003eWhat guiding task is this CCD set for?\u003c\/h4\u003e\n\u003cp\u003eIt is for camera-based edge and line guiding where the sensor can identify a visible edge, contrast edge, printed line, printed mark or pattern.\u003c\/p\u003e\n\u003ch4\u003eCan it track printed marks?\u003c\/h4\u003e\n\u003cp\u003eYes. The included CCD sensor is intended for visible printed mark, line and pattern tracking after the target is set up.\u003c\/p\u003e\n\u003ch4\u003eCan this standard set do center guiding?\u003c\/h4\u003e\n\u003cp\u003eThe EPC-A12 controller can be configured for more than one guiding mode, but this standard CCD set is sold for edge\/line target tracking. Center guiding needs the matching sensor arrangement.\u003c\/p\u003e\n\u003ch4\u003eWhat actuator is included?\u003c\/h4\u003e\n\u003cp\u003eThe included actuator is PD403L150T, with 150 mm travel, 400 kg thrust, 30 mm\/s speed and linear position encoder feedback.\u003c\/p\u003e\n\u003ch4\u003eWhat should I check before ordering?\u003c\/h4\u003e\n\u003cp\u003eCheck whether the CCD sensor can clearly see the edge, line, printed mark or pattern to be tracked. For transparent, low-contrast or irregular targets, contact us before ordering.\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Standardtittel","offer_id":43370966843481,"sku":"FMF-EPC-A12-17657","price":1071.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sa490e897cea5498fa814b23de42bac8d4.webp?v=1780391150"},{"product_id":"epc-a12sr-servo-edge-web-guide-kit-us-400s-ultrasonic-sensor-150mm-2kn-actuator","title":"EPC-A12SR Servo Edge Web Guide Kit with US-400S Ultrasonic Sensor, 150mm 2KN Actuator","description":"\u003ch2\u003eEPC-A12SR servo edge web guide kit with US-400S ultrasonic sensor\u003c\/h2\u003e\n\u003cp\u003eThis listing is for an EPC-A12SR controller kit supplied with a US-400S ultrasonic edge sensor and a PD-204L150T servo actuator. In this standard configuration, the set is intended for non-contact edge detection and servo edge correction on non-breathable moving web materials.\u003c\/p\u003e\n\u003cp\u003eThe US-400S ultrasonic sensor in this set is not suitable for cloth, woven fabric, mesh, porous web material or breathable material. If your material allows air to pass through it, contact us before ordering so we can help check a different sensor configuration.\u003c\/p\u003e\n\u003cp\u003eThe EPC-A12SR controller platform can support more than one guiding mode when it is matched with the required sensor and actuator configuration. Those controller-level capabilities are separate from what is included in this US-400S kit.\u003c\/p\u003e\n\u003ch3\u003eWhat this standard set is for\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSingle-edge web guiding \/ edge position control on non-breathable moving web materials\u003c\/li\u003e\n  \u003cli\u003eFilm, foil, label stock, plastic sheet and non-breathable strip material edge alignment\u003c\/li\u003e\n  \u003cli\u003ePrinting, packaging, slitting, winding, rewinding and converting lines that need automatic lateral edge correction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMaterial fit\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRecommended for this US-400S set\u003c\/td\u003e\n\u003ctd\u003eNon-breathable film, foil, label stock, plastic sheet and similar non-porous web materials\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNot suitable for this US-400S set\u003c\/td\u003e\n\u003ctd\u003eCloth, woven fabric, mesh, porous web material and breathable material\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eController platform capability vs. this kit\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEPC edge guiding\u003c\/td\u003e\n\u003ctd\u003eIncluded with this US-400S ultrasonic edge sensor set for suitable non-breathable materials\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eLPC line guiding\u003c\/td\u003e\n\u003ctd\u003eRequires a suitable line, color mark, optical or CCD detection setup\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCPC center guiding\u003c\/td\u003e\n\u003ctd\u003eRequires a matching center or dual-edge sensor arrangement\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSPC serpentine correction\u003c\/td\u003e\n\u003ctd\u003eDepends on the machine layout and matched sensor\/control configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eMain features of the included set\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEPC-A12SR edge\/line position controller used here as an ultrasonic edge guiding controller\u003c\/li\u003e\n  \u003cli\u003ePD-204L150T servo actuator with 150 mm stroke and 2KN \/ 200 kgf thrust\u003c\/li\u003e\n  \u003cli\u003eUS-400S ultrasonic sensor for non-contact web edge detection on suitable non-breathable materials\u003c\/li\u003e\n  \u003cli\u003eColor HMI controller with manual\/auto operation and direction controls\u003c\/li\u003e\n  \u003cli\u003eIncluded power supply accepts 100-240V AC input and outputs 24V DC for the control system\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage contents\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eEPC-A12SR correction controller\u003c\/td\u003e\n\u003ctd\u003e1 pc\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePD-204L150T servo actuator\u003c\/td\u003e\n\u003ctd\u003e1 pc\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUS-400S ultrasonic edge sensor\u003c\/td\u003e\n\u003ctd\u003e1 pc\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003e1 pc, 100-240V AC input\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eConnecting cables\u003c\/td\u003e\n\u003ctd\u003e3 pcs\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMounting bracket\u003c\/td\u003e\n\u003ctd\u003e1 pc\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eController specifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eEPC-A12SR\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eController supply voltage\u003c\/td\u003e\n\u003ctd\u003eDC 24V-45V, standard 24V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMotor drive capacity\u003c\/td\u003e\n\u003ctd\u003e24V-45V, max 10A\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAnalog inputs\u003c\/td\u003e\n\u003ctd\u003e3 channels, 0-5V, 20K ohm impedance\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSensor power supply\u003c\/td\u003e\n\u003ctd\u003eDC 12V, max 350mA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCorrection response time\u003c\/td\u003e\n\u003ctd\u003e0.5 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAnalog input resolution\u003c\/td\u003e\n\u003ctd\u003e12-bit ADC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSwitch inputs\u003c\/td\u003e\n\u003ctd\u003e3-channel NPN\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSupported sensor categories\u003c\/td\u003e\n\u003ctd\u003eUltrasonic, photoelectric, color mark, CCD, matched according to the guiding task\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eController drive speed range\u003c\/td\u003e\n\u003ctd\u003e1-75 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProtection rating\u003c\/td\u003e\n\u003ctd\u003eIP53\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eIncluded US-400S sensor and actuator\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUltrasonic sensor model\u003c\/td\u003e\n\u003ctd\u003eUS-400S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSensor use in this set\u003c\/td\u003e\n\u003ctd\u003eNon-contact edge detection on suitable non-breathable web materials\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSensor supply\u003c\/td\u003e\n\u003ctd\u003eDC 12V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSensor output\u003c\/td\u003e\n\u003ctd\u003eDC 0-5V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDetection range\u003c\/td\u003e\n\u003ctd\u003e8 mm (+\/-4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDetection accuracy\u003c\/td\u003e\n\u003ctd\u003e0.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator model\u003c\/td\u003e\n\u003ctd\u003ePD-204L150T\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator thrust\u003c\/td\u003e\n\u003ctd\u003e2KN \/ 200 kgf\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eActuator stroke\u003c\/td\u003e\n\u003ctd\u003e150 mm (+\/-75 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eMaximum actuator speed\u003c\/td\u003e\n\u003ctd\u003e40 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eOrdering notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eThis standard set includes the US-400S ultrasonic edge sensor and PD-204L150T actuator.\u003c\/li\u003e\n  \u003cli\u003eDo not choose this US-400S set for cloth, woven fabric, mesh, porous web material or breathable material.\u003c\/li\u003e\n  \u003cli\u003eIt does not include photoelectric, color mark, CCD or dual-edge center-guiding hardware unless separately confirmed.\u003c\/li\u003e\n  \u003cli\u003eFor breathable materials, line guiding, color mark tracking, CCD detection, center guiding, serpentine correction setup or a different actuator stroke\/thrust, contact us before ordering.\u003c\/li\u003e\n  \u003cli\u003eThe plug and voltage are configured according to the customer's shipping country by default.\u003c\/li\u003e\n  \u003cli\u003eFor matching support, share the web material, web width, line speed, guiding mode and installation space.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat is included in this EPC-A12SR set?\u003c\/h4\u003e\n\u003cp\u003eOne set includes the EPC-A12SR controller, PD-204L150T servo actuator, US-400S ultrasonic edge sensor, power supply, connecting cables and mounting bracket.\u003c\/p\u003e\n\u003ch4\u003eWhat guiding task is this standard US-400S set for?\u003c\/h4\u003e\n\u003cp\u003eIt is for ultrasonic edge detection and servo edge correction on suitable non-breathable moving web materials.\u003c\/p\u003e\n\u003ch4\u003eCan I use this US-400S set for cloth or breathable material?\u003c\/h4\u003e\n\u003cp\u003eNo. The US-400S ultrasonic sensor in this set is not suitable for cloth, woven fabric, mesh, porous web material or breathable material.\u003c\/p\u003e\n\u003ch4\u003eCan this standard set do line guiding or center guiding?\u003c\/h4\u003e\n\u003cp\u003eThe EPC-A12SR controller can be configured for those modes, but this standard US-400S set is sold as an ultrasonic edge guiding kit. Line guiding, color mark tracking, CCD detection or center guiding requires the matching sensor setup.\u003c\/p\u003e\n\u003ch4\u003eWhat actuator is included?\u003c\/h4\u003e\n\u003cp\u003eThe included actuator is PD-204L150T, with 150 mm stroke, 2KN \/ 200 kgf thrust and 40 mm\/s maximum speed.\u003c\/p\u003e\n\u003ch4\u003eWhat sensor is included?\u003c\/h4\u003e\n\u003cp\u003eThe included sensor is the US-400S ultrasonic edge sensor for non-contact web edge detection on suitable non-breathable materials.\u003c\/p\u003e\n\u003ch4\u003eWhat power input does the set use?\u003c\/h4\u003e\n\u003cp\u003eThe included power supply accepts 100-240V AC input and outputs 24V DC for the control system.\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Standardtittel","offer_id":43370967072857,"sku":"FMF-EPC-A12SR-81497","price":589.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sf1b803765c934cb0a6cbfb930989beb5i.webp?v=1780391154"},{"product_id":"epc-a10-servo-web-guiding-system-edge-line-position-controller-with-color-mark-sensor-pd-204l150t-servo-actuator","title":"EPC-A10 Servo Web Guide System with Color Mark Sensor","description":"\u003csection\u003e\n\u003ch2\u003eEPC-A10 Servo Web Guide System\u003c\/h2\u003e\n\u003cp\u003eThis EPC-A10 servo web guiding system is supplied as a web position control kit for edge-following, line-following, and center-alignment applications. The set includes an EPC-A10 controller, PS-260 color mark sensor, PD-204L150T servo actuator, DC24V power supply, mounting accessories, cables, and user manual.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eIncluded Components\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEPC-A10 servo web guide controller: 1 pc.\u003c\/li\u003e\n\u003cli\u003ePS-260 color mark sensor: 1 pc.\u003c\/li\u003e\n\u003cli\u003ePD-204L150T servo actuator with 150 mm stroke: 1 pc.\u003c\/li\u003e\n\u003cli\u003eDC switching power supply, AC 110-240V input to DC 24V output: 1 pc.\u003c\/li\u003e\n\u003cli\u003eMounting accessories and cables: 1 set.\u003c\/li\u003e\n\u003cli\u003eUser manual: 1 pc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eKey Functions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSupports edge-following, line-following, and center-alignment guiding modes.\u003c\/li\u003e\n\u003cli\u003eWorks with the included PS-260 color mark sensor and supports other sensor configurations such as photoelectric, ultrasonic, or CCD sensors when configured for the application.\u003c\/li\u003e\n\u003cli\u003eDesigned for continuous web guiding where material edge, printed line, or color mark position needs correction during running.\u003c\/li\u003e\n\u003cli\u003eUses a DC servo driver with no-overshoot integral variable PI control.\u003c\/li\u003e\n\u003cli\u003eStores up to 10 groups of material parameters for changeover.\u003c\/li\u003e\n\u003cli\u003eSupports Simplified Chinese, Traditional Chinese, and English menu languages.\u003c\/li\u003e\n\u003cli\u003eSupports Modbus communication and PLC\/HMI networking control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable border=\"1\" cellpadding=\"8\" cellspacing=\"0\" style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth style=\"text-align: left;\"\u003ePart\u003c\/th\u003e\n\u003cth style=\"text-align: left;\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eEPC-A10 controller\u003c\/td\u003e\n\u003ctd\u003eDC servo driver, DC 24V \/ 5A power, 24V PWM output, 0.5 ms response time, 12-bit AD analog sampling, operating temperature -10°C to +60°C, weight 1.2 kg.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePS-260 color mark sensor\u003c\/td\u003e\n\u003ctd\u003e10-30 VDC power, 15 mm operating distance, +\/-3 mm depth of field with standard 15 mm lens, MARK\/BKGD setting buttons, analog 0-5V output signal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePD-204L150T actuator\u003c\/td\u003e\n\u003ctd\u003e2000 N max thrust, 200 kg driving load, 150 mm stroke range (+\/-75 mm), 40 mm\/s max driving speed.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSensor And Material Notes\u003c\/h2\u003e\n\u003cp\u003eThe included PS-260 color mark sensor is suitable for color mark, line, and contrast-based web guiding tasks. Other sensor types can be configured for different materials: ultrasonic sensors are often selected for transparent film or dusty environments, while CCD and photoelectric sensors may fit edge or line tracking depending on the material and installation.\u003c\/p\u003e\n\u003cp\u003eConfirm the web material, guiding mode, sensor type, actuator load, stroke requirement, and controller wiring before ordering or replacing an existing EPC system.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eCommon Applications\u003c\/h2\u003e\n\u003cp\u003eThis system is used in web handling equipment where moving material needs edge, line, or center position correction, including packaging, printing, paper, textile, metal sheet, film, and automated material handling applications.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is included in this EPC-A10 web guide system?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes the EPC-A10 controller, PS-260 color mark sensor, PD-204L150T servo actuator, DC24V power supply, mounting accessories, cables, and user manual.\u003c\/p\u003e\n\u003ch3\u003eWhich guiding modes does it support?\u003c\/h3\u003e\n\u003cp\u003eIt supports edge-following, line-following, and center-alignment modes.\u003c\/p\u003e\n\u003ch3\u003eWhat is the actuator stroke?\u003c\/h3\u003e\n\u003cp\u003eThe included PD-204L150T actuator has a 150 mm stroke range, listed as +\/-75 mm.\u003c\/p\u003e\n\u003ch3\u003eCan it use other sensors?\u003c\/h3\u003e\n\u003cp\u003eYes. The product notes state that other sensors are also available, including photoelectric, ultrasonic, and CCD sensor configurations. Confirm the material and tracking requirement before selecting another sensor.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Standardtittel","offer_id":43370967138393,"sku":"FMF-EPC-A10-47033","price":692.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/970ce614-540d-4a03-a9ca-207768095163.png?v=1781282446"},{"product_id":"epc-a10-servo-web-guide-system-line-edge-position-controller-pd-803l200-actuator-800kg-200mm-us-500-ultrasonic-sensor","title":"EPC-A10 Servo Web Guide System with PD-803L200 Actuator and US-500 Ultrasonic Sensor","description":"\u003cdiv class=\"wrap\"\u003e\n  \u003cdiv class=\"card\"\u003e\n    \u003ch2\u003eEPC-A10 Servo Web Guide System for Edge and Line Position Control\u003c\/h2\u003e\n    \u003cp\u003eThe EPC-A10 web guide system is supplied as a matched set for roll-to-roll edge or line position correction. This configuration includes the EPC-A10 controller, a PD-803L200 servo actuator with 800kg thrust and 200mm travel, and a US-500 ultrasonic sensor.\u003c\/p\u003e\n\n    \u003cdiv class=\"grid\"\u003e\n      \u003cdiv class=\"box\"\u003e\n        \u003ch3\u003ePackage Includes\u003c\/h3\u003e\n        \u003cul\u003e\n          \u003cli\u003eEPC-A10 correction controller: 1 pc\u003c\/li\u003e\n          \u003cli\u003ePD-803L200 servo actuator: 1 pc\u003c\/li\u003e\n          \u003cli\u003eUS-500 ultrasonic sensor: 1 pc\u003c\/li\u003e\n          \u003cli\u003e100-240V AC input power supply: 1 pc\u003c\/li\u003e\n          \u003cli\u003eConnecting cables: 3 pcs\u003c\/li\u003e\n          \u003cli\u003eBracket mount: 1 pc\u003c\/li\u003e\n        \u003c\/ul\u003e\n      \u003c\/div\u003e\n      \u003cdiv class=\"box\"\u003e\n        \u003ch3\u003eBest-Fit Use\u003c\/h3\u003e\n        \u003cp\u003eUse this servo web guide controller set when a production line needs automatic edge-following, line-following, or center-alignment correction for moving web materials. The listed applications include paper and packaging converting systems such as bag-making machines, box-making machines, slitters, cutters, copy paper machines, rollers, winders, feeders, and conveyors.\u003c\/p\u003e\n      \u003c\/div\u003e\n    \u003c\/div\u003e\n\n    \u003ch3\u003eController and System Features\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eThree operating modes: edge-following, line-following, and center-alignment.\u003c\/li\u003e\n      \u003cli\u003eSupports ultrasonic, photoelectric, color mark, and CCD sensor configurations. This set includes the US-500 ultrasonic sensor.\u003c\/li\u003e\n      \u003cli\u003eHigh-speed 32-bit CPU with DC servo driver control.\u003c\/li\u003e\n      \u003cli\u003eNo-overshoot integral variable PI algorithm for fast deviation correction.\u003c\/li\u003e\n      \u003cli\u003eAutomatic travel measurement, reducing the need for a mechanical limit switch.\u003c\/li\u003e\n      \u003cli\u003e0.5 ms PWM response time.\u003c\/li\u003e\n      \u003cli\u003e12-bit AD sampling at 700,000 samples per second.\u003c\/li\u003e\n      \u003cli\u003eFIR digital filtering and return difference filtering for more stable signal handling.\u003c\/li\u003e\n      \u003cli\u003eStores 10 groups of parameters for material changeover.\u003c\/li\u003e\n      \u003cli\u003eSupports Modbus and PLC\/HMI networking control.\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003ch3\u003eKey Specifications\u003c\/h3\u003e\n    \u003ctable style=\"border-collapse:collapse;border:1px solid #dddddd\" border=\"1\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eController model\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eEPC-A10\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl method\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC servo driver\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eController power\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC 24V \/ 5A\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC 0-5A\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eControl output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e24V\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePWM response time\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.5 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eEnvironment\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e-10 to 60C, below RH90%\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eController weight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1.2 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n\n    \u003ch3\u003eIncluded US-500 Ultrasonic Sensor\u003c\/h3\u003e\n    \u003ctable style=\"border-collapse:collapse;border:1px solid #dddddd\" border=\"1\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUS-500\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower supply\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC 12V\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower output\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eDC 0-5V\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetection range\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetection accuracy\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDetection method\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUltrasonic exposure\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFrequency\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShell material\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n\n    \u003ch3\u003ePD-803L200 Servo Actuator\u003c\/h3\u003e\n    \u003ctable style=\"border-collapse:collapse;border:1px solid #dddddd\" border=\"1\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePD-803L200\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTravel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e200mm\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eThrust\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e800kg\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePushing load\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8000kg\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaximum driving speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n\n    \u003ch3\u003eSensor Options\u003c\/h3\u003e\n    \u003cp\u003eThis product is standardly supplied with the US-500 ultrasonic sensor. Photoelectric sensor, color mark sensor, and CCD sensor configurations are optional. Contact FMF Supply before ordering if your line requires a different sensor configuration.\u003c\/p\u003e\n\n    \u003ch3\u003eFAQ\u003c\/h3\u003e\n    \u003ch4\u003eWhat does this EPC-A10 web guide system control?\u003c\/h4\u003e\n    \u003cp\u003eIt controls web edge, printed line, or center position deviation by using the sensor signal, EPC-A10 controller, and PD-803L200 actuator to correct the moving material path.\u003c\/p\u003e\n    \u003ch4\u003eWhich sensor is included in this set?\u003c\/h4\u003e\n    \u003cp\u003eThe standard set includes one US-500 ultrasonic sensor. Other sensor types are optional and should be confirmed before ordering.\u003c\/p\u003e\n    \u003ch4\u003eWhat actuator is included?\u003c\/h4\u003e\n    \u003cp\u003eThis configuration includes the PD-803L200 servo actuator with 200mm travel and 800kg thrust.\u003c\/p\u003e\n    \u003ch4\u003eCan this be used for packaging converting lines?\u003c\/h4\u003e\n    \u003cp\u003eYes. The listed applications include paper and packaging converting equipment such as bag-making machines, box-making machines, slitters, cutters, rollers, winders, feeders, and conveyors.\u003c\/p\u003e\n\n    \u003cp\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 servo web guide system with PD-803L200 actuator and US-500 ultrasonic sensor detail image 1\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S5bff1e405c634361aff9094f09d18559U.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 edge line position controller detail image 2\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S43b667435a3d4f04b9729c817acecf2ba.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"PD-803L200 800kg 200mm web guide actuator detail image 3\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S6c10ffc648264322ac8ff084eecbae48P.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"US-500 ultrasonic web edge sensor detail image 4\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S303cdb617d06400c8b1d2676da43fd52J.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 servo web guide controller system detail image 5\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sa060bac1214142f098ea2149304531031.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 web guiding system component detail image 6\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S0f0a4a11c2f34b95beccaa9ec5fc9378c.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 controller and web guide actuator detail image 7\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S4c352599474440d78e96b794ddbb9733t.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"Servo edge position control system detail image 8\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S2786be71298f495f86a466c3800a1e1aj.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"Line edge position web guide controller detail image 9\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S25054d74c01f404fb46ae7b9c89eccf7j.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 web guide system specification detail image 10\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S3d45a48911f748e68eaa193f7b944984y.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"US-500 ultrasonic sensor web guide application detail image 11\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/S9335aa4fa8b44eb8aac3350561a0ee49Q.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"PD-803L200 actuator web guiding system detail image 12\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/Se6ece7d1baa34ef799f7338cf55cc492U.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 servo web guide system installation detail image 13\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sba479793555a45899ba4255fe5e39f0fH.jpg\"\u003e\u003cimg style=\"max-width: 100%; height: auto;\" alt=\"EPC-A10 edge and line position control system detail image 14\" fetchpriority=\"low\" decoding=\"async\" loading=\"lazy\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sd29fdd9f9b314058bcf69cfff6689399Y.jpg\"\u003e\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/div\u003e","brand":"FMF","offers":[{"title":"Standardtittel","offer_id":43370967203929,"sku":"FMF-EPC-A10-12569","price":1152.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S6c10ffc648264322ac8ff084eecbae48P.webp?v=1780391158"},{"product_id":"pg200a-all-in-one-servo-web-guiding-system-epc-edge-line-position-controller-with-ultrasonic-sensor","title":"PG200A All-in-One Servo Web Guide with Ultrasonic Sensor","description":"\u003csection\u003e\n\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe PG200A is an all-in-one servo web guiding system for edge and line position control on narrow web materials. It integrates the controller, driver, detector, and servo guide structure in a compact unit, with the default configuration including a US-400S ultrasonic sensor.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003ePackage Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 set PG200A all-in-one web guide system\u003c\/li\u003e\n\u003cli\u003eUS-400S ultrasonic sensor in the default configuration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf another sensor type is required, confirm the configuration before ordering.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eKey Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for accurate correction of narrow web materials.\u003c\/li\u003e\n\u003cli\u003eSuitable for label printing, packaging, and non-woven material guiding applications.\u003c\/li\u003e\n\u003cli\u003eBrushless DC servo motor drive for low-maintenance operation.\u003c\/li\u003e\n\u003cli\u003ePrecision ball screw mechanism for accurate positioning.\u003c\/li\u003e\n\u003cli\u003eCompact integrated design helps save installation space and reduce setup work.\u003c\/li\u003e\n\u003cli\u003eRoller length, width, and surface treatment can be customized for the application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003ePG200A Technical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePG-200A \/ PG200A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC220V \/ AC110V, 80W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive\u003c\/td\u003e\n\u003ctd\u003eBrushless DC servo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller length A\u003c\/td\u003e\n\u003ctd\u003e200 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller diameter B\u003c\/td\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoller width C\u003c\/td\u003e\n\u003ctd\u003e230 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase length D\u003c\/td\u003e\n\u003ctd\u003e255 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeb guide range\u003c\/td\u003e\n\u003ctd\u003e+\/-12 degrees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. tension\u003c\/td\u003e\n\u003ctd\u003e300 N\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. speed\u003c\/td\u003e\n\u003ctd\u003e40 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEnvironment\u003c\/td\u003e\n\u003ctd\u003e-10 to 60 degree C, below RH 90%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eUS-400S Ultrasonic Sensor Parameters\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eItem\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensor model\u003c\/td\u003e\n\u003ctd\u003eUS-400S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower supply\u003c\/td\u003e\n\u003ctd\u003eDC 12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput signal\u003c\/td\u003e\n\u003ctd\u003eDC 0-5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDetection range\u003c\/td\u003e\n\u003ctd\u003e8 mm (+\/-4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDetection accuracy\u003c\/td\u003e\n\u003ctd\u003e0.1 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDetection method\u003c\/td\u003e\n\u003ctd\u003eUltrasonic reflection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency\u003c\/td\u003e\n\u003ctd\u003e100 kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing material\u003c\/td\u003e\n\u003ctd\u003eAluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSelection Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUse PG200A when the 200 mm roller length, 230 mm roller width, and 300 N maximum tension match the web material and machine layout.\u003c\/li\u003e\n\u003cli\u003eChoose an ultrasonic sensor when edge detection needs to work with materials where optical contrast may be limited.\u003c\/li\u003e\n\u003cli\u003eConfirm voltage, web width, roller surface, installation space, and sensor type before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat does the PG200A system include?\u003c\/h3\u003e\n\u003cp\u003eThe default configuration is one PG200A all-in-one servo web guide system with a US-400S ultrasonic sensor.\u003c\/p\u003e\n\u003ch3\u003eWhat materials is it intended for?\u003c\/h3\u003e\n\u003cp\u003eIt is intended for narrow web material guiding, including label printing, packaging, and non-woven material applications when the machine requirements match the listed specifications.\u003c\/p\u003e\n\u003ch3\u003eCan the roller size or surface be customized?\u003c\/h3\u003e\n\u003cp\u003eThe product information supports custom roller length, width, and surface treatment. Confirm the required dimensions and surface before ordering.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Standardtittel","offer_id":43370967269465,"sku":"FMF-PG200A-78105","price":979.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sf1559b53618c4ce094ad7deae9c41208u.webp?v=1780391160"},{"product_id":"us-400s-ultrasonic-web-guide-sensor-epc-edge-detection","title":"US-400S Ultrasonisk banestyringssensor for EPC-kantdeteksjon","description":"\u003ch2\u003eUS-400S spor-type ultrasonisk banestyringssensor\u003c\/h2\u003e\n\u003cp\u003eUS-400S er en spor-type ultrasonisk sensor for EPC-banestyringssystemer. Den bruker ultrasonisk gjennomlysningsdeteksjon for å identifisere kantposisjonen til rullmatet materiale og sende korreksjonssignaler til banestyringskontrolleren.\u003c\/p\u003e\n\u003ch2\u003eNøkkeldetaljer\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModell\u003c\/th\u003e\n\u003ctd\u003eUS-400S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSensortype\u003c\/th\u003e\n\u003ctd\u003eSpor-type ultrasonisk banestyringssensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSporingsmetode\u003c\/th\u003e\n\u003ctd\u003eMotsatt kantsporing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBruk\u003c\/th\u003e\n\u003ctd\u003eKantdeteksjon for EPC-banestyringssystemer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eStrøminngang\u003c\/th\u003e\n\u003ctd\u003eDC12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUtgangssignal\u003c\/th\u003e\n\u003ctd\u003e0-5V analog utgang og to-kanals NPN-bryterutgang\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDeteksjonsområde\u003c\/th\u003e\n\u003ctd\u003e6 mm, +\/-3.0 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDeteksjonsnøyaktighet\u003c\/th\u003e\n\u003ctd\u003e+\/-0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDeteksjonsmetode\u003c\/th\u003e\n\u003ctd\u003e200K ultrasonisk gjennomlysningsdeteksjon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eKoblingsreferanse\u003c\/th\u003e\n\u003ctd\u003eBrun +12V, blå GND, hvit 0-5VDC, svart NPN1, grå NPN2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU-referanse\u003c\/th\u003e\n\u003ctd\u003eFMF-US-400S-43641\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eMaterialegnethet\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEgnet for lufttette rullematerialer som gjennomsiktig film og papir.\u003c\/li\u003e\n\u003cli\u003eIkke egnet for pustende materialer som lerret eller fiberduk.\u003c\/li\u003e\n\u003cli\u003eNyttig når fotoelektriske sensorer påvirkes av gjennomsiktig materiale.\u003c\/li\u003e\n\u003cli\u003eIngen rutinemessig manuell kalibreringsjustering er nødvendig under normal bruk etter oppsett.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBruksanvisning\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSensoren støtter én analog utgang og to bryterutganger.\u003c\/li\u003e\n\u003cli\u003eTre statusalternativer er tilgjengelige for ulike nøyaktighetskrav: 0.5 mm, 1.0 mm og 2.0 mm.\u003c\/li\u003e\n\u003cli\u003eBruk SET-tasten for å velge ønsket status, og lagre innstillingen etter kalibrering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eHva brukes US-400S til?\u003c\/h3\u003e\n\u003cp\u003eDen detekterer materialkantposisjonen i et EPC-banestyringssystem slik at kontrolleren kan korrigere baneføringen.\u003c\/p\u003e\n\u003ch3\u003eHvorfor bruke en ultrasonisk kantsensor i stedet for en fotoelektrisk sensor?\u003c\/h3\u003e\n\u003cp\u003eFor gjennomsiktige lufttette materialer påvirkes ultrasonisk kantdeteksjon mindre av materialets gjennomsiktighet enn en fotoelektrisk sensor.\u003c\/p\u003e\n\u003ch3\u003eKan den brukes med fiberduk?\u003c\/h3\u003e\n\u003cp\u003eNei. Pustende materialer som lerret og fiberduk er ikke egnet.\u003c\/p\u003e\n\u003ch3\u003eHva bør jeg bekrefte før bestilling?\u003c\/h3\u003e\n\u003cp\u003eBekreft at kontrolleren din aksepterer DC12V strøm, 0-5V analog utgang og de oppførte NPN-bryterutgangene, og kontroller sensorplasseringen i forhold til ditt nåværende banestyringssystem.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/ae01.alicdn.com\/kf\/S1a285d5605294a5c939bf5d836a8927cb.png\" height=\"auto\" width=\"750\" loading=\"lazy\" decoding=\"async\" alt=\"US-400S ultrasonic web guide sensor outline dimensions\" style=\"max-width: 100%; height: auto;\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Standardtittel","offer_id":43370967335001,"sku":"FMF-US-400S-43641","price":70.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sb93812418f6b47c4bb53fcdd4191fefdT.webp?v=1780391162"},{"product_id":"ktc812-semi-automatic-tension-controller-with-hall-sensor-coil-tension-magnetic-powder-brake-clutch-torque-control","title":"KTC812 Semi-Automatic Taper Tension Controller for Magnetic Powder Brake\/Clutch","description":"\u003csection\u003e\n\u003ch2\u003eKTC812 Semi-Automatic Taper Tension Controller\u003c\/h2\u003e\n\u003cp\u003eThe KTC812 is a semi-automatic coil diameter tension controller for reeling, winding, and web tension control systems that use a magnetic powder brake or magnetic powder clutch. It calculates coil radius change from a compatible encoder or proximity switch input, then adjusts the tension output for constant tension or taper tension control.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eMain Functions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eManual or automatic operation for coil winding and reeling control.\u003c\/li\u003e\n\u003cli\u003eAdjustable torque compensation for magnetic powder brake or clutch applications.\u003c\/li\u003e\n\u003cli\u003eAutomatic coil radius calculation from encoder or proximity switch input.\u003c\/li\u003e\n\u003cli\u003eConstant tension and taper tension control for roll-to-roll material handling.\u003c\/li\u003e\n\u003cli\u003eStores parameters for up to 9 different materials.\u003c\/li\u003e\n\u003cli\u003eAutomatic memory of system parameters and status.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eKTC812\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eController type\u003c\/th\u003e\n\u003ctd\u003eSemi-automatic taper tension controller\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower input\u003c\/th\u003e\n\u003ctd\u003eAC100-264V, 50-60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl output\u003c\/th\u003e\n\u003ctd\u003eDC0-24V \/ 4A for magnetic powder clutch or brake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInput signal\u003c\/th\u003e\n\u003ctd\u003eSpindle pulse signal, compatible with encoder or proximity switch; winding diameter reset signal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAuxiliary power\u003c\/th\u003e\n\u003ctd\u003eDC24V for proximity switch or encoder power supply\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl method\u003c\/th\u003e\n\u003ctd\u003eThickness accumulation method\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSKU\u003c\/th\u003e\n\u003ctd\u003eFMF-KTC812-47577\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eParameter Settings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInitial radius\u003c\/li\u003e\n\u003cli\u003eMaterial thickness\u003c\/li\u003e\n\u003cli\u003eTaper coefficient\u003c\/li\u003e\n\u003cli\u003eStarting compensation point\u003c\/li\u003e\n\u003cli\u003eCompensation coefficient\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is the KTC812 used for?\u003c\/h3\u003e\n\u003cp\u003eIt is used to control coil or web tension in winding and reeling systems, especially where magnetic powder brakes or clutches are used for torque control.\u003c\/p\u003e\n\u003ch3\u003eCan it work with an encoder or proximity switch?\u003c\/h3\u003e\n\u003cp\u003eYes. The listed input supports a spindle pulse signal compatible with an encoder or proximity switch, plus a winding diameter reset signal.\u003c\/p\u003e\n\u003ch3\u003eWhat output does it provide for the brake or clutch?\u003c\/h3\u003e\n\u003cp\u003eThe controller output is DC0-24V \/ 4A for a magnetic powder clutch or brake, with overcurrent protection listed in the product data.\u003c\/p\u003e\n\u003ch3\u003eWhat should I confirm before ordering?\u003c\/h3\u003e\n\u003cp\u003eConfirm your brake or clutch current requirement, signal type, machine wiring, installation space, and whether your system uses the same coil-diameter tension control method.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Standardtittel","offer_id":43370970447961,"sku":"FMF-KTC812-47577","price":66.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S4915f8d237fe4e9da61189ea90f3f3fcx.webp?v=1780391213"},{"product_id":"ps-260-reflective-color-mark-sensor-tracking-photoelectric-eye-applied-with-epc-a10-epc-d12-web-guiding-controller","title":"PS-260 Reflective Color Mark Sensor Photoelectric Eye","description":"\u003csection\u003e\n\u003ch2\u003ePS-260 Reflective Color Mark Sensor for Web Guiding\u003c\/h2\u003e\n\u003cp\u003eThe PS-260 is a reflective color mark sensor \/ photoelectric eye for mark tracking in web guiding setups. It is designed for use with EPC-A10 and EPC-D12 web guiding controllers.\u003c\/p\u003e\n\u003cp\u003eThis product includes one PS-260 sensor and one cable. The EPC controller is not included.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReflective color mark sensor \/ photoelectric eye for tracking marks on moving web materials.\u003c\/li\u003e\n\u003cli\u003eIntelligent red, green, and blue light source selection.\u003c\/li\u003e\n\u003cli\u003eSmart calibration without potentiometer adjustment.\u003c\/li\u003e\n\u003cli\u003eTracking methods listed: edge, pair tracking, and same color.\u003c\/li\u003e\n\u003cli\u003eApplied with EPC-A10 \/ EPC-D12 web guiding controller setups.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003ePS-260\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower Input\u003c\/th\u003e\n\u003ctd\u003eDC10V-30V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOutput Signal\u003c\/th\u003e\n\u003ctd\u003eAnalog 0-5V \/ switching signal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDetection Range\u003c\/th\u003e\n\u003ctd\u003e9mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDetection Accuracy\u003c\/th\u003e\n\u003ctd\u003e0.01mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDetection Method\u003c\/th\u003e\n\u003ctd\u003ePhotoelectric radiation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eResponse Frequency\u003c\/th\u003e\n\u003ctd\u003e10K\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShell Material\u003c\/th\u003e\n\u003ctd\u003eAluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection Level\u003c\/th\u003e\n\u003ctd\u003eIP64\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e170g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003ePackage Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePS-260 sensor: 1 pc\u003c\/li\u003e\n\u003cli\u003eCable: 1 pc\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is the PS-260 used for?\u003c\/h3\u003e\n\u003cp\u003eIt is used as a reflective color mark sensor \/ photoelectric eye for mark tracking in web guiding or correction setups.\u003c\/p\u003e\n\u003ch3\u003eWhich controller is it designed for?\u003c\/h3\u003e\n\u003cp\u003ethis product is used with EPC-A10 and EPC-D12 web guiding controllers.\u003c\/p\u003e\n\u003ch3\u003eWhat power input does it use?\u003c\/h3\u003e\n\u003cp\u003eThe listed power input is DC10V-30V.\u003c\/p\u003e\n\u003ch3\u003eWhat is included?\u003c\/h3\u003e\n\u003cp\u003eOne PS-260 sensor and one cable are included. The controller is not included.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003cp\u003e\n\u003cimg alt=\"PS-260 reflective color mark sensor photoelectric eye for EPC-A10 EPC-D12 web guiding detail image 1\" src=\"https:\/\/ae01.alicdn.com\/kf\/S9ac1212c6a9e44b09e1092de9c5c8ce4F.jpg\"\u003e\n\u003cimg alt=\"PS-260 color mark sensor DC10-30V specification detail image 2\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sdb731967c4af4b9cbd59038194067102D.jpg\"\u003e\n\u003cimg alt=\"PS-260 photoelectric eye analog 0-5V switching output detail image 3\" src=\"https:\/\/ae01.alicdn.com\/kf\/S947b3eb22d3844abb3292d75b8cfe360l.jpg\"\u003e\n\u003cimg alt=\"PS-260 web guide sensor package with cable detail image 4\" src=\"https:\/\/ae01.alicdn.com\/kf\/S81e758fb2e9e453191bd5d606e09b6623.jpg\"\u003e\n\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Standardtittel","offer_id":43370970480729,"sku":"FMF-PS-260-80345","price":120.48,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/6d0f95cb-ddaf-4d83-b8e9-40f82fb36a80.png?v=1781285718"},{"product_id":"us-400s-ultrasonic-edge-sensor-web-alignment","title":"US-400S Ultrasonic Edge Sensor for Web Alignment, DC12V","description":"\u003ch2\u003eUS-400S ultrasonic edge sensor for web alignment\u003c\/h2\u003e\n\u003cp\u003eThe US-400S is an ultrasonic edge sensor for web alignment, edge correction and EPC\/LPC guiding systems. It detects the edge position of rolled material with ultrasonic sensing, so transparent material is easier to handle than with photoelectric sensing.\u003c\/p\u003e\n\n\u003ch3\u003eBest-fit use\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eEdge tracking for rolled web material.\u003c\/li\u003e\n  \u003cli\u003eWeb alignment and edge correction on EPC\/LPC guide systems.\u003c\/li\u003e\n  \u003cli\u003eNon-breathable materials such as plastic film, transparent film and paper.\u003c\/li\u003e\n  \u003cli\u003eApplications that need 0-5V analog output and dual-channel switch output.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUltrasonic edge detection:\u003c\/strong\u003e Detects rolled material edge position without relying on material transparency.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDC12V power input:\u003c\/strong\u003e Designed for DC12V power. Do not connect AC220V.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e0-5V analog output:\u003c\/strong\u003e Includes analog output for edge-position signal use.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual switch output:\u003c\/strong\u003e Supports dual-channel switch output; the product label shows NPN x2 digital output.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e6 mm detection range:\u003c\/strong\u003e Detection range is 6 mm (+\/-3.0 mm).\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e0.05 mm detection accuracy:\u003c\/strong\u003e Built for precise web edge tracking.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePosition indicator:\u003c\/strong\u003e Built-in position indicator and setup button for adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eUS-400S\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct type\u003c\/th\u003e\n\u003ctd\u003eUltrasonic edge sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eTracking method\u003c\/th\u003e\n\u003ctd\u003eEdge tracking\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower input\u003c\/th\u003e\n\u003ctd\u003eDC 12V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eAnalog output\u003c\/th\u003e\n\u003ctd\u003e0-5V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eDigital output\u003c\/th\u003e\n\u003ctd\u003eDual-channel switch signal \/ NPN x2\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eDetection range\u003c\/th\u003e\n\u003ctd\u003e6 mm (+\/-3.0 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eDetection accuracy\u003c\/th\u003e\n\u003ctd\u003e+\/-0.05 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eUltrasonic transmission\u003c\/th\u003e\n\u003ctd\u003e200K\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eScan rate\u003c\/th\u003e\n\u003ctd\u003e1 ms\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection\u003c\/th\u003e\n\u003ctd\u003eIP54\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eWiring reference\u003c\/h3\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eAOUT\u003c\/th\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003e+12V\u003c\/th\u003e\n\u003ctd\u003eBrown\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eDOUT2\u003c\/th\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eDOUT1\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth scope=\"row\"\u003eGND\u003c\/th\u003e\n\u003ctd\u003eBlue\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eOrdering notes\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eUse DC12V power only. Do not connect AC220V.\u003c\/li\u003e\n  \u003cli\u003eThis sensor is intended for non-breathable materials such as plastic film, transparent film and paper.\u003c\/li\u003e\n  \u003cli\u003eFor breathable materials such as fabrics or non-wovens, contact us before ordering.\u003c\/li\u003e\n  \u003cli\u003eFor system compatibility or connector details, contact us before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003ch4\u003eWhat materials is the US-400S edge sensor best for?\u003c\/h4\u003e\n\u003cp\u003eIt is best for non-breathable web materials such as plastic film, transparent film and paper.\u003c\/p\u003e\n\n\u003ch4\u003eCan it work with transparent film?\u003c\/h4\u003e\n\u003cp\u003eYes. The ultrasonic sensing method is not affected by material transparency in the same way as a photoelectric sensor.\u003c\/p\u003e\n\n\u003ch4\u003eWhat output signals does it provide?\u003c\/h4\u003e\n\u003cp\u003eIt provides 0-5V analog output and dual-channel switch output. The product label also shows NPN x2 digital output.\u003c\/p\u003e\n\n\u003ch4\u003eWhat is the detection range and accuracy?\u003c\/h4\u003e\n\u003cp\u003eThe detection range is 6 mm (+\/-3.0 mm), and the detection accuracy is +\/-0.05 mm.\u003c\/p\u003e\n\n\u003ch4\u003eCan I use it with AC220V?\u003c\/h4\u003e\n\u003cp\u003eNo. Use DC12V power only. Do not connect AC220V.\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Standardtittel","offer_id":43370970710105,"sku":"FMF-US-400S-78649","price":73.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sc3664d99447b40089c15064be3f8d0618.webp?v=1780391217"},{"product_id":"ps-400s-photoelectric-edge-sensor-cable-epc-lpc-web-guide","title":"PS-400S Photoelectric Edge Sensor with Cable for EPC\/LPC Web Guide","description":"\u003ch2\u003ePS-400S photoelectric edge sensor for web guiding\u003c\/h2\u003e\n\u003cp\u003eThe PS-400S is a photoelectric slot edge sensor supplied with a cable for EPC and LPC web guide systems. It is used to detect the edge position of roll or web materials so the guiding controller can keep the material aligned during converting, packaging, printing, laminating, slitting, or similar web-handling work.\u003c\/p\u003e\n\u003ch2\u003eKey details\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003ePS-400S\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSensor type\u003c\/th\u003e\n\u003ctd\u003ePhotoelectric slot edge sensor \/ through-beam edge sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUse\u003c\/th\u003e\n\u003ctd\u003eEdge tracking for EPC \/ LPC web guide systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIncluded item\u003c\/th\u003e\n\u003ctd\u003e1 pc PS-400S sensor with cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePower input\u003c\/th\u003e\n\u003ctd\u003eDC 10-30V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSignal output\u003c\/th\u003e\n\u003ctd\u003eAnalog 0-5V and NPN on\/off signal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDetection range\u003c\/th\u003e\n\u003ctd\u003e8 mm, +\/-4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDetection precision\u003c\/th\u003e\n\u003ctd\u003e+\/-0.02 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProtection level\u003c\/th\u003e\n\u003ctd\u003eIP54\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHousing\u003c\/th\u003e\n\u003ctd\u003eAluminum alloy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eWhere it fits\u003c\/h2\u003e\n\u003cp\u003eThis sensor is intended for edge-position detection in web guiding and web alignment systems. It is a practical replacement or spare sensor when the machine requires a PS-400S photoelectric edge sensor with cable for EPC\/LPC correction control.\u003c\/p\u003e\n\u003ch2\u003eBefore ordering\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm that your controller or machine accepts the PS-400S signal type and wiring.\u003c\/li\u003e\n\u003cli\u003eCheck the working material and edge-tracking method against your existing web guide setup.\u003c\/li\u003e\n\u003cli\u003eCompare the connector, cable routing, and mounting position with the sensor currently installed on your machine.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eIs this the US-400S ultrasonic sensor?\u003c\/h3\u003e\n\u003cp\u003eNo. This product is for the PS-400S photoelectric edge sensor. If your application needs an ultrasonic edge sensor, check the model on your current sensor before ordering.\u003c\/p\u003e\n\u003ch3\u003eCan it be used for EPC and LPC systems?\u003c\/h3\u003e\n\u003cp\u003eYes. The PS-400S is listed here for EPC \/ LPC web guide systems, where the sensor detects the material edge for correction control.\u003c\/p\u003e\n\u003ch3\u003eWhat is included?\u003c\/h3\u003e\n\u003cp\u003ePackage includes 1 pc PS-400S photoelectric slot sensor with cable.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"PS-400S photoelectric edge sensor with cable for EPC LPC web guide system detail image 1\" decoding=\"async\" fetchpriority=\"low\" loading=\"lazy\" slate-data-type=\"image\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sd3e7e97c27e2441588bb89cb9f80c6bcz.jpg\" style=\"max-width: 100%; height: auto;\"\u003e\u003cimg alt=\"PS-400S photoelectric slot edge sensor for web guide system detail image 2\" decoding=\"async\" fetchpriority=\"low\" loading=\"lazy\" slate-data-type=\"image\" src=\"https:\/\/ae01.alicdn.com\/kf\/S01979b7825ef40969af2c7c8f727e4aeU.jpg\" style=\"max-width: 100%; height: auto;\"\u003e\u003cimg alt=\"PS-400S edge tracking photoelectric sensor cable connection detail image 3\" decoding=\"async\" fetchpriority=\"low\" loading=\"lazy\" slate-data-type=\"image\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sa4af2043d62c48c391d01b87350bec5a4.jpg\" style=\"max-width: 100%; height: auto;\"\u003e\u003cimg alt=\"PS-400S photoelectric edge sensor dimensions and mounting detail image 4\" decoding=\"async\" fetchpriority=\"low\" loading=\"lazy\" slate-data-type=\"image\" src=\"https:\/\/ae01.alicdn.com\/kf\/Sd0a5c83e922642bdbcb4cae6564c9844G.jpg\" style=\"max-width: 100%; height: auto;\"\u003e\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Standardtittel","offer_id":43370970972249,"sku":"FMF-PS-400S-40793","price":83.81,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/Sd3e7e97c27e2441588bb89cb9f80c6bcz.webp?v=1780391225"},{"product_id":"ktc838a-automatic-tension-controller-radius-taper-tension-control-2pcs-ts200-50-tension-detector","title":"KTC838A Automatisk strekkkontroller med TS200-50-detektorer","description":"\u003csection\u003e\n\u003ch2\u003eProduktoversikt\u003c\/h2\u003e\n\u003cp\u003eDen KTC838A automatiske strekkkontrolleren er en digital banestrekkkontroller for utstyr som behandler banemateriale. Dette settet inneholder én KTC838A-kontroller, to TS200-50 50kg-strekkdetektorer og kabler for å bygge et strekkontrolloppsett rundt magnetpulverbremser, magnetpulverclutch, frekvensomformere, servomotorer eller andre kompatible aktuatorer.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eSettet inneholder\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 stk. KTC838A automatisk strekkkontroller\u003c\/li\u003e\n\u003cli\u003e2 stk. TS200-50 50kg-strekkdetektorer\u003c\/li\u003e\n\u003cli\u003eKabler\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eNøkkeldetaljer\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eStøtter lukket sløyfe-strekregulering med tilbakemelding fra strekkdetektor.\u003c\/li\u003e\n\u003cli\u003eStøtter åpen sløyfe-radiusberegning via inngang fra nærhetsbryter eller encoder.\u003c\/li\u003e\n\u003cli\u003eGir radiusbasert strekkregulering og avsmalnende strekkregulering for opp- og avviklingsprosesser.\u003c\/li\u003e\n\u003cli\u003eBruker en grafisk LCD-skjerm med støtte for kinesisk og engelsk visning.\u003c\/li\u003e\n\u003cli\u003eStøtter automatisk\/manuell styring, toakset veksling og akselerasjons-\/retardasjonskompensasjon.\u003c\/li\u003e\n\u003cli\u003eStøtter standard Modbus-kommunikasjon for integrering med PLS eller berøringsskjerm når det er tilkoblet og konfigurert for applikasjonen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eTekniske spesifikasjoner\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eElement\u003c\/th\u003e\n\u003cth\u003eSpesifikasjon\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKontrollermodell\u003c\/td\u003e\n\u003ctd\u003eKTC838A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInkluderte detektorer\u003c\/td\u003e\n\u003ctd\u003e2 stk. TS200-50 50kg-strekkdetektorer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDriftsspenning\u003c\/td\u003e\n\u003ctd\u003e100-264VAC, 50\/60Hz, 100W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDetektorens strømforsyning\u003c\/td\u003e\n\u003ctd\u003eDC 10V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDetektoringang\u003c\/td\u003e\n\u003ctd\u003eTo signalinnganger for strekkdetektor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStyreutgang\u003c\/td\u003e\n\u003ctd\u003eDC 0-10V for styring av frekvensomformer, servo, forsterker eller kompatibel aktuator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrems\/clutch-utgang\u003c\/td\u003e\n\u003ctd\u003eDC 0-24V, mindre enn 4A, for styring av kompatibel magnetpulverbrems eller -clutch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog utgang\u003c\/td\u003e\n\u003ctd\u003e4-20mA-utgang for styring av kompatibel drift eller aktuator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOmgivelsestemperatur\u003c\/td\u003e\n\u003ctd\u003e-10 til 40 °C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuktighet\u003c\/td\u003e\n\u003ctd\u003e35–85 % RH, ikke-kondenserende\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKommunikasjon\u003c\/td\u003e\n\u003ctd\u003eStandard Modbus-kommunikasjonsprotokoll\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eBruksanvisninger\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBruk TS200-50-detektorene når banestrekkområdet samsvarer med 50kg-detektorkonfigurasjonen.\u003c\/li\u003e\n\u003cli\u003eBruk lukket sløyfe-regulering når direkte strekktilbakemelding fra sensorer eller lastceller er nødvendig.\u003c\/li\u003e\n\u003cli\u003eBruk radius- eller avsmalnende strekkregulering når maskinen trenger strekkkompensasjon ettersom rulldiameteren endres.\u003c\/li\u003e\n\u003cli\u003eBekreft nødvendig aktuatoreffekt før bestilling: magnetpulverbrems eller -clutch, frekvensomformer, servomotor, forsterker eller annen kompatibel styreenhet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection\u003e\n\u003ch2\u003eOfte stilte spørsmål\u003c\/h2\u003e\n\u003ch3\u003eHva følger med i dette KTC838A-tilbudet?\u003c\/h3\u003e\n\u003cp\u003eDette tilbudet inkluderer én KTC838A automatisk strekkkontroller, to TS200-50 50kg-strekkdetektorer og kabler.\u003c\/p\u003e\n\u003ch3\u003eKan den brukes til både lukket sløyfe- og åpen sløyfe-strekregulering?\u003c\/h3\u003e\n\u003cp\u003eJa. Kontrolleren kan arbeide med tilbakemelding fra strekkdetektor for lukket sløyfe-regulering, eller beregne strekk via en nærhetsbryter eller encoder for åpen sløyfe-radiusregulering når maskinen er konfigurert for dette.\u003c\/p\u003e\n\u003ch3\u003eHva bør jeg bekrefte før bestilling?\u003c\/h3\u003e\n\u003cp\u003eBekreft banestrekkområdet, detektorkapasitet, brems\/clutch-strøm, aktuatorens styresignal, koblingsmetode, og om maskinen krever radius-, avsmalnende, lukket sløyfe- eller åpen sløyfe-strekregulering.\u003c\/p\u003e\n\u003c\/section\u003e","brand":"FMF","offers":[{"title":"Default Title","offer_id":43370971758681,"sku":"FMF-KTC838A-99545","price":499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/S249b6666bd234110b98d5fe694fd5356J.webp?v=1780391242"},{"product_id":"epc-a10-web-guiding-system-kit-ps260-pd204l150t","title":"EPC-A10 Web Guiding System Kit with PS260 Color Mark Sensor PD-204L150T Actuator","description":"\u003ch2\u003eProduct Details\u003c\/h2\u003e\n\u003cp\u003eThe EPC-A10 web guiding system kit is built for edge and line position control. The kit combines an EPC-A10 controller, PS260-H RGB color mark sensor, PD204L150T servo linear actuator, 24V power supply, connection cables, and mounting hardware.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eEPC-A10 servo edge position control system for edge-following, line-following, and center-alignment operation modes.\u003c\/li\u003e\n  \u003cli\u003eController supply: DC24V; controller power label: 100W.\u003c\/li\u003e\n  \u003cli\u003eRear controller interfaces include Power DC24V, Servo Motor, Detector, EX Port, MC Port, RS485, 0-10V, and OUT terminals.\u003c\/li\u003e\n  \u003cli\u003ePS260-H RGB color mark sensor with auto tuning and DC10-30V sensor supply labeling.\u003c\/li\u003e\n  \u003cli\u003ePD204L150T precision linear actuator with 150 mm travel, 200 kg thrust, 40 mm\/s speed, and linear position encoder labeling.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003cth\u003eKit model\u003c\/th\u003e\n\u003ctd\u003eEPC-A10 with PS260-H sensor and PD204L150T actuator\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eController model\u003c\/th\u003e\n\u003ctd\u003eEPC-A10 edge\/line position controller\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eController supply\u003c\/th\u003e\n\u003ctd\u003eDC24V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eController power\u003c\/th\u003e\n\u003ctd\u003e100W\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eOperation modes\u003c\/th\u003e\n\u003ctd\u003eEdge-following, line-following, center-alignment\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eController ports\u003c\/th\u003e\n\u003ctd\u003ePower DC24V, Servo Motor, Detector, EX Port\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eTerminal signals\u003c\/th\u003e\n\u003ctd\u003eMC Port, RS485, 0-10V, OUT\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSensor model\u003c\/th\u003e\n\u003ctd\u003ePS260-H \/ PS260 RGB emission color mark sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eSensor supply label\u003c\/th\u003e\n\u003ctd\u003eDC10-30V\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eActuator model\u003c\/th\u003e\n\u003ctd\u003ePD204L150T\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eActuator travel\u003c\/th\u003e\n\u003ctd\u003e150 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eActuator thrust\u003c\/th\u003e\n\u003ctd\u003e200 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eActuator speed\u003c\/th\u003e\n\u003ctd\u003e40 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003ePosition feedback\u003c\/th\u003e\n\u003ctd\u003eLinear position encoder\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003cth\u003eProduct weight\u003c\/th\u003e\n\u003ctd\u003e12 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eEPC-A10 controller\u003c\/li\u003e\n  \u003cli\u003ePS260-H RGB color mark sensor with cable\u003c\/li\u003e\n  \u003cli\u003ePD204L150T servo linear actuator with cable\u003c\/li\u003e\n  \u003cli\u003e24V power supply\u003c\/li\u003e\n  \u003cli\u003eMounting fixture and connection hardware\u003c\/li\u003e\n  \u003cli\u003eConnection cables\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eManuals and Drawings\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/epc-a10-edge-line-position-controller-manual.pdf?v=1782826099\" target=\"_blank\" rel=\"noopener\"\u003eEPC-A10 edge line position controller manual PDF\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/pd204l150-servo-linear-actuator-dimension-drawing.pdf?v=1782826100\" target=\"_blank\" rel=\"noopener\"\u003ePD204L150 servo linear actuator dimension drawing PDF\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat actuator is included?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a PD204L150T servo linear actuator with 150 mm travel, 200 kg thrust, and 40 mm\/s speed.\u003c\/p\u003e\n\u003ch3\u003eWhat sensor is included?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes a PS260-H RGB color mark sensor for color mark detection in the web guiding system.\u003c\/p\u003e\n\u003ch3\u003eWhat controller supply voltage is required?\u003c\/h3\u003e\n\u003cp\u003eThe EPC-A10 controller is labeled for DC24V supply.\u003c\/p\u003e","brand":"FMF","offers":[{"title":"Standardtittel","offer_id":43486060904537,"sku":"EPC-A10-PS260-PD204L150T-KIT","price":695.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/files\/epc-a10-web-guiding-system-kit-powered.jpg?v=1782826288"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0718\/4354\/5177\/collections\/988e9e0b-30a6-4439-b3a2-1ceacd3feaa7.png?v=1779804820","url":"https:\/\/fmfpack.com\/nb-no\/collections\/bane-og-spenningsstyring.oembed","provider":"FMF Supply","version":"1.0","type":"link"}